|
| 1 | Dismantling of brick tiles or terracing tiles single layers as on roof including any treatment complete all as specified and as directed |
| 2 | Demolition of Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) including removing of debris out side MoD land complete all as specified and as directed |
| 3 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specially provided for including removing of debris out side MoD land complete all as specified and directed |
| 4 | M&L 50 mm thick Plain cement concrete 1:2:4 Type B0 (12.50mm graded aggregate) as in flooring/Padding surfaces finished even and fair complete all as specified and directed. |
| 5 | M&L for providing Screed bed or bedding layer of mortar 15 mm thick (using water proofing compound) for laying floor finishes in CM 1:4 screed bed under floor finishes complete all as directed.Note : Water proofing compound to be paid seperately. |
| 6 | M&L Providing & laying 3mm thick APP (Atactic polypropylene polymer) modified prefabricated five layer, weight not less than 3.60 Kg/sqm water proofing membrane, black finished, reinforced with non-woven polyster matt make as approved, consisting of a coat of bitumen primer @ 0.40 Ltr/Sqm by the same membrane manufacture, of density 0.87 to 0.89 Kg/ltr at 25 degree C temperature and viscosity 70-160 cps. Over the primer coat, the layer membrane shall be laid using butane torch and sealing all joints etc after preparing the surface complete as per standard practise as per manufacturer`s instructions including complete removal of old membrane/treatment. The vital physical and chemical parameters of the membrane shall be as under :-Note:-(1). Joints strength in longitudinal and transverse direction at 23 degree C as 650 /450N/5 Cms.(2) Tear strength in longitudinal and transverse direction as 300/250/5 Cms. Softening point of membrane not less than 150 Degree C. Cold flexibility upto 20 degree C when tested in accordance with ASTM (D-5147).(3) The Laying of membrane shall be got done through the authorized applicator of manufacturer of membrane only. |
| 7 | M&L for Cement concrete tiles 25cm x 25cm x 22mm thick, m a c h i n e pressed; set jointed and pointed in neat cement slurry in floor/roof and cut and polished with Grey cement and no pigment over 15mm thickCM 1:6all as specified and directed. |
| 8 | Supply only Integral water proofing compound of approved make all as specified and directed. |
| 9 | M&L for 15 mm thick rendering in CM 1:4 over concrete surfaces mixed with water proofing compound @ 3% by weight of cement complete all as specified. Note: Water Proofing compound shall be measured and paid for seprately. |
| 10 | M&L PCC 1:7:12 in sunken floor\"s filling in mass concrete type F2 , using 40mm graded aggregate complete all as specified and directed. |
| 11 | M&L 75mm thick Plain cement concrete 1:4:8type D-2 using 40mm graded crushed stone aggregate) as in sub base under floor/path all as specified and directed. |
| 12 | M&L 25 mm thick Plain cement concrete 1:2:4 Type B0 (12.5mm graded aggregate) as in flooring, surfaces finished even and fair complete all as specified and directed. |
| 13 | M&L 50mm thick PCC (1:3:6) typeC-1 (using 20mm graded crushed stone aggregate) as in plinth protection, surfaces finished even and fair, complete all as specified and directed. |
| 14 | Providing, cement concrete PCC 1:2:4 type B-1 (using 20mm graded aggregate) in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 15 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed |
| 16 | M&L Providing precast cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs,mangers, shelves and similar articles with plain faces B-1, 1:2:4 (using 20mmgraded crushed stone aggregate) in CM 1:4 complete all as specifiedand directed |
| 17 | Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 18 | Demolition of stone slabs and tiles of any description or thickness in floors,aprons etc laid ,bedded and pointed in any mortar. |
| 19 | S&F 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in 15mm thickcement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 20 | M&L for Mirror polished machine cut kota stone slab 600mm x 600mm x 20 to 25 mm thick in flooring over and including 20mm thick cement screed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 21 | M&L for Mirror polished machine cut kota stone slab 600mm x 100mm 20 to 25 mm thick in riser of steps, skirting/ shelves etc. round edgesover and including 15 mm thick screed bed or bedding layer in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 22 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar works complete all as specified |
| 23 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 24 | Non - skid Coloured Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. |
| 25 | M&L Glazed ceramiccoloured tiles 350x 250x 7 / 450X 350X 7mm thick, as in vertical surfaces such as in skirting and dado etc.,set and jointed in neat cement slurry andpointed in white or colouredcement to match the colour of tiles laid over and including 10mm thick back coat in CM (1:4),complete all as specified and directed. |
| 26 | Taking up or down steel water tubings and connections of 15mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed. |
| 27 | Taking up or down steel water tubings and connections of 20mm bore pipe including cleaning or re-fixing or removal to store , complete all as specified and directed. |
| 28 | Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) , complete all as specified and directed. |
| 29 | Refixing 20mm old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) , complete all as specified and directed. |
| 30 | M&L 15mm Tubes, medium grade\" galvanised, with all GI fitting and fixed complete to walls and ceilings or laid in floors |
| 31 | M&L 20 mm Tubes, medium grade\" galvanised, with all GI fitting and fixed complete to walls and ceilings or laid in floors |
| 32 | S&F in repairs 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe , all as specified and directed. |
| 33 | S&F in repairs 15mm bore Bib taps, cast copper alloy chromium plated fancy type (ISI marked) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed. |
| 34 | S&Fin repairs 15mm bore stop valve/Angle Cock, chromium plated fancy type cast copper alloy, screwed down high pressure, with crutch or butter fly handle, screwed both ends for iron pipes or for unions and fixed of,complete all as specified and directed. |
| 35 | S&F in repairs15mm bore Pillar taps bore cast copper alloy, with capstan heads,chromium plated fancy type, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts,screwed for iron pipe, |
| 36 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 600mm,completeall as specified and directed. |
| 37 | S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (Cylinderical vertical with closed top) and fixed in position, all as specified in SSR Part-I, including dismantling of old watertank of any description, complete all as specified and directed. |
| 38 | S&F 20mm dia brass float valves , high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed. |
| 39 | S&F in repairs Soap dishCP fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, all as specified and directed. |
| 40 | S&F in repairs 125mm Chromium plated shower roses with or without swivel joints,including fixing to steel pipe or union complete all as specified |
| 41 | S&F in repairs Tubular towel rail, brass chromium plated 20mm diaD type, 60cm long between flanges, complete all as specified and directed. |
| 42 | S&F Brass chromium platedpeg stay set of 6 hooks complete all as specified |
| 43 | S&F in repairs 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on PVC moulding and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified. |
| 44 | S&F in repairs Vitreous China squatting pan of \"Orissa\" pattern of size 580 x 440mm, white, with integral foot rests, complete including provision of lime concrete bedding all as directed. |
| 45 | Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc.complete all as specified and directed. |
| 46 | S&F in repairs Vitreous China wash Basin (flat back or angle back type/oval type) , of size 550x400mm including brackets, waste coupling PTMT,and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified. |
| 47 | S&F in repairs Vitreous china half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe discharge pipe of PVC 40mm dia and 40mm Waste coupling of PTMT(half or full threaded)complete all as specified and directed. |
| 48 | S&F in repairs PVC waste pipe 32/40 mm bore all as specified |
| 49 | S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed. |
| 50 | S&F in repairs Grating doom 100mm dia of PTMT (Minimum weight 25gms) all as specified and directed. |
| 51 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth on Brick wall complete all as specified |
| 52 | S&F in repairs salt glazed stoneware gully traps, 150x150mm square or round mouthed, type P complete all as specified. |
| 53 | Dismantling of cast iron or reinforced concrete drain pipes , 75mm/100mm internal dia, jointed in cement mortarlaid in trenches or fixed to walls incl all fittings complete all as specified. |
| 54 | S&F PVC (SWR) pipe 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall, complete all as specified and directed. |
| 55 | S&F PVC (SWR) pipe 75 mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to wall,complete all as specified and directed. |
| 56 | S&F 110mm bore PVC (SWR) bends with/without door access any radius,complete all as specified and directed. |
| 57 | S&F 75mm bore PVC (SWR) bendswith/without door access any radius,complete all as specified and directed. |
| 58 | S&F 75mm borePVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 59 | S&F 110mm borePVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed. |
| 60 | S&F 110 mm bore PVC (SWR) branch piece ,double (double Y) equal or unequal, with access doorcomplete all as specified and directed. |
| 61 | S&F 110/110 mm bore PVC (SWR) \"P’ trap all as specified and directed. |
| 62 | Taking down chowkats or frames not exc 1.5Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 63 | Taking down chowkats or frames exc 1.5Sqm and not exc. 4Sqm each with shutters (without taking off shutters from the frames),complete all as specified and directed. |
| 64 | M&L Cutting holes in brick walls exc half brick but n.exc one brick in cement mortaror cement lime mortar and stone walls forinserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required. |
| 65 | Taking down shutters of any descriptionexc 1Sqm and not exc. 2 Sqm each, completeall as specified and directed. |
| 66 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification |
| 67 | S&F factory made solid panel PVC Door shutter 28mm thick (stiles)consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain cover PVC \"C\" channel having PVC strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails on either side & as gap insert for top rail & bottom rails, panelling of plain colour PVC sheet to be the fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site as per specification and drawing. |
| 68 | S&F Pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast(06 Nos) etc., complete, as specified, supplied and fixed completeall as specified and directed. |
| 69 | Supply and fix35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 70 | Supply and fix2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed. |
| 71 | S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete with glazing bars , dovetailed or weldedas per Drg No TD-277R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed. |
| 72 | S&F factory made box type steel windows / ventilators with side hung shutters including hinges, steel handle, steel peg stay and MS tower bolt 150mm long complete without glazing bars , dovetailed or weldedas per drawing No TD-276R sheet 1/4 to 4/4 of HQ CE CZ Chandigarh complete all as specified and directed. Note for item No 71 & 72 :- Glass / wire gauge shall be measured and paid separately. |
| 73 | S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar workon- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 74 | S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 75 | S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed |
| 76 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new onescompleteall as specified and directed by Engr-In-Charge. |
| 77 | S&F 4mm thick Sheet glass ordinary quality, glazingwith oil putty or wooden beadsin squares n.exc 0.50 Sqmin each pane, complete all as specified and as directed. |
| 78 | S&F 4mm thick Figured glass pin head type, glazingwith oil putty or wooden beadsin squares not exceeding0.50 Sqm fixed to wdn frame in each pane, complete all as specified and as directed. |
| 79 | S&F 300 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 80 | S&F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed. |
| 81 | S&F 300 mm longAluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 82 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 complete all as specified and directed. |
| 83 | S&F 150mm long Aluminium handles, cast type, anodised, all as specified and directed. |
| 84 | Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed. |
| 85 | M&L for Brickwork with subclass ‘B’bricks , class designation 10 straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified and directed |
| 86 | M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed |
| 87 | Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including rakingout joints, hacking for key, scrubbing down with water, etc complete as specified and directed |
| 88 | M&L Rendering 5mm thick on ceiling, in cement mortar 1:3 finishedthe surface even and smooth without using extra cement , complete, all as specified |
| 89 | M&L Rendering 10mm thick on fair faces of brick work or concrete surface, in cement mortar 1:6 finishedthe surface even and smooth without using extra cement , complete, all as specified |
| 90 | M&L Rendering 15mm thick on other than fair faces of brick work or stone masonry surfaces in cement mortar 1:6 finishedthe surface even and smooth without using extra cement , complete all as specified. |
| 91 | M&L repairing the edges of concrete chajjas, facias, slabs, columns and the like by providing PCC (1:2:4) type B0 incl all necessary form work and or provn of rendering 15mm th(average thickness) in cement mortar 1:3 , after applying a coat of cement slurry @ 3 kg/sqm of surface, finished even and fair, surface area not exc 300 mm wide in patches incl taking down swoolen/damaged plaster of concrete complete all as specified |
| 92 | M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified. |
| 93 | M&L Complete removal of existing treatment of ceiling and applying three coats of white wash, including cleaning the floor / joinery, surfaces, glass panes complete all as specified. |
| 94 | M&L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper and one coat of wall care puttyover a coat of chalk whitening primer ncluding cleaning the floor / joinery, surfaces, glass panes complete all as specified. |
| 95 | M&L Complete removal of existing treatment of wall and applying two coats of oil bound distermper, white or colour and a coat of wall care putty (avg 2mm)over a coat of chalk whitening primer , including cleaning the floor / joinery, surfaces, glass panes complete all as specified. |
| 96 | M&L for preparation of newly plastered surface of walls and applying two coats of weather proof exterior emulsion paint overa coat of wall care putty (avg 2mm) complete all as specified.over a coat of alkali resistant primer |
| 97 | M&L Complete removal of existing treatment of wall and applying two coats of weather proof exterior emulsion paint, overa coat of wall care putty( avg 2mm) complete all as specified. over a coat of alkali resistant primer, including cleaning the floor / joinery, surfaces, glass panes complete all as specified. |
| 98 | M&L for preparation of old painted surfaces of steel over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified. |
| 99 | M&Lfor preparation of new steel surfaces of any descriptionover 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 100 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed. |
| 101 | M&L Preparation old wooden surface and applying one coat of synthetic enamel paint , any description over 10 cm in width or girth not otherwise described complete all as specified and directed. |
| 102 | Re-Writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high |
| 103 | Excavating in trenches, n exc 1.5m wide & n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan & getting out in soft/loose soil complete all as specified |
| 104 | Returning, filling in, including spreading, levelling, watering & well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified. |
| 105 | Removing excavated material distance exc. 250 m but n exc. 500 m and depositing where directed at a level n exc. 1.5 m above the starting point in soft/loose soil complete all as specified. |
| 106 | M&L Hardcore of Broken stone/boulders gauge n exc. 63mm, deposited, spread & levelled in layers n exc. 15 cm thick, watered & rammed to a true surface complete all as specified. |
| 107 | M&L PCC in foundations, filling and mass-concrete type D2 (1:4:8) using 40 mm graded stone aggregate complete all as specified. |
| 108 | M&L RCC M-25 design mix using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified. |
| 109 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified. |
| 110 | M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified. |
| 111 | M&L Brickwork with subclass `B\" bricks, class designation 10 straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified. |
| 112 | M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar CM (1:3) over RCC surfaces as on ceiling complete all as specified. |
| 113 | S&F Galvanised mild steel wire cloth, 0.56 nominal dia of wire & average width of aperture 1.18mm with tinned tacks, or galvanised wire staples complete all as specified. |
| 114 | S&F Sheet glass 3.0mm thick, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane M&L for rendering 15mm thick on brick work or concrete surfaces in cement mortar complete all as specified and directed. |
| 115 | S&F in repairs drapery rods (fancy type) 20/25mm in dia with end MS powder coated brackets & funnels fixed with rawl plug and screws, complete all as specified and as directed. |
| 116 | M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as inplinth protections complete all as specified. |
| 117 | S&F in repair vitreous china wash down water closet pan (pedastal pattern) white (exclusing fixing bolts, flushing cistern and flush pipe), complete all as specified and as directed. |
| 118 | S&F Vitreous China wash Basin (flat back or angle back type/oval type) , of size 550x400mm including brackets, waste coupling PTMT,and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, complete all as specified. |
| 119 | Supply & fix PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc.complete all as specified and directed. |
| 120 | S&F 15mm dia bib tap, chroumim plated brass, fancy type with crutch or butterfly handle, screwed down complete all as specified and directed. |
| 121 | S&F 15mm dia pillar tap, chromium plated brass, fancy type with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 122 | S&F 15mm bore CP angle cock/stop valves fancy type, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 123 | S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 124 | S&F rotational moulded polyethylene (tripple layer) water storage tanks 500ltr capacity (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I, complete all as specified and directed. |
| 125 | S&F20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified. |
| 126 | S&F for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. |
| 127 | M&L for two coats cement base painton newly plastered, undecoratedsurfaces ofwalls including preparation of new plastered surfacescomplete all as specified. |
| 128 | S&F Chromium plated Jet Spray fixed in position as specified and directed. |
| 129 | S&F glass shelffixed in wall in position as specified and directed. |
| 130 | S&F for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, all as specified and directed. |
| 131 | S&F factory made prepolished precast cement concrete M-30, vibro compacted chequered tile 25mm thick in required size, shape & colour set jointed and pointed in neat cement sullry with grey cement and pigment over and including 20mm screed bed in CM 1:4 complete all as specified and as directed. |
| 132 | S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all as specified. |
| 133 | S&F for jet PVC suitable for 15 mm dia pipe with 1.25 metre long flexible tubeincluding making connections and fixed in position complete in all as specified. |
| 134 | M&L for providing and fixingGypsum board panel laminated with texture vinyl coated paper tiles of size 595mmx595mmx12mm thick as in ceilinghaving snap grid 600mmx600mm including GI wall angle of size 24mmx24mmx0.43mm thick along with perimeter of ceiling, fixed to walls/ partition with the help of nylon sleeves at 450mm centre to centre, suspending intermediate Tee section of size 24mmx38mmx0.35mm thick and cross Tee-section 24mmx25mmx0.3mm thick suspended from soffit of ceiling at up to 900 mm centre to centre or adjustable as required at site.4mmdiaGI wirehangers fixed/tightened with ceiling with the help of nylon sleeve/rawl plugs complete all fittings complete all as specified and directed |
| 135 | S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified. |
| 136 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 137 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 138 | S&F solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all specified. |
| 139 | S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete fittings all as speciied. |
| 140 | Taking down carefully copper/aluminium point wiring (light, fan, socket, bell or power) completeincluding all electrical fittings & fixtures and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed. |
| 141 | Taking down carefully old unsvcopper/aluminium sub main wiring iny size any description and making good disturbed surfaces of wall , floor etc and matching wth original colour of wall, complete, all as specified & directed. |
| 142 | Taking down carefully old unsv MCD DBs ay type and description incl MCBs and depositing into MES store yardfor ruse or issue unde sch of creditcomplete |
| 143 | M&L Point wiring with 1.5 sq mmcopper conductor FRLS(multistrand) PVC insulatedISI marked unseathed cable in and including concealed , non metalic rigid pvc medium grade ISI marked conduit not less than 19 mm with all fittings& other accessories and also includingPVC insulated ISI marked unseathed FRLS cable of size 1.5 sq mm copper conductor as earth wire to common earth dolly including concealed in wall/ceiling,modular MS Box, 1.6mm thick with modular cover plate with frame as required at site suitable for modular switches, sockets, fan regulatoretc for One light point controlled by one way switch 6 amps 240 volts.Note:-1.Colour code of wiring should be (for phase -Red, Neutral-black & earth wire green)2. Modular switch sockets fan regulators shall be meaured and paid separately uner respective items.3. Cost of mudular MS box , codular cover platean frame of any modules as required at site and as directed by Engineer-in-charge is deemed to be included in th quoted rates. |
| 144 | All as per item No. 143 above but for Oneceiling fan/exhaust fanpoint controlled by one way switch 6 amps 240 volts |
| 145 | All as per item No. 143 above but one 3 pin 6 Amps switch socket out let point on independent board |
| 146 | All as per item No. 143 above but one 3 pin 6 Amps switch socket out let point on same board |
| 147 | All as per item No. 143 above but with 2.5 Sqmm single core, PVC insulated unsheathed, FRLS cable, 1100 volts grade, for one switch socket outlet 16 Amps on independent board. |
| 148 | S&F modular one way switch 6 Amp 240 volt suitable for one model etc complete as specified and directed. |
| 149 | S&F modular socket shutter suitable for 6 Amp 2/3 pin combined 240 volts complete as per specified and directed |
| 150 | S&F modular switches suitable for 16 Amp 240 volts complete as specified and directed |
| 151 | S&F modular socket shutter suitable for 16 Amp 2/3 pin combined 240 volts complete as specified and directed. |
| 152 | M&L for ceiling rose with three terminal as per relevant IS complete as specified and directedMake SSK/cona/leader |
| 153 | S&F lamp holder pvc/polycarbonate type with back plate suitable for batten fitting incl LED lamp of 10 watt etc complete as specified and directedMake Havells Model No AHLHGMWOOO or equiavlent Legrand/Havells |
| 154 | S&F in repair decorative box type fitting with blue colour end cap for LED tube 16/18 watt luminaire for 230 volt AC incl LED tube 16 watt complete all as specified & approved by EIC.Make:- CG cat part No.DMLN1LT8-16 or equivalent of/Plilips/C&S/Wipro |
| 155 | Supply and fixdecorative box typeLEDINVERTERbatten housing with inbuilt Li-inn battery with 03 hrs back up time, with and including 20 wats LED,Cool white (System lumenefficiency not less than 100 lm/wattsand lumen output at battery not less than 60 lm/watt ), CRI more than 80,operating voltage 230 V AC 50 HZ , opeating temperature (-10° C to +50°C), glarefree, 0 UV radiation all as specified and directed. |
| 156 | S&F mirror light sleek LED mirror light provided with high output diffuser with suitable capacity driver with all comptonants as per manufacturer with 3 core flexible cord from ceiling rose to connector of fitting etc complete as specified and directed Make Crompton Cat part No LCL-10-CDL or equivalent C&S/Wipro/Philips |
| 157 | M&Lfor sub main wiring with two single core, PVC insulated,ISI marked, unsheathed, 1100 volts grade multistranded copper conductor cable drawn into and including suitable size non metalic rigid pvc concealedconduit (ISI marked) concealed/surface with all accessories and including one single core pvc insulated multistranded unsheathed 1100 volts grade copper conductor cable as earth wire of the size 2x6.0 sqmm + 1x4 sqmm earth wireas in repair incl cutting and chasing and making good thw disturbed surface to match the existingcomplete all as directed & specified. |
| 158 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door)8 way SPN suitable for MCB DB\"s 240 Voltswith 200 Amps rated busbar, neutral & earthing link bar, flush/surface mounting as in repair complete all as specified anddirected. |
| 159 | S&F MCBsingle pole ISI marked ISI Marked `B\" series working on 240 Volts 50 HZ AC supply for incomming and out goingcontrolling cercuit of capacity 32 Amp breaking capacity 10 KA as in repair etc all as specified and directed. |
| 160 | S&F MCBsingle pole and neutral ISI marked `B\" seriesworking on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40 Amps 10 KA breaking capacityas in repairetc all as specified and directed. |
| 161 | M&L for in repair earthing in repair complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground (earth pit not less than 2.25 metre deep below ground level) vertically, with top edge of the plate not less than 1.50 mtr below normal ground level, connected to galvanized iron wire 4mm dia by means of nuts, bolts, washers of GI steel all as shown on electrical plate No 3 of MES Schedule Part I connected to earthing test point and testing on completion with and including necessary excavation and earth work, earth electrode, earthing lead from electrode to equipment/substation, adequate quantity of charcoal dust and common salt, test point, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4)type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover, reinforced with 6mm dia bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe 15 mm dia with funnel and wire mesh,and 15 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. |
| 162 | Supply and laying or fixing or passing through pipe, 1100voltsgrade heavy dutycablewith PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tapeandoverall PVC sheathed3.5 core35 sq.mm nominal cross section in service connections |
| 163 | Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width incl cutting of road/path and getting out soil including forming bottom surface to required slope/gradient forlaying cables/pipes etc.all as specified and directed by Engineer-in-Charge including removing cable protection PCC covers/ bricks & stacking serviceable covers / bricks for reuse and disposal of unserviceable covers within 50 m all as directed.Note : (i) Excavation shall be made carefully in order to avoid damage of existing cables and protection covers.(ii) The excavation work may be carried out in short lengths for locating fault in under ground cables at different locations. |
| 164 | Removal of surplus excavated spoil (Soils) not exceeding 50 Mtr distanceand depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 165 | Material & labour for sand filling with clean dry find sand unwashed including gently punning around cables in trenches/ducts for cable protection complete all as specified and directed by Engineer-in-Charge. |
| 166 | Supply and laying of classB bricks for under ground cable protection as directed by Engineer- in - charge |
| 167 | M&L cement concrete 1:4:8 Type D-2, (40 mm graded stone aggregate0 as in repair of road/path cutting complete all as specified and directed by Engineer-in-Charge. |
| 168 | Tubes, \"light grade\" galvanised, 40 mm dia with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge. |
| 169 | Supply and fix ofswitch piano 5 Amps single pole, AC, 230V flush type ISI marked. |
| 170 | S & F Swich Socket outletmulti purpose 3 pin,16 amp and one pin6 amp controlled by one switch. |
| 171 | S&F for Batten forLED tube light 1 x 18 watts LED, 230 volts energy efficient , industrial batton type, powder coated, CRC Sheetcomplete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size Complete all as specified and as directed by Engineer-in-Charge. |
| 172 | Supply and fix exhaust Fan 300mm sweep (5 Star BEE rating), 900 RPM, single phase, 230 Volts heavy duty with louvers, shutter including three core flexible cable of required length of size 23/0.0076 from ceiling rose/connector to fan terminal, making opening in the wall as required, fixing the fan with suitable size of nut, bolt washer and making good the disturbed surfaces as per existing complete all as specified and directed. |
| 173 | S&F of sub main wiring with two single core 4 sqmm and one single core2.5 sqmm as earth continuity cable PVC insulated multi-straned copper conductor drawn through inexistingsurface/concealed conduit of any dia and connection at both ends with copper legs, colour code for phase Red /Yellow/Blur for neutral Black and for earth green, complete all as specified |
| 174 | Supply & Fix of factory made sheet metal enclosure for distribution boarddouble door type (Fixed to the wall), single pole and netural with 200 Amp rated bus bar, 4 way suitable for having MCB’s complete all as specified. |
| 175 | Material and labour for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm buried directly in ground vertically to a depth not less than 4.5 meter below normal ground level (with top edge of earth plate not less than 3.75 meter below ground level) connected to GI strip 32 x 6mm main earthing lead by means of galvanized bolts, nuts and washers with connected to earth test point & to main switch board /paneletc. all as specified and testing on completion with and including necessary excavation and earth work in any type of soil, earth electrode, earthing lead from electrode to equipment/substation/panel etc, adequate quantity of charcoal dust and common salt, test point terminal block made out of phoshper bronzein sheet steel box, PCC (1:3:6) type C-1 (using 20mm graded black trap/granite/Basalt stone aggregate) for earth pit with 40 x 40 x 6mm mild steel angle iron frame for cover, pre cast RCC (1:2:4)type B-1 (using 20mm graded black trap/granite/Basalt stone aggregate) 40mm thick cover reinforced with 8mm dia TMT bars 3 Nos both way with 12mm dia round bar handle, GI light grade watering pipe20 mm dia with funnel and wire mesh,and 40 mm dia GI light grade earth lead protection pipe, complete all as specified and directed. |
| 176 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator andccessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ®complete all as specified and directed. |
| 177 | Supply, laying and testing cable XLPE insulated, Screened, PVC bedded, galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sqmm 2 core complete all as specified and directed. |
