Military Engineer Services-MES has published Provision Of Hospital Defi Furniture For Patients Of Mh Gopalpur Bldgs And Provn Of Water Pipe Line From Rushikuliya River At Gms Under Ge I Gos. Submission Date for this Tender is 02-11-2022. Water Pipe Line Tenders in gopalpur Odisha. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Oct-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-11-2022 |
| Sl. No. | Item Description |
| 1 | Almirah 1/2H 1/2S Steel with Mirror (FD-1033): All as shown on drawing. Overall size shall be 920mm long, 485mm wide and 1985mm high. The base shall be 100mm high. The base shall be made of two numbers mild steel sheet channets shape with ends covered and welded to bottom of almirah. Mild steel sheetfor channel shall be 1mm thick. the base channel shall be welded at 50mm from each end of 920mm length . Top sides back, bottom and front of almirah shall be 1mm thick mild steel sheet. Two shelves shall be provided at 350mm and 700 from bottom of almirah. A hanging rod 60mm from top shall be provided which shall be of 20mm dia steel chromium plated conduit pipe of wall thickness 1.25mm two sockets shall be provided at the end of hanging rod. Front shutters shall have two leaves .A steel chromium plated handle 100mm long shall be provided to shutters,A three way locking device shall be provided to front shutters. Each leaf of front shutter shall be hinged with three numbers butt hinges 75mm long and shutters shall be side hung. All joints and welding, fixing shall be done with standard workmanship. All steel surfaces exposed to view when placed in position shall be given two coats |
| 2 | Almirah Large Steel(FD-1031): The over all size of almirah large steel is 1900mm high, 910mm wide and 490mm deep. It shall be made of 1mm thick mild steel sheet/CRCA. All joints shall be riveted and welded throughly. The almirah shall have three shelves, one locker and one drawers with two partitions at upper half with hanging arrangement. The almirah shall have one spring action recessed handle 150mm long with built in locking arrangement fitted to cut out space in one shutter or normal handle 120mm long having three way locking system with proper workmanship. The handle of inside drawer shall be made to S shape by bending the MS sheet of front face of drawer to full length. The handle of inside locker shall be provided with two way bolt locking system having duplicate flat keys. rest all specification and dimensions are as per drg. |
| 3 | Almirah Mess Utensil(FD-93(M)): All as shown on drawing. Overall size shall be 1065mm long, 455mm wide and 1670mm high. All wood shall be of first class hard wood teak (MP). Legs shall be 50mm square at top and 40mm square at bottom and shall 1 be 100 mm high. 19mm x40mm teak wood stiffeners ahll be provided between as per drawing. |
| 4 | Board Notice (90x60) CM (HFD-2037): All as shown on drawing . Overall size shall be 900mm long and 600mm high sides, top and bottom shall be of first class hard wood teak 9mP) frame 75mmx75mm in section made to shape as shown on drawing. Green baize cloth of best quality shall be fixed on 12mm thick soft board fixed on 6mmthick commercial plywood irrespective of what is shown on drawing. Front shall have two shutters ope-able hinged on sides. Front frame of shutters shall have styles and ralls of 45mm wide and 25mm thick teakwood. Two horizontal stiffeners 19mmx25mm in section shall be provided at equal spacing as shown on drawing.One vertical stiffener 19mmx25mm shall be provided cerntrally. Glass for galzing in front shutters shall be 3mm thick fixed on shutters with 10mmx10mm teak wood beads 75mm long hinges, two to each shutter shall be provided as shown on drawing, 50mm long hasp and staple shall be provided in the center 40mmx25mmx3mm thick key plates shall be provided all as shown on drawing. All wood surfaces exposed to view when placed in position shall be french polishedwith high gloss finish, steel and iron surfaces shall be given two coatsof enamel paint over a coat of primer. |
| 5 | Box fly Proof (FD-118(M)): All as shown on drawing. Overall size shall be 1670mm long, 455mm wide any 840mm high. Bottom stand shall be made of angle iron frame and legs. Angle iron legs shall be of 40mmx40mmx6mm and 355mm longcut to shape and welded to angle iron box. Angle iron base shall be 1210mm long and 355mm wide welded together and having holes for screws for holding the fly proof box. The fly proof box shall be made of 22 G 90.7mm approx) mild steel sheet to be provided at the back sides and in partition of the box. 18mm thick block board with plastic laminated sheet, 1mm thick, shall be provided at bottom and top of fly proof box and fixed with in 20mmx20mmx3mm angle iron frame. front shuttersfour in numbers. shall be made of 12mm square tube 1mm wall thickness over which 22G mild steel sheet in the form of style and rails are fixed. 19mm squaretube of wall thickness 1.6mm shall be provided at four corners, vertically and in between where the partition sheet is placed. 22G mild steel sheet shall be welded to the 19mm square tube. Two ball catchers to each shutter shall be provided as shown on drawing. Two butt hinges 50mm, shall be fixed to shutters and 19mm square tube for facilitating proper opening and closing. fournumbers (one on each shutter) 100mm long aluminium handle shall be provided as shown on drawing. front shutters shall have wire gauge fixed with mild steel fillets 25mm wide and of 22G. 3mm dia flat headed rivets at 75mm center to center shall be provided for fixing the fillets/wire gauge in the front shutters. All steel and iron surfaces exposed to view when placed in position shall be giventwo coats of automative paint over a coat of primer after preparation of surfaces |
| 6 | Cabinet filling (HFD-2038 (TP)): As per trade patern make godrej |
| 7 | Examination Couch (HFD-2019): Overall size shall be 1895mmx510mmx830mm (LxBxH) Upholstered top two piece examination couch with section box with 3 drawers with sliding step stool, Tubular mild steel of CRCA quality urethane form, Tubular stainless steel frame and non trolley type of base head rest (450mm length x 510mm width) Upper section with 3 drawers, Lower section with 3 cabinet doors PB holder tray with 2.5 cm raised margin, provided near head rest. White/lvory white/Blue, Blue/Navy blue, finising pretreated with 7 tanks process and epoxy powder coated. |
| 8 | Rack adjustable 6 tier steel (FD-106M): Overall size shall be 915mm long deep 1905mm high. Four angles of 30mmx30mmx3mm shall be provided at four corners as vertical . Bottom and intermediate shelves shall be provided of 1mm mild steel sheet. The rack shall be enclosed with mild sheet 1mm thick on top. Sides and back fixed to angle iron with spot welding. Four angle corners 150mmx150x1mm of mild steel sheet shall be provided to front, top and bottom corners . All steel and iron surface shall be painted with spray paint of two coats of enamel paint over a coat of primer after preparation of surface as directed by GE to obtain smooth finish. |
| 9 | Rack adjustable 3 tier steel (FD-106M): Irrespective of what is shown on drg overall sizeshall be 900mm long 760mm high. The rack shall be constructed of four number mild steel angle iron up right of 14mmx14mmx3mm fitted with three shelves of mild steel sheets 1.6mm thick including top and bottom shelves. Rack shall be open all side. Three compartment tray of 75mm high fixed totop shall be provided including to 50mm in the front all steel and iron surfaces exposedto view when placed in positioned shall be painted with two coat enameled paint. Over a coat of primer after preparation of surfaces as directed by GE. |
| 10 | Receptical PVC with leadCello (HFD-2018): Dimension : Thereceptacle shall be of capacity 20 Ltr Description : The body of receptacle PVC shall be made up of thick polymer plastic of thickness not less than 2.5mm provided with swivel lid and iron handle on both side as shown in drg. Make- Cello/Tupperware or AMKO equivalent as shown in drg. |
| 11 | Stool Revolving (Adj) Steel (FD-1026): All as shown on drawing . Overall size shall be 455mm dia and 600mm high .Four legs of 25mm dia mild steel sheet pipe legs made to shape of wall thickness 1.6mm irrespective of what is shown on drawing .12mm dia mild steel bar ring shall be provided at 150mm from bottom joiningfour legs as shown on drawing. Two cast iron discs shall be provided at top of legs and at 100mm from to of legs as shown on drawing and fixed to legs with 6mm dia bolt. 25mm dia threaded steel bolt 255mm long fixed with 6mm thick steel plate 100mm dia at top of 25mm dia threaded bolt shall be provided as shown on drawing. The padded seat shall be fixed on 6mm thick, 100mm dia steel plate with screws for which four number holes are provided in steel plate. padded seat shall be 380mm |
| 12 | Shoes Rack (FD/E6/MAP/02): Overall size shall be 700mm long, 300mm wide and 880mm hig. The legs of the shoe rack shall be of 25mm dia MS pipe of 18 gauge. The five shelves of the rack shall be of 20mm dia MS pipe of 18 gauge welded to legs . The shelves shall have 3mm dia Ms rod 9 Nos in widthwise and 3 Nos in lengthwise welded to 20mm dia shelf frame. All steel surface shall be black powder coating Rest all as shown on drg. |
| 13 | Sofa Set 5 Seater with cushion (FD-281): Overall size of three seater shall be 1730mm wide, 725mm deep and 530mm high up to arm level and one seater shall be 670mm wide and 725mm dee and 530mm high up to arm. All wood to be used shall be 1st class hard teak wood. Soda set five seater shall consist of one three seater and two single seats. 10xNos of foam cushion to each set each of size 530m,mx560mmx100mm thick of 40 density coverd with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap. PVC hard rubber shoes of 25mm dia shall be provided to bottom of each leg with 20mm long screws.All wooden surface shall be polished with high gloss melamine polish in walnut shade after preparation of surface. Rest all specification and dimensions are as per drg. |
| 14 | Table 90cm x 60cm Stainless on Castur (HFD-2014): Overall size of be 900mmx 600mmx760mm, Table stainless steel with two shelves, Tubular mild stainless steel structure mounted on castors. 16 Swg for frame and 18 Swg for the Shelf. Stainless Steel tubular frame mounted on 4 castors and provided with two stainless steel shelved duly reinforced with SS push handle Stainless steel rails on all the 4 sides of the upper shelf and lower shelf (fitted with S steel bowl & bucket) 200mm dia castors. |
| 15 | Table Bed Side II Steel (HFD-2005): All as shown on drawing. Overall size shall be 400mm length x400mm widthx510mm height, tubular and Machine pressed Mild steel of CRCA quality, with press angles and channels of 18 SWG, Machine pressed mild steel sheet box with door having ventilation self locking latch mounted on square legs., Stainless stell top with raised edges of 2 cm on 3 sides, tubular steel with rubber feet, Retreated (7 stages) with Epoxy powder coated oven backed lvory white/white/Warm Grey, Wire basket attached on one side, Warm grey/ivory white/ white |
| 16 | Table Center 2 tier with glass (FD/E6/MAP/08 ): Overall size shall be 900mm long, 450mm wide and 400mm high. a) All wood to be used shall be 1st class hard teak wood. Irrespective of what is shown on drg, the top of table shall be 18mm thick BWR plywood of Grade-A with 1mm thick laminated sheet pasted over the ply with marine grade adhesive and all edges of top shall be covered with 6mm thick teak wood beading.Irrespective of what is shown on drg, one center stiffener of size 20mmx50mm shall also be provided length wise at center in between the side bottom rails 25mm dia hard rubber/PVC rings shall be fixed to the bottom of all legs with 20mm long screws. Rest all specifications and dimensions are as per drg. All wooden surface shall be polished in high gloss melamine finish of walnut shade after preparation of surfaces. |
| 17 | Teapoy (FD-278): All as shown on drawing. Overall size shall be 600mm long ,450mm wide and 540mm high. All wood to be used shall be 1st class hard teak wood ,irrespectiv of what is shown on drg,the top of table shall be 18mm thick BWR plywood of grade A with 1mm thick laminated sheet pasted over the ply withmarine gradeadhesive and all edges of top shall be covered with 6mm thick teak wood beading and center stiffner of size 20x40mm shall be provided at center of side bottom rails for extra support.PVC hard rubber shoe of 25mm dia shall also be provided to bottom of each leg with 20mm long screw . Rest all specification and dimentions are as per drg.All wooden surface shall be polised with high gloss melamine polish in walnut shade after preparation os surfaces. |
| 18 | Trestle Store room steel (FD-1043): THIS DRAWING SUPERSEDED DRAWING NO. FD-86(M) SHEET 1/1 FOR TRESTLE STORE ROOM ( STEEL) ONLY. All as shown on drawing . Overall size shall be 2440mm long, 600mm wide and 300mm high. Two long angle iron 40mmx40mmx600 of mild steel 1980mm long shall be provided 520mm apart at bottom connected with 50mmx300 flat iron bracing, four in numbers, and equally spaced with 50mmx50mmx6mm T-iron. Two flat iron mild steel bracing of 50mmx3mm shall be provided as a cross bracing joining vertical T-iron provided at four equally spaced members of T-iron. Two long mild steel angle iron 40mmx40mmx6mm of 2440mm long shall be provided at top. Two short mild steel angle iron 40mmx40mmx600 of 600mm Tength shall be proveded at both the ends of trestle. Two numbers50mmx50mmx6mm T-iron 600mm long be provided equally spaced joining two long angle iron. Four cross bracings at top shall be provided with 50mmx3mm mild steel flat iron bracing. Four mild steel flat iron stuts shall be provided to each side of the trestle. All jointing, welding and fixing shall be done in accordancewith standard workmanship. all Steel and iron work surfaces shall be painted with two coats of enamel paint over a coat of primer with spray after prepration of steel surfaces on esposed to viev when placed in position. |
| 19 | Trolly hot food (Fd-133 (M)): All as shown on drawing. Overall size shall be 1385mm long. 740mm wide and (approx) 940mm high (approx) All sheet, tubular handles etc shall be of anodized aluminium sheet body. Tubular element of 1250 volts, 230/AC/DC wattage shall be provided as shown on drawing and as directed by Engineer-in-charge. Two lower comartments with receding doors and moveable refrigerator type racks Shall be provided as shown on drawing and as directed by Engineer-in-charge.multi-stage rotary switch for heat control shall be provided as directed by Engineer-in-charge. heating chamber shall be insulated with glass wool. Stainless steel food vessel of 200mm dia wide and 20mm deep with dud setting lids shall be provided. Heavy-duty ball bearing type 200mm dia rubber wheel collapsible front counter shall be 390mm long and 500mm wide as shown on drawing. |
| 20 | Table dining 8 pers (FD/MAP-II/03 ): The overall size of the table shall be 2100x900x760mm. The table top shall be of 18mm thick pre-laminated particle board exterior grade confroming,exterior qulity as per IS:14587:1998. All woodwork shall be of 1st class teakwood of specie tectona grandies conforming to IS-1331:1971 free from dead knots and moisture content as permissible as per IS-287. 6mm thick TW lipping shall be provided on all the exposed of MDF Duly treated with french polish as specified. Powder coated MS angular plates each of 150mmx30mmx5mm thick shall be screwed to the legs as right angles with long rails and short rails. Hard nylon shoes/buffers shall be provided to each leg bottom. |
| 21 | TV Trolly (FD/E6/MAP/04 ( R )): (a) The overall size of the Trolly shall be 750x600x750mm (b) The table top and cabinet below drawer shall be of 18mm thick pre-laminated particle board exterior grade conforming IS-12823=1990 to Grade I Exterior quality & type-II (PLMDF-12 Designation) as per IS:14587:1998 (Reaffirmed 2003) (c) The Plain/prelaminated MDG board shall conform to the specific requirements given for ECO-MARK under relavant clauses of the std. (d) 5.5mm thick glass shutter shall be fitted with SS hinges & magnet catcher. (e) The whole unit shall be supported on 50mm dia PVC heavy duty twin caster wheels of approved make. (f) Decorative handles shall be of brass & 100mm long. (g) The shall be fitted with continious piano hinges and magnet catcher. (h) Rest all as per drg & specified. |
| 22 | Work Bench for Laundry (FD-145 (M)): All as shown on drawing. Overall size shall be 1500 lng. 900mm wide and 760mm high. All wood shall be first class hard wood teak (MP). Legs shall be of size 60mmx60mm in section at top and 50mmx50mm in section at bottom. Four legs shall be joined at top with 25mmx125mm in section top rails in long and short sides. 25mmx50mm in section bottom stiffeners, 100mm from bottom of legs, shall be provided joining legs in long and short sides. Viewing from front, on right hand side, a drawer of 450mm wide shall be provided intop rail. Left of drawer shall have 25mmx125mm teak wood plank joining long rails. Sides and backof drawer shall have 12mm thick teak wood plank . Front of drawer shall have 19mm thick teak wood plank. 25mmx25mm in section teak |
| 23 | Table Laboratory work bench lap type (FD-140 (M) ): All as shown on drawing. Overall size shall be 3655mm long, 900mm wide and 1485mm high. All wood shall be first class hard wood teak (MP). The table shall have three equally spaced base of 760mm long and 800mm wide having fourlegs on each corners. Legs shall beof teak wood 50mmx50mm in section and 100mm high joined together with 25mm thick 50mm high stiffeners on logn and short sides of base as shown on drawing. Two cupboards shall be prvided at each side of base and one in middle to receive white glazed sink of size 600mmx455mm. The sides and front shutters of cupboard shall be of 19mm thick block board having teak veneer face on one side ( out side). The partition Shall be of 19mm thick commercial block board. Butt hinges, 50mm long, shall be provded to shutters of cupboard (two to each shutters) . One number 75mm Long aluminium handle shall be provided to each shutter of cuboard. One ball spring catch shall be provided to shutters of supboard as shown on drawing.Half portion of cupboard shall have drawers and shelves as shown on drawing. Shelves shall be of 12mm thick pre-laminated particle board with 6mm thickteak wood edging. Drawers shall have 40mmx40mm in section bearers. sides and back of drawers shall be of 12mm thick teak wood plank. Front of drawers shall be of 19mm thick block board with teak veneer finish on one side. Bottom |
| 24 | Charpoy IP hard top (FD/MAP-II/01): Specification: Overall size shall be 1980mm long, 900mm wide and 440mm high. a) The frame of charpoy shall be made of MS hollow section piupe of 16 gauge as per specified sizes mentioned in Drg. b) Top of charpoy shall be of 12mm thick BWR ply of grade-A; Place and fix over the and fix over the stiffeners and cleat with 12 Nos of flat head bolt of 6mm dia, 50mm long nylon insert nut and round washer. c) Each leg of charpoy shall be provided with 32mmx32mmx5mm thick MS plate shall be welded at bottom of each leg. Rest all specification and dimensions are as per drg The charpoy shall be dry powder coated in black after preparation of surface. |
| 25 | Table office Clk steel (FD-1004): Legs stiffner and top rails of the made out of 25mm MS square tube 1.6mm thick. Table top of 18/19 mm thick pre-laminated particle board melamine finish decorative on side & other side with balancing coat with 4mm PVC beading all-round the tabletop irrespective of what is shown on drawings. all steel work spray painted with two coats of high gloss synthetic enamel paint over one coat of red oxied zinc chrome primer. Hard rubber shoes/rings to legs. Rest all as per drg. |
| 26 | Chair CB steel with Arms (FD-75 (M)): All as shown on drg . Overall size shall be of 535mm wide 580mm deep and 900mm high. Sheet shall be 455mm high from floor. Conduit pipe used for frame shall be 20mm dia steel tubing with wall thikness of 1.6mm. Wood shall be 1st class teak wood cane shall be done with superior qulity 2mm wide 0.4mm thick and perimeter wooven with 3.5mm cane in godrej pattern. Provide MS flate iron 20x5mm two numbers each on the bottom side of sheet and back all iron surface shall be painting with approved color over a coat of primer. Rest all as directed by Engineer-in-Charge. |
| 27 | Almirah Med steel (FD-67(M)): All as per drg and specification PBI sheet shall 1mm thick for shutter, shelf, side, back, top and bottom. Three way locking device in Godrej Pattern with CP handle 100 lomg be provided brass lock 6 lever with duplicate key of approved make to be fixed leg shall be made of MS Sheet 1.6mm bent to shape as per drg Painting shall be done with spray machine having two coat SE paint over a coat of primer of approced tint Rest all as per deg and specification. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
