Annual Periodic Maintenance Plan For The Year 2022-23 ( Pmgsy Road ) Onjibhi Bahu Gadagushaini Road Km. 0 / 00 To 20 / 00 ( Sh:- Providing And Laying Busg For Correction Layer, Bituminous Concrete In Km. 3 / 00 To 5 / 00, P / L Hot Applied Thermoplast
Tender Value
36.35 Lakhs
Estimated cost
Bid Submission
10 Oct 2022
0 days left
EMD
72800
Bank guarantee accepted
Document Fee
1500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Annual Periodic Maintenance Plan For The Year 2022-23 ( Pmgsy Road ) Onjibhi Bahu Gadagushaini Road Km. 0 / 00 To 20 / 00 ( Sh:- Providing And Laying Busg For Correction Layer, Bituminous Concrete In Km. 3 / 00 To 5 / 00, P / L Hot Applied Thermoplastic Edge Line & C / O P.C.C. Hill Side Drain ) .
BOQ
| Sl. No. | Item Description |
| 1 | Providing, laying and rolling of built-up spray grout layer over prepared base consisting of a two layer composite construction of compacted crushed coarse aggregates using motor grader for aggregates. Key stone chips spreader may be used with application of bituminous binder after each layer, and with key aggregates placed on top of the second layer to serve as a base, conforming to the line, grades and cross-section specified, the compacted layer thickness being 75 mm ( Seventy five Millimetre ) as per MORTH Specification Clause 506with bitumen (VG-10)within all leads and liftsincluding carriage of materials and as per direction and entire satisfaction of Engineer-in-Charge. |
| 2 | Providing andLaying tack coat with Bitumen emulsion (medium setting) using emulsion distributor at the rate 0.25 to 0.30kg (Zero point two five to zero point three zero Kelograme ) per Square metre on the prepared dry and hungry bituminous/granular surface cleaned with hydroulic broom as per MORTH specification clause 503. within all leads and liftsincluding carriage of material and as per direction and entire satisfaction of Engineer-in-Charge. |
| 3 | Providing and laying 30 mm (thirty milimetre) thickbituminous concretewith 100-120 TPH batch type hot mix plant producing an average output of 75( seventy five) tonnes per hour using crushed aggregates of specified grading-II 13mm (thirteen milimetre), premixed with bitumen (VG-10 ) @ 5.4 to 5.6( five point four to five point six) percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete including profile correction layer and patching of pot holes in all respectwithin all leads and liftsincluding carriage of material and as per direction and entire satisfaction of Engineer-in-Charge. |
| 4 | Providing and laying of hot applied thermoplastic compund 2.5 mm (two point five milimetre) thick including reflectorising glass beads @250 (two hundred fifty)gms per sqm area, thickness of 2.5 mm(two point five milimetre) is exclusive of surfce applied glass beads as per IRC:35. The finished surfce to be level, uniform and free from streaks and holes as per MORTH specification clause 803 including carriage of all labour equipments and materials to various locations through all modes of transportations in all leads and lifts and incidentals charges andas per direction and entire satisfaction ofEngineer-in-charge. |
| 5 | Construction of hill side drain 0.45x0.25 mtr. (Zero point four five into Zero point two five) laying 10 cm (Ten centimetre) thick in PCC grade M-10 (M-ten) in accordance with the requirementof specification true to line and grade. Dimension and other particular as per drawing and technical specification including carriage material within all leads and lifts and as per direction and entire satisfaction of Engineer-in-Charge. |
AI Tender Summary
Tender Timeline
Oct 05, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 10, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 11, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender