Water Resources Department-WRD has published Construction Of Anjuna Branch-1 From Ch.0.00Km To 5.36 Km Off Taking At Gravity Main Of Anjuna Distributary Of Left Bank Main Canal Of Tip At Village Assagao And Anjuna Of Bardez Taluka. Submission Date for this Tender is 18-10-2022. Canal Construction Tenders in North Goa Goa. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means in all types of strata comprising any of the material such as soil, silt, sand, clay, gravel, moorum of allvarieties, shingles, pebbles, all types of conglomerates, all types of lateriterocks, soft rock,ordinary rock,disintegrated rock,fissured / shuttered rock, decomposed or weathered rock and such all other materials in full or in parts as the case may be by adopting any approved method or methods as may be convenient or permitted including chiselling,wedging etc.but blasting prohibited in all conditions such as dry,moist, saturated submerged, foul conditions etc. including pumping or bailing out water/dewatering incl. setting out construction of shoring and bracing, removal of stump and other deleterious matter, dressing of sides and bottom and back filling the excavated earth to the extent required and disposal of excavated soil/rock at specified areas within 50 m all leads and lifts etc. as per specification & drawing anddirected by the Engineer- in- charge etc. complete. |
| 2 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 3 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:a) All works upto plinth level |
| 4 | Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinforcement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) a) All works upto plinth level |
| 5 | Centering and shuttering including struttings, propping etc. and removal of formwork for :a) Foundations, footings, bases for columns and mass concrete. |
| 6 | Providing High yield strength steel reinforcement bar (HYSD)/TMT steel reinforcement bar from secondary producers (Confirming to IS 1786 of 1986) for RCC workincluding bending, binding & placing in position in all the floors alongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member. |
| 7 | 12mm cement plaster 1:3 (1cement : 3 fine sand) |
| 8 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 . Nominal Diameter in mmm) 800 |
| 9 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .Nominal Diameter in mmj) 600 |
| 10 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .Nominal Diameter in mmi) 500 |
| 11 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .Nominal Diameter in mm h) 450 |
| 12 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 . Nominal Diameter in mm c) 200 |
| 13 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. Centrifugally cast, (spun) ductile iron pressure pipes (with socket/spigot ends) conforming to IS : 8329-2000 with cement mortar lining inside the pipe and outside zinc coat as per IS : 8329-2000 with up to date amendments suitable for jointing with rubber gasket known as TYTON joints. Class K-9 .Nominal Diameter in mm b) 150 |
| 14 | Conveying carefully from stack at site, 250m from both sides rolling and lowering in trenches, laying and jointing true to line and level and perfect linking of joints. a) Cast iron or Ductile iron or A.C. or S & S or flanged & PVC pipes. |
| 15 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS : 14846-2000 and bearing ISI mark double flanged with cap. TYPE P.N. 1.0 (Class B ) Nominal Diameter in mm l) 600 |
| 16 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS : 14846-2000 and bearing ISI mark double flanged with cap. TYPE P.N. 1.0 (Class B ) Nominal Diameter in mm k) 500 |
| 17 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS : 14846-2000 and bearing ISI mark double flanged with cap. TYPE P.N. 1.0 (Class B ) Nominal Diameter in mm j) 450 |
| 18 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS : 14846-2000 and bearing ISI mark double flanged with cap. TYPE P.N. 1.0 (Class B )Nominal Diameter in mm h)350 |
| 19 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Sluice valve conforming to IS : 14846-2000 and bearing ISI mark double flanged with cap. TYPE P.N. 1.0 (Class B ) Nominal Diameter in mm e)200 |
| 20 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc .complete as directed as perIS:2685-1971CLASS II & III. Nominal diamter in mm.a)350 |
| 21 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc .complete as directed as perIS:2685-1971CLASS II & III. Nominal diamter in mm.c) 450 |
| 22 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc .complete as directed as perIS:2685-1971CLASS II & III. Nominal diamter in mm.d) 500 |
| 23 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc .complete as directed as perIS:2685-1971CLASS II & III. Nominal diamter in mm. e) 600 |
| 24 | Hoisting laying cast iron sluice valves/butterfly valves/reflux valve of size given below at location in pipeline etc. complete as directed as perIS:2685-1971 CLASSINominal diamter in mm. e) 200 |
| 25 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valve similar to glenfield fig. H 7, or IS14845/2000 screwed on isolating valve small orifice, elastic ball resting on a bronze orifice nipple, large orifice vulcanite ball resting on a moulded seating, inlet faced and drilled BST "D" suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B) Dia in mmb) 50 |
| 26 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valve similar to glenfield fig. H 7, or IS14845/2000 screwed on isolating valve small orifice, elastic ball resting on a bronze orifice nipple, large orifice vulcanite ball resting on a moulded seating, inlet faced and drilled BST "D" suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B) Dia in mme) 100 |
| 27 | Supplying at store or site of work including railway freight, carting, loading, unloading, stacking etc. C. I. Double orifice type air valve similar to glenfield fig. H 7, or IS14845/2000 screwed on isolating valve small orifice, elastic ball resting on a bronze orifice nipple, large orifice vulcanite ball resting on a moulded seating, inlet faced and drilled BST "D" suitable to working pressure of 10 kg /cm2 TYPE P.N. 1.0 (Class B)Dia in mm f) 150 |
| 28 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST "D" suitable to working pressure of 10 kg/sq. cm.Nominal Diameter in mm Dia in mmb) 50 |
| 29 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST "D" suitable to working pressure of 10 kg/sq. cm. Nominal Diameter in mm Dia in mme) 100 |
| 30 | Fixing C.I. Double orifice / Kinetic type air valve of following sizes with bronze ferrule at inlet screwed on isolating valve small orifice elastic ball resting valve small orifice elastic ball resting on small bronze orifice nipple and large orifice vulcanite ball resting on moulded seat ring inlet faced and drilled to BST "D" suitable to working pressure of 10 kg/sq. cm. Nominal Diameter in mmDia in mmf) 150 |
| 31 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mm j3) 800x150 |
| 32 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mmm3) 800x400 |
| 33 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mm f2)600x150 |
| 34 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mm g2)600x200 |
| 35 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mm i2) 600x300 |
| 36 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mmv1)500x150 |
| 37 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mm a2)500x400 |
| 38 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mmm1)450x150 |
| 39 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mmI) 200x150 |
| 40 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. III) Double Socket Tee with Branch Flange Nominal Diameter in mm f)150x150 |
| 41 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.II. Double Socket ReducerNominal Diameter in mm e2) 800x600 |
| 42 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.II. Double Socket ReducerNominal Diameter in mm n1) 600x500 |
| 43 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.II. Double Socket ReducerNominal Diameter in mm g1) 500x450 |
| 44 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.II. Double Socket ReducerNominal Diameter in mmw) 450x200 |
| 45 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.II. Double Socket ReducerNominal Diameter in mmf) 200x150 |
| 46 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.II. Double Socket ReducerNominal Diameter in mm b)150x80 |
| 47 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. V. M.J.Collar Nominal Diameter in mm d)200 |
| 48 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. V. M.J.CollarNominal Diameter in mm I) 450 |
| 49 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. V. M.J.CollarNominal Diameter in mmj) 500 |
| 50 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. V. M.J.CollarNominal Diameter in mmk) 600 |
| 51 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. V. M.J.Collar Nominal Diameter in mmn) 800 |
| 52 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. VI)Double socket branch flange Invert tee(Scour valve) Nominal Diameter in mmj2) 600x350 |
| 53 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. VII. Double Socket Bend 90 DegreeNominal Diameter in mm J) 500 |
| 54 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. VII. Double Socket Bend 90 DegreeNominal Diameter in mmk) 600 |
| 55 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. VIII. Double Socket Bend 45 Degree Nominal Diameter in mmj) 500 |
| 56 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete. VIII. Double Socket Bend 45 Degree Nominal Diameter in mmk) 600 |
| 57 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.IX) Double Socket bend 22.5DegreeNominal Diameter in mmd)200 |
| 58 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.IX) Double Socket bend 22.5DegreeNominal Diameter in mm j)500 |
| 59 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.IX) Double Socket bend 22.5DegreeNominal Diameter in mmk)600 |
| 60 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.X) Double Socket bend 11.25DegreeNominal Diameter in mm c)150 |
| 61 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.X) Double Socket bend 11.25DegreeNominal Diameter in mmd)200 |
| 62 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.X) Double Socket bend 11.25DegreeNominal Diameter in mm I)450 |
| 63 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.X) Double Socket bend 11.25DegreeNominal Diameter in mm j)500 |
| 64 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.X) Double Socket bend 11.25DegreeNominal Diameter in mm k)600 |
| 65 | Supply at store or site of work including railway freight, carting, loading, unloading, stacking etc. Ductile Iron pipe specials including rubber ring fitting push on joints conforming to IS : 9523 with inside cement mortar lining & externally coated with zinc with finishing layer of bituminious paint complete.X) Double Socket bend 11.25DegreeNominal Diameter in mm n)800 |
| 66 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985. Nominal Diameter in mmd)150 |
| 67 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985. Nominal Diameter in mm e)200 |
| 68 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985. Nominal Diameter in mm j)450 |
| 69 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985. Nominal Diameter in mmk)500 |
| 70 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985. Nominal Diameter in mml)600 |
| 71 | Jointing of C.I/D.I pipes and specials with rubber gaskets (TYTON joints) EPDM type including cleaning the socket and spigot ends with kerosene oil/below lamp and applying soft soap to socket and spigot ends before inserting for rubber gasket jacking and fixing in proper condition including cost of rubber gasket, oil, soft soap and hydraulic testing of jointing as per IS:3144-1985. Nominal Diameter in mmo)800 |
| 72 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the joints,for pushon tight joints including the cost of work force, tools, hydraulic testing of joints etc complete as per the direction of the engineer in-charge. I.Double socketed specials such as bends, collar couplings etcNominal Diameter in mm e)200 |
| 73 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the joints,for pushon tight joints including the cost of work force, tools, hydraulic testing of joints etc complete as per the direction of the engineer in-charge. I.Double socketed specials such as bends, collar couplings etcNominal Diameter in mm i)450 |
| 74 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the joints,for pushon tight joints including the cost of work force, tools, hydraulic testing of joints etc complete as per the direction of the engineer in-charge.I.Double socketed specials such as bends, collar couplings etcNominal Diameter in mm k)500 |
| 75 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the joints,for pushon tight joints including the cost of work force, tools, hydraulic testing of joints etc complete as per the direction of the engineer in-charge. I.Double socketed specials such as bends, collar couplings etcNominal Diameter in mml)600 |
| 76 | Making joints to D.I/ C.I pipes with mechanical joints by nut bolts rubber rings that are provided with the joints,for pushon tight joints including the cost of work force, tools, hydraulic testing of joints etc complete as per the direction of the engineer in-charge.I.Double socketed specials such as bends, collar couplings etcNominal Diameter in mm n)800 |
| 77 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. welded Ductile Iron double flanged pipes - PN16 horizontally cast conforming to IS: 1537-1960in ClassK-9. Nominal Diameter in mmII ) Barrel Length of 1.0 metres a) 100 |
| 78 | Supplying at store or site of work including railway freight, carting, loading and unloading, stacking etc. welded Ductile Iron double flanged pipes - PN16 horizontally cast conforming to IS: 1537-1960in ClassK-9.Nominal Diameter in mm II ) Barrel Length of 1.0 metresb) 150 |
| 79 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts,as directed by the engineer in-charge. Nominal diamter in mm.b)100 |
| 80 | Making flanged joints for C.I./D.I. Pipes and specials with rubber insertion, nuts and bolts including necessary hydraulic testing etc. complete including cost of rubber insertion nuts and bolts,as directed by the engineer in-charge. Nominal diamter in mm. d)150 |
| 81 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel etc required for completion of job as per the direction of Engineer- in -charge Dia in mm d) 150 |
| 82 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel etc required for completion of job as per the direction of Engineer- in -charge Dia in mm e) 200 |
| 83 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel etc required for completion of job as per the direction of Engineer- in -chargeDia in mm j)450 |
| 84 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel etc required for completion of job as per the direction of Engineer- in -charge Dia in mmk)500 |
| 85 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel etc required for completion of job as per the direction of Engineer- in -charge Dia in mml) 600 |
| 86 | Cutting of cast iron / ductile iron pipes by mechanical grinder working on electricity, including the cost of hire charges of mechanical grinder, diesel operated electrical generator set, suitable for supplying power for the grinder for cutting, cost of grinding blades , skilled work force, fuel etc required for completion of job as per the direction of Engineer- in -charge Dia in mmo) 800 |
| 87 | Supplying stacking at site and conveying hoisting, laying in position to correct line and level and linking joints ofMS specials.fabricated from MS plate including cutting, bending, welding, procurement of plates, gas cutting to required size, rolling,tackwelding, assembling in suitable length toform special, welding on automatic machine and forming V edge on both ends of special as required,hydraulic pressuretest at factory to therequired test pressureconformingto IS : 3589-1991 including freightetc. completeI) With 10 mm -12 mm thick plate a) Tees, bends, reducers |
| 88 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
