Construction Of Anganwadi Building Near Government High School At Valukkuparai H / O Valukkuparai Panchayat At Madukkarai Block In Coimbatore District Under Agamt Ii 2022-23-Package No. 10 / Agamt Ii - Deviation / 2022-23
Tender Value
14.42 Lakhs
Estimated cost
Bid Submission
13 Oct 2022
0 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madukkarai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Anganwadi Building Near Government High School At Valukkuparai H / O Valukkuparai Panchayat At Madukkarai Block In Coimbatore District Under Agamt Ii 2022-23-Package No. 10 / Agamt Ii - Deviation / 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | 1. Name of the Work :Construction of Anganwadi building Near Government High School at Valukkuparai H/O ValukkuparaiPanchayat |
| 2 | Earth work excavation for foundation in all clauses of soils and sub soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and boiling out water whenever necessary et complete complying with stand. |
| 3 | Cement concrete 1:4:8 mix ( one cement four sand and eight aggregate)using 40mm gauge handbroken granite tone jelly for foundation including dewatering if found ecessary and laid in layers of not more than 15 cm thick and compacted,etc., complete comply |
| 4 | Supplying and filling in foundation and basement with filling Collected gravel in larges of not more than 15 cm thick well rammed watered and compacted including & conveyance and all labour charges etc., |
| 5 | Brick work in cm 1:5 mix(one cement and five sand )using country bricks ground maded of size 23 x 11 x 7 cm includingcuring,finishing and cost & Conveyance of all materials etc., complete. |
| 6 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations. (Below Ground Lvel) |
| 7 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations.(Sunshade ,Beams & Columns) |
| 8 | Supplying and erecting shttering including necessary support for plane surface in foundation Basement and Roof labs strutting upto 3.29M height for plane surfaces for floors for RCC column footings columns plinth beam and connected with foundations.(R.C.C Slab) |
| 9 | Supplying fabricating and placing in position of ribbed steel rods for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors etc., complete |
| 10 | RCC 1: 11/2 :3 mix using 20 mm ISS HBG metal for RCC items of work excluding items of works excludingcentering,shuttering, and ost of reinforcement grill ,out including curing etc complete and also including fixingfan clamps and ixtures in rcc works wh |
| 11 | Plastering with CM 1:3 mix 10mm thick including cost and conveyance of all materials to site and labour charges etc. complete. |
| 12 | Plastering with CM 1:5 mix 12mm thick including cost and conveyance of all materials to site and labour charges etc. complete. |
| 13 | Plastering with CM 1:3 mix 12mm thick including cost and conveyance of all materials to site and labour charges etc. complete. |
| 14 | Providing granolethic floor finish in cement concrete 1:2:4 mix using 10-12mm |
| 15 | Europeon Water Closet with all fittings and 10lit capacity flusing tank Sub data for PVC flushing tank |
| 16 | Toilet W/C white |
| 17 | Supplying and fixingP.V.C rainwater down fall pipe of 110mm dia with necessary shoes, bends,& clamps etc |
| 18 | Paving the floor with Vetrified tiles (colour and shade as directed) of size 305 mm x 305 mmx6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cementas |
| 19 | Paving the floor with Antiskid tiles of size 305x305x6mm laid in CM 1:2, 10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to suit the colour of the tiles including cost and conveyance of all materials to site and all labour charges in all etc., |
| 20 | Dadooing walls withGlazed tiles of sizes 150mm X150mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 21 | Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being \"32 to 12.5 well beated with wooden beaters for giving required slope and thicknes |
| 22 | Finishing top roof mix one course machine pressed tiles of size 23 cm x 23 cm x 2 cm approved qty with,CM.1:312 mm thick mixed with WPC at 2% by weight of cement used and top pointed with the same mortar etc |
| 23 | Supply and Fixing of Cudappah slab including cost and all labour chrges etc. |
| 24 | Distembering two coats of oil bound distember using one coat of primer coat including cost & conveyance to size and all labour charges etc., complete. |
| 25 | Painting two coats with ready mixed Exterior Emulsion paint of approved qualityand colour over a priming coat, including through scrapping,clean removel of dirt etc complete . |
| 26 | Painting two coats of new iron work with best quality synthetic enamel paint of approved quality and colour with priming coatincluding the cost all materials etc.,complete, in all floors. |
| 27 | Fabricating Supply and fixing and position of MS doors with single leave. The door outer frame will be 40x40x6mm MS angle, the shutter frame will be 35x35x6 mm, MS angle intermediate stiffner will be 35x35x6 mm with cross stiffner 25x 25x5 mm flats covere |
| 28 | Door 0.75 X 2.10 M |
| 29 | Door D1 1.00 X 2.10 M |
| 30 | Door D2 1.10 X 2.10 M |
| 31 | Window W 1.20 X 1.30 M |
| 32 | Ventilator 0.90 X 0.45 M |
| 33 | Labour charges for fixing doors along with frames in position etc complete |
| 34 | Labour charges for fixing windows and ventilators along with frames in position etc complete |
| 35 | Electrification |
| 36 | Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1\" x 1/8\" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1\" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 125 |
| 37 | Supply and fixing of 32 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing in all etc SD 144 |
| 38 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V on 7/20 GI bearer wire for service connection mains SD 65 |
| 39 | Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class \"B\") suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70 |
| 40 | Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17) |
| 41 | Wiring with 2x 1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point SD 36 |
| 42 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube(SD 89) |
| 43 | Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83 |
| 44 | Supply and fixing of 1200 mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps. SD 110 |
| 45 | Supply and fixing of 300mm (12\") sweep (lightduty) AC exhaust fan complete with necessary wall opening and making good of the wall. SD 114 |
| 46 | Provision for 1000 litre PVC Tank - 1 no0 |
| 47 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} |
AI Tender Summary
Tender Timeline
Oct 07, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender