Supply, Installation, Testing And Commissioning Of Electro-Mechanical Components At Water Supply Scheme Kanipora Of Jal Shakti ( Phe ) Mechanical Division Srinagar- Supply, Installation, Testing And Commissioning Of Horizontal Pumping Unit As Per Is 1520 With Following Specification:-Pump:- Discharge : 15000 Gphdynamic Head: 40 Meterstype :- Horizontal Split Casing / Multistage Speed= 1440- 1500 Rpmmaterial Of Construction1.Impeller:- Stainless Steel / Bronze / Cf8m2.Shaft:-Ss4103.Pump Casing:- Cast Ironthe Pump Shall Confirm To Is-1520 Code Motor :A ) Type :- Horizontal Squirrel Cage Induction Type B ) Rating:- As Per Oem.C ) No Of Phases: 3 Phase 415 V+10%, 50 Hz, Ac Supplyd ) Winding:-Copper Wound Squirrel Cagee ) Type Of Enclosure:-Tefcf ) Method Of Cooling:- Air Cooled With Fan Mounted G ) Method Of Starting: Star Deltamanufactures Test Certificate To Be Appended Rest Of Specification / Details Are As Per S. No. 1 Of Technical Annexure A 2 Supply, Installation, Testing & Commissioning Of Heavy Duty Dredging Pumping Unit As Per Is 5600 Pump: - Rated Discharge =20000 Gphrated Head = 30 Mtrs Type Of Pump : Submersible Vertical Pumpdepth Of Submergence = 15 Mtrs • Solid Handling Capacity: 30Mm ( Minimum ) Material Of Construction:• Pump Casing : Cast Iron • Impeller : Stainless Steel / Bronze / Cf8m • Agitator : Stainless Steel• Pump Shaft: Stainless Steel • Motor Body : Cast Iron• Sealing : Dual Mech. Seal Ü The Bowl Plate Shall Be Provided With Name Plate Depicting All Specifications Motor: - • Rating : As Per Oem • Speed 1440-1500 Rpm • Method Of Starting: Star – Delta. • Frequency: 50Hz + 3%• Voltage: 415 ± 15% V• Class Of Insulation: Suitable For Above Rating.Manufactures Test Certificate To Be Appended Rest Of Specification / Details Are As Per S. No. 2 Of Technical Annexure A 3 Design, Supply, Providing, Installation, Successful Testing And Commissioning Of Vertical Turbine Pumping Unit As Per Is 1710 Driven By Vt Motor For Pumping Water From Doodh-Ganga Nallah Of Following Parameters.• Type Of Water = Raw Water Having Specific Gravity Of Unity Average.• Quality Of Water = Raw Water With Silt Having Medium To Coarse Sand.A. Pump1. Discharge = 30000 Gph2. Type = Self Water Lubricated, Vt Pump, Open Line Shaft.3. Rpm = 1450-14704. Head = 48 Mtrs5. Efficiency = Not Less Than 60%6. Impeller = Semi-Enclosed Mixed Flow Moc: Bronze / Stainless Steel 7. Impeller Shaft = Stainless Steelvt Pump To Be Designed With Minimum Number Of Stages. B. Prime Mover1. Type = Vertical Hollow Shaft, Ac Squirrel Cage Induction Motor 2. Power Supply = 03 Phase, 415V + 10% Ac3. Frequency = 50Hz + 3%4. Rpm = 1450 Synchronous5. Efficiency = Not Less Than 90%6. Hp = As Per Oem7. Class Of Insulation = H11. Method Of Starting = Star / Deltarest Of Details / Technical Specification As Per S. No. 3 Of Technical Annexure A 4 Supply, Installation, Testing And Successful Commissioning Ms Pipes Used As Rising Main Of Following Specifications;Size: Dn 200Thickness: 8Mmrest Of Details / Technical Specification As Per S. No. 4 Of Technical Annexure A 5 Supply, Installation, Testing And Successful Commissioning Ms Pipes Used As Rising Main Of Following Specifications;Size: Dn 150Class: Crest Of Details / Technical Specification As Per S. No. 5 Of Technical Annexure A 6 Supply, Installation, Testing & Commissioning Of G.I Pipe Of Nd 25Mm To Be Used As Priming Line To Horizontal Pumps. The Pipe Shall Be Hot Dip Galvanized, Class-B Confirming To Is 1239. The Job Includes Providing And Fitting Of Sockets For Fitting The Pipe As Per Site Requirement.Rest Of Details / Technical Specification As Per S. No. 6 Of Technical Annexure A 7 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) In Trenches For Foundation, Drains, Pipes, Cables ( Not Exceeding 1.5 M In Width ) And For Shafts, Wells, Cesspits And The Like Not Exceeding 10 Sqm On Plan, Including Dressing Of Sides And Reaming Of Bottom Lift Up To 1.5 M, Including Getting Out Excavated Earth And Disposal Of Surplus Excavated Earth As Directed. This Includes Excavation For Dismantling Of Old Pipes. ( All Kinds Of Soil 01 Meter From Cutting Edge ) 8 Filling Available Excavated Earth In Trenches, Plinth, Sides Of Foundation Etc. In Layers Not Exceeding 20 Cm In Depth, Consolidating Each Deposited Layer By Reaming And Watering, Lead Up To 50 M And Lift Up To 1.5M. 90% Of Above 9 Providing And Laying In Position Cement Concrete Of Specified Grade Including Curing But Excluding The Cost Of Centring And Shuttering. All Work Upto Plinth Level With 1: 2: 4 Mixes ( 1 Cement, 2 Coarse Sands, 4 Graded Stone Aggregate 20 Mm Nominal Size ) For The Foundation Of Horizontal Pumping Unit And Saddle / Thrust Blocks As Per Site Requirement 10 Supply, Installation, Testing & Commissioning Of Long Raduis Bend Out Of 1 Mtr Of Ms Pipe ( C Class ) With Length Of 1 Ft Each Arm. The Job Includes All Types Of Skilled Labours, Arrangement Of Power Supply / Diesel Generator Set Etc Required For The Job Including P / F Of Suitable Size Nuts Bolts And R.I Gasket In The Flanged Joints.Size: Dn 200Class: C ( Heavy ) Rest Of Specification / Details Are As Per S. No. 7 Of Technical Annexure A 11 Supply, Installation, Testing & Commissioning Of Washout Tee. The Tee Shall Be Fabricated Out Of G.I Pipe With M.S Flanges Conforming To Bis 6392 / 1997 Table 17 ( Rating Pn16 ) Fastened With Weld Joints On Three Ends. Size: Dn 100Class: C ( Heavy ) Rest Of Specification / Details Are As Per S. No. 8 Of Technical Annexure A 12 Supply, Installation, Testing & Commissioning Of Ductile Iron Double Flanged, Non-Rising Spindle Soft Seated Glandless Gate / Sluice Valves As Per Bs 5163 Part 1 And Part 2 / En 1074 Part 1 & 2 For Regulating The Water Supply Outside The Pumping Units. Rest Of Specification / Details Are As Per S. No. 9 Of Technical Annexure A 13 Size:Dn 100Pn:1.6 / 16 14 Size:Dn 150Pn:1.6 / 16 15 Size:Dn 200Pn:1.6 / 16 16 Supply, Installation, Testing & Commissioning Of Ductile Iron Double Flanged, Slanted Seat Swing Check Valve ( Nrv ) As Per En 1074 Part 3 Rest Of Specification / Details Are As Per S. No. 10 Of Technical Annexure A 17 Size: Dn 100Pn: 1.6 / 16 18 Size: Dn 150Pn: 1.6 / 16 19 Size: Dn 200Pn: 1.6 / 16 20 Supply, Installation, Testing & Commissioning Of Gun Metal Gate Valve With C.I. Wheel Of Approved Quality ( Screwed End ) To Be Fitted On Priming Line. The Job Includes Providing And Fixing G.I. Union In G.I. Pipe Including Cutting And Threading The Pipe And Making Long Screws Etc. For Each Gate Valve. The Job Includes Use Of Labour, Tools Tackles Etc. For Completion Of Job. 21 Supply, Installation, Testing & Commissioning Of Arv ( Air Release Valve ) As Per En 1074 Part 4 To Be Fitted To G.I Rising Main.Size: 50Mmpn: 1.6 / 16Rest Of Specification / Details Are As Per S. No. 11 Of Technical Annexure A 22 Providing, Fabrication, Fitting And Commissioning Of Structural Steel Work In Single Section, Fixed With Or Without Connecting Plate, Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete. The Drawings And Dimensions Will Be Provided By Site In Charge At The Time Of Execution Of Jobrest Of Specification / Details Are As Per S. No. 12 Of Technical Annexure A 23 Supply, Installation, Testing & Commissioning Of Modular Control Panel Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories Mu-G75 And Rest Of Details / Technical Specification As Per S. No. 13 Of Technical Annexure A 24 Supply, Installation, Testing & Commissioning Of Modular Control Panel ( For Dredging / Sludge Pump ) Of Appropriate Size Fabricated Out Of 14Swg Sheet Having Required Openings / Vents And Protection Class: Ip-55 And Fitted With Accessories A. Incomer Mccb = 200Ampere, 4Pole, With Sc Breaking Capacity Of 50Kab. Mccb With Motor Protection Backup= 160A, 3 Pole With Sc Breaking Capacity Of 50Kab. Fully Automatic Star Delta Starter With Relay Range Of 45-75 Ampered. Ammeter And Voltmeterrest Of Specification / Details Are As Per S. No. 14 Of Technical Annexure A 25 Supply, Installation, Testing & Commissioning Of Manually Operated Copper Wound, 3-Phase, Ac Power Supply Multi Step Voltage Stabilizer.Manufacturers Test Certificate To Be Appended And Rest Of Details / Technical Specification As Per S. No. 15 Of Technical Annexure A 26 Rating: 50 Kva 27 Rating: 75 Kva 28 Supply, Installation, Testing & Commissioning Of Single Core Copper Cable For Interconnecting Various Electrical Gadgets As Per Is 694: 2010 Along With Thimbling As Per Requirement.As Per S. No. 16 Of Technical Annexure A 29 70 Sq Mm 30 Supply, Installation, Testing & Commissioning Of Cable Tray Of 150Mm Size For Carrying The Cable Inside The Machinery Room. Job Incudes P / F Of Geyser Bolts, Nuts Washers Etc. As Per S. No. 17 Of Technical Annexure A 31 Supply, Installation, Testing & Commissioning Of Earthing Station For Substation, Lt Panel, Dg Set And Stabilizer Comprising Of Company Fabricated Earthing Electrode As Per Is: 3043. Rest Of Specifications / Details Are As Per S. No. 18 Of Technical Annexure A 32 Supply, Installation, Testing & Commissioning Of 6 Kg Co2 Type Fire Extinguisher Manufactured As Per Is:15683 Of 2006 With Is Mark And Comply With Dgms ( Approval ) .Rest Of Details As Per S. No. 19 Of Technical Annexure A 33 Illumination Of Premises:Providing And Erection, Testing & Commissioning Of 9 Mtr Long Hot Dip Galvanized Octagonal Pole ( Single Section ) With Bottom 150Mm, Top 75Mm Wide, Thickness 3Mm With 70 Microns Zinc Coating Having Inside Arrangement For Providing Of Power Connection Along With Following Items.1 ) 01 No Mcb 16 Amp. 2Polerest Of Details / Technical Specification As Per S. No. 20 Of Technical Annexure A 34 Providing, Installation, Testing And Commissioning Of Area Lighting 120 Watt Led ( Street Light Type ) On Top Of Octagonal Pole Having Following Specs:Input: 90-240 V 50 Hzpower Factor: >0.9Rest Of Details / Technical Specification Are As Per S. No. 21 Of Technical Annexure A 35 Providing, Installation, Testing & Commissioning Of Junction Box With Dp 32Amp Mcb To Serve As Amin Switch For Led Lighting.Rest Of Details / Technical Specification Are As Per S. No. 22 Of Technical Annexure A 36 Providing, Installation And Testing Of 5Kva Fully Automatic Voltage Stabilizer Rest Of Details / Technical Specification Are As Per S. No. 23 Of Technical Annexure A 37 Supply, Installation, Testing & Commissioning Of 1000Va Full Sine Wave Power Inverter With 12V, 180Ah Tubular Inverter Battery Rest Of Details / Technical Specification Are As Per S. No. 24 Of Technical Annexure A 38 Providing, Laying & Fixing With Adhesive / Bonding Material Of Insulation Rubber Mats On The Floor Of The Pump House, Covering Area Around Electro-Mechanical Machinery For Safeguarding The Life & Limb Of The Workmen.Rest Of Details / Technical Specification Are As Per S. No. 25 Of Technical Annexure A 39 Tool Kit For Maintenance: -The Tool Kit For Maintenance As Per Detailed Specification As Per S. No. 26 Of Technical Annexure A 40 Providing Of Good Quality Convenience And Utility Items As Per S. No. 27 Of Technical Annexure A 41 Fabrication Of 7’ ( L ) X 6’ ( B ) X 1.5 ( H ) Angle Iron Bed For Operators With Back-Height Of 2 Feet. The Detailed Drawing Will Be Provided By Site In Charge. ( 01Nos ) Rest Of Details / Technical Specification Are As Per S. No. 28 Of Technical Annexure A 42 Providing And Fitting Of 19 Mm Thick Multilayered Ply To Ply Sheet Of Size 6 X 3 Feet, 3 Nos.Rest Of Details / Technical Specification Are As Per S. No. 29 Of Technical Annexure A 43 Providing Of Solar / Electrical Lantern Chargeable On Both Solar & Electrical 220V Supply.Rest Of Details / Technical Specification Are As Per S. No. 30 Of Technical Annexure A 44 Providing Of Foldable, Portable & Compact Aluminum Telescopic Ladder, En131 Certified.Rest Of Details / Technical Specification Are As Per S. No. 31 Of Technical Annexure A 45 Providing Of Industrial Rubber 11 Kv Electrical Hand Shock Proof Safety Gloves For Handling Electrical Equipment’S / Connections. 46 Providing And Fitting Of 02 No. Angle Iron / Sheet Metal Board Duly Painted Showing Various Specifications Of The Mechanical And Electrical Equipment’S Installed At Site And The Name Of Water Supply Schemesize= 7X5 Feet & 2X5 Feet ( 02 Nos Each ) Rest Of Details / Technical Specification Are As Per S. No. 32 Of Technical Annexure A 47 Supply, Installation, Testing & Commissioning Of 250 Ampere 4Pole Side Operated Off-Load Changeover Switch In Separate Ss Enclosure As Per S. No. 33 Of Technical Annexure A 48 Supply, Installation, Testing & Commissioning Of 11 / 0.433 Kva, 3 Phase Distribution Transformer With Bimetallic Terminal Connectors Energy Level -2 Aluminum Wound Specifications Conforming To Is: 1180 ( Part 1 ) 2014 With Latest Amendments Type Of Cooling: Onan.Rating: 100 Kva Ht Transformer, 3 Phase ( Level 2 ) .Manufacturers Certificate Be Appended And Rest Of Specification / Details Are As Per S. No. 34 Of Technical Annexure A 49 Supply, Installation, Testing & Commissioning Of Lt Distribution Box For Ht Transformer Capacity Of Transformer: 100 Kvarest Of Details / Technical Specification As Per S. No. 35 Of Technical Annexure A 50 Providing And Fixing G.I. Chain Link Fencing Of Required Width In Mesh Size 25X25 Mm Made Of G.I. Wire Of Dia 3 Mm Including Strengthening With 2 Mm Dia Wire Or Nuts, Bolts And Washers As Required Complete As Per The Direction Of Engineer-In-Charge. 51 Dismantling 200Mm Old Ms Pipes Manually / By Mechanical Means By Cutting The Welded Joints, Including Stacking Of Pipes And Lead At Site Upto 3Kms Lead As Per Direction Of Engineerin-Charge.
