Construction Of Office Cum Residential Quarter At Durbuk Sub-Division Changthang Of Pdd
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
durbuk → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Office Cum Residential Quarter At Durbuk Sub-Division Changthang Of Pdd
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: |
| 2 | Soling of stone including costs of stone and preparing of bed for PCC |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. |
| 5 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 6 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundation,Plinth Beam, footing bases of column |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers. |
| 8 | Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts. |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 10 | Centering and shuttering including strutting, propping etc. and removal of form for: Stairs (excluding landings) except spiral staircases. |
| 11 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc. upy floor five level excluding cost of centering, shuttering, finishing and reinforcement: (1:1.5:3) 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). |
| 12 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 13 | Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. (Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 14 | Providing and fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in position in cement mortar 1:3 , costof required centering centering, shuttering and curing complete 1:3:6 ( 1 cement : 3 coarse sand : 6 stone aggregate 20mm nominal size complete work |
| 15 | WALL PLASTER - EXTERIORCEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 16 | WALL PLASTER - INTERIORCEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 17 | 6mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 18 | Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete |
| 19 | EXTERIOR FINISHINGFinishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 20 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer |
| 21 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. Complete.50mm thick with 20 mm nominal size stone aggregate. |
| 22 | VITRIFIED FLOOR TILESProviding and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete11.52.2 Size of tile 600x600 mm |
| 23 | VITRIFIED WALL TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 11.52.2 Size of tile 600x600 mm |
| 24 | LAMINATED FLOORINGProviding and fixing Interlock Laminate (AC-3) on floors including necessary fittings and accessories.All Job Complete |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Second class kail wood |
| 26 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second Class kail wood |
| 27 | 12 mm thick plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-I, IS: 3087 marked,bonded with BWP type synthetic resin adhesive as per IS: 848: |
| 28 | Providing and fixing of wooden moulded beading to doors and windows frames of size 18x5mm iron screws plugs and priming coat on unexposed surface etc compmete job : 2nd class teak wood |
| 29 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 30 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992with necessary screws etc. complete : |
| 31 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete. |
| 32 | Applying priming coat:13.58.1 With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 34 | Stainless steel kitchen sink - with drain board 510 x 1040 mm bowl depth 250 mm |
| 35 | Providing and Fixing Brass Kitchen Sink Mixer with Sewel Spout of approved quality & make as approved by Engineer in charge. |
| 36 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 37 | Providing and fixing CP Brass 32mm size Bottle Trap of approvedquality & make and as per the direction of Engineer-in-charge. |
| 38 | Providing and fixing white viterous china pedestal type water closet (European type) with with seat and lid, 10 litre low levelCP flush with fittings CI/MS bracket 40mm bend diameter flush bend overflow arrangement with mosquito type coupling complete incl. painting of fittings and brackets, cutting and making good the wall and floors wherever req. WC pan with ISI marked white solid plastic seat and lid. with white viterous china flushing cistern & CP flush bend. |
| 39 | Providing and fixing C.P. brass angle valve with wall flange of approved quality conforming to IS: 8931complete as per approved specifications |
| 40 | Providing & Fixing Brass Shower Arm 12 \" long & 6\" Diameter Brass Rain Shower of approved quality & make as approved by Engineer in charge. |
| 41 | 110x110x110x110 mm UPVC double equal door Tee |
| 42 | UPVC bend 87.5° 110 mm bend |
| 43 | UPVC coupler for UPVC drainage pipes 110 mm |
| 44 | Providing/Fixing of 1000 LtsCapacity Pvc Water Tanks (Triple Layer) of Isi Mark/Iso 9001 |
| 45 | uPVC pipes (working pressure 4 kg / cm2 ) Single socketed pipe metre 75 mm dia |
| 46 | Providing/Fixing of 1000 LtsCapacity Pvc Water Tank(Triple Layer) of ISI Mark/Iso 9001 |
| 47 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.External work including trenching, refilling etc. PN-16 pipe , 32mm OD(SDR-7.4) |
| 48 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineerincharge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. PN-16 pipe , 25mm OD(SDR-7.4) |
| 49 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, withmodular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable etc. as required.. Group B |
| 50 | Wiring for light/power plug with 2X4 sqmm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No 4sqmm FRLS PVC insulated copper conductor single core cable for loop earthing as required |
| 51 | Wiring for circuit /submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit as required |
| 52 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3pin 5/6 amps & 15/16 amps modular switch connection etc as required |
| 53 | Supply, installation and testing and commissioning of the following light fixtures including all accessories like electronic ballasts, bulbs, lamp etc complete as required as 1X18 watt surface mounted mirror LED fixtures as required including 18 watt lamp |
| 54 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.: Single Pole |
| 55 | Triple Pole & Neutral |
| 56 | Conduit 25 mm |
| 57 | 25 mm Bend |
| 58 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 Way Double door |
| 59 | Carriage of material cement and steel by MT from source to site of work including loading, unloading complete job on average of 30km |
| 60 | Carriage of materails By Mech.Transport, from source to site of work sand and aggregate To site for an avg lead of 20 km |
| 61 | Carriage of materails By Mech.Transport, from source to site of work stones etc To site for an avg lead of 15 km |
AI Tender Summary
Tender Timeline
Oct 03, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender