Provision Of Path External Water And Ecectric Supply To Security Posts At Leimakhong Mil Stn
Tender Value
1.21 Crore
Estimated cost
Bid Submission
18 Oct 2022
0 days left
EMD
1.96 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leimakhong → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Provision Of Path External Water And Ecectric Supply To Security Posts At Leimakhong Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.. |
| 2 | Excavating over areas, n exc 1.5 m deep and getting out soft/loose soil complete all as specified and directed. |
| 3 | Excavating over areas, exc 1.5mand n.exc 3m deep and getting out in soft/loose soil complete all as specified and directed.. |
| 4 | Material and Labour for PCC 1:3:6Type C2 using 40mm graded aggregate in foundations, filling and mass concrete complete all as specified and directed.. . |
| 5 | Material and Labour for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and directed.. |
| 6 | Material and Labour for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses (Hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc. 20mm) Granite or trap stone complete all as specified and directed. |
| 7 | Material and Labour for raised pointing to random or polygonal rubble uncoursed or brought upto courses in Cement mortar 1.4 complete all as specified and directed. |
| 8 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.. . |
| 9 | Material and Labour for boulder filling dry, handpacked tightly, as in wire crate apron bunds complete all as specified and directed.. . |
| 10 | Material and Labour for providing cement concrete 1:3:6 Type C1 using 20mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 11 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soils complete all as specified and as directed. |
| 12 | Materials and labour for half brick thick brick work with sub class \"B\" bricks straight or curved on plan to any radius built in cement mortar(1:4) complete all as specified andas directed. |
| 13 | M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brickwork or concrete surfaces of wall finished even and fair without using extra cement including preparation of new plasteredsurfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 14 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 15 | Removing excavated material exc 50m and n.exc 250m and depositing where directed at a level n.exc 1.50 m above the starting point of any type of soil complete all as specified and directed |
| 16 | Material and Labour soling (or sub base) with broken boulders or quarried stone, interstices filled surface formed and rolled and consolidated to required gradient and camber spreading thick ness 100 mm complete all as specified and directed |
| 17 | Material and Labour for PCC 1:4:8 Type D2 40mm graded aggregate 100mm thick as insub base for flooring complete all as specified and directed. |
| 18 | Material and Labour for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded any shape and size and colour confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and no pigment complete all as specified and directed. |
| 19 | Material and Labour for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 20 | Material and Labour for RCC 1:2:4 type B1 (20mm graded aggregate Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 21 | Material and Labour for mild steel TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 22 | Material and Labour for roling of broken boulder or quarried stone, not exc 15 cm thickness, Power roller Exc 8 tonne & n exc 12 tonne complete all as specified and directed |
| 23 | Supply, laying and testing 20mm dia GI tubing medium grade ISI marked with all fittings laid in trenches for bore of pipecomplete all as specified and directed. |
| 24 | Supply, laying and testing 25mm dia GI tubing medium grade ISI marked with all fittings laid in trenches for bore of pipecomplete all as specified and directed. |
| 25 | Supply, laying and testing 40mm dia GI tubing medium grade ISI marked with all fittings laid in trenches for bore of pipe complete all as specified and directed. |
| 26 | Supply, laying and testing 50mm dia GI tubing medium grade ISI marked with all fittings laid in trenches for bore of pipe complete all as specified and directed. |
| 27 | Supply and fixing gun metal gate valve 20mm dia with iron wheel head screwed both ends for iron pipe and fixed, bore of pipe complete all as specified and directed. |
| 28 | Supply and fixing gun metal gate valve 25mm dia with iron wheel head screwed both ends for iron pipe and fixed, bore of pipe complete all as specified and directed. |
| 29 | Supply and fixing gun metal gate valve 50mm dia with iron wheel head screwed both ends for iron pipe and fixed, bore of pipe complete all as specified and directed. |
| 30 | Material and Labour for Drilling and tapping cast iron/ ductile iron water mains (in position) for branch connection of the internal dia 20mm complete all as specified and directed. |
| 31 | Supply, install, fixing, commissioning andtesting of 15HP TEFC mounted centrifugal type split casing pump set with CI casing, bronze impellers, C-45 soft with pumping cap 486 to 294LPM at 52 m to 76 mtr head, coupler with and incl energy efficiency -2 induction motor of suitable capacity and confirming to IS-12615, 415 volt, 3 phase 3000 RPM 50Hz, AC supply and suitable for drinking water incl suitable size factory mild steel base frame fixed on foundation as per manufacture\"s recommendation with nuts and bolts incl anti vibration pads complete all as specified and directed. |
| 32 | Supply and spread sand in trenches as sand cushioning to underground cable for protection with dry fine river sand and provide required cover after punning down 18CM will be measured and paid complete all as specified and directed.(Note: Thickness of sand cushion after punning down will be measured and paid.) |
| 33 | Supply and laying wellburntsub class‘B’ bricks( designated 75) locally available best quality, laid dryin trenches forprotection of underground cable all as specified and directed |
| 34 | Supply, laying, Jointing connecting of LTUG cable XLPEinsulated,PVC bedded galvanised steel strip or wirearmoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laid in trenches/ on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed. |
| 35 | Supply, laying, Jointing connecting of LTUG cable XLPEinsulated,PVC bedded galvanised steel strip or wirearmoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 core laid in trenches/ on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed. (Note :-Earth work shall be Measured and paid separtely in relevent item) |
| 36 | All as per serial item No. 35 above but for 25 Sqmm 3.5 Core. |
| 37 | All as per serial item No. 35 above but for 35 Sqmm 3.5 Core. |
| 38 | Supply and fixingin replacement Service wire connection incl GI wire one twin core 10 sq mm, 2 core 1100 volts grde heavy duty flat cable multi stranded with aluminium conductor PVC insulated served with inner sheathing of PVC tape suspended by insulating hangers not more than one mtr apart incl 4 mm dia GI suspension wire incl removing the existing unsv one. Complete all as specified and directed. |
| 39 | Material and labour for cuttingof road/ hard standingn exc 20cm widthandn exc 60cm in depth for laying ofcable protection pipe including making good the disturbed road/hard standing by providing PCC (1:2:4) type B1to match with existing surfacecomplete all as directed. |
| 40 | Supply and laying GI tube 40 mm bore light grade as in cable protection pipe incl all fittings complete all as specified & directed. |
| 41 | Material and labour as in repair earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.25 metre below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt, earth electrode GI strip 25 x 4 mm dia connected to GI earth plate electrode by means of bolts, nuts, check nuts and washers of galvanizediron and thimbles and other end of earth wire connected to main switch board and protected by galvanized iron light grade 40mm bore and GI pipe 20mm bore medium grade with funnel and wire mesh for watering including necessary excavation and earth works. concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) and all as shown in Electrical Plate No. 3 of SSR (Part-1)of 2009. all as specified.(Note:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. |
| 42 | Supply and fixing fabricated sheet metal enclosure of suitable size made out of 3.15 mm thick CRCA sheetsuitable for star delta starter including necessary accessories complete all as specified and directed. |
| 43 | Supply and fixing fully automatic star delta starter able to work in 415 volt, 50 Hz with the suitable relay including heavy duty power contactors, electronic timer, connecting copper wires / leads with lugs, push button with self locking arrangement, voltmeter 0-500 V and ammeter 0-100 A completely covered in metal clad enclosure complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Oct 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 18, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 25, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender