Construction Of Road And Drain In Budh Vihar Tajpur Pahari In A And B In Badarpur Constituency Ac-53 ( Regd. No. 462 ) .
Tender Value
2.14 Crore
Estimated cost
Bid Submission
14 Oct 2022
0 days left
EMD
4.28 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
badarpur → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Road And Drain In Budh Vihar Tajpur Pahari In A And B In Badarpur Constituency Ac-53 ( Regd. No. 462 ) .
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50metres lead as per direction of Engineer - in- charge Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 3 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 m lead as per direction of engineer - in -charge in cement mortar. |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. All kinds of soil. |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone III) : 8 graded stone aggregate 40 mm nominal size) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 manufactured sand : 8C & D Recycled products aggregate 40mm nominal size). |
| 7 | Brick work with common burnt clay F.P.S (non modular )bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 8 | Brick work with C & D Recycled products concrete brick of size (230x110x75mm) or available size of class designation M-10 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 manufacturedsand). |
| 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in cement mortar 1:4 (1 cement : 4 coarse sand) |
| 10 | Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering all work upto plinth levelof 1:2:4 (1 cement : 2 coarse sand (zoneIII): 4 graded stone aggregate 20mm nominal size) |
| 11 | 12 mm cement plaster 1:4 ( 1 cement : 4 coarse sand ) with a floationg coat of neat cement punning. |
| 12 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement, all work upto plinth level with 1:1 ½ :3 (1 cement : 1 ½ coarse sand (zoneIII): 3 graded stone aggregate 20 mm nominal size). |
| 13 | Providing, hoisting and fixing at plinth level precast reinforced cement concrete in small lintels not exceeding 1.5m clear span at plinth level including the cost of required centering, shutteringbut excluding the cost of reinforcement with 1:1½ :3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500 D or more. |
| 15 | Providing and fixing in cement mortar 1:6(1 cement :6 coarse sand) Red sand stone slabs 30 mm thick over drains |
| 16 | Filling available excavated earth in trenches,plinth,sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layers by ramming and watering ,lead up to 50 m and lift upto 1.5 m. |
| 17 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to site to C & D waste processing plant, Shastri park or as approved by Engineer-in-charge for all leads including all lifts involved. |
| 18 | Disposal of excavation earth from site within 5 km lead bymechanical transport all means as directedby Engineer-in-charge |
| 19 | Providing and laying in position ready mixed plain cement concrete with cement content 220 kg as per approved design mix ;and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing including cost of curing admixtures in recommended proportions as per IS: 9103 accelerate/retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-chargeAll works up to plinth level M-10 grade plain cement concrete. |
| 20 | Providing and laying RMC of M-30 grade By using minimum 400kg of cement(43 grade, OPC) per cum of concrete in roads / streets manufactured in automatic RMC plant using coarse sand and graded stone aggregate of 20mm nominal size in appropriate proportion as per approved design criteria including transportation to site in transit mixer, including cost of admixture in recommended proportion as per IS9103 to accelerate/ retard setting of concrete to improve workability without impairing strength and durability as per specification including spreading and compacting mechanically by using needle and surface vibratos, leveling to required slope & camber, finishing by floating &brooming with wire brushes etc. and curing including making provision for contraction / expansion, construction of cross / longitudinal joints of size 10mm wide 50mm deep by groove cutting machine, providing and filling joints with approved joint filler and sealants, etc. complete, as per direction of Engineer in-charge. |
AI Tender Summary
Tender Timeline
Oct 06, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender