Design, Engineering, Development Of Waste To Art Park At Existing Art Park At Bhagwan Mahavir Balvihar Art Park At Campal, Panaji-Goa
Tender Value
8.92 Crore
Estimated cost
Bid Submission
01 Nov 2022
0 days left
EMD
17.85 Lakhs
Bank guarantee accepted
Document Fee
8000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
panaji → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Design, Engineering, Development Of Waste To Art Park At Existing Art Park At Bhagwan Mahavir Balvihar Art Park At Campal, Panaji-Goa
BOQ
| Sl. No. | Item Description |
| 1 | Art Work |
| 2 | Providing miniatures / sculpture/structure of Pyramids of Gisa - The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height - 16 feet. Minimum Width - 25 feet. Minimum length - 25 feet.Foundation Minimum height from ground level- 2 feet Minimum Width - 27 feet Minimum Length - 27 feet. Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 3 | Providing miniatures / sculpture/structure of Leaning tower of Pisa - The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height- 30 feet Minimum Width - 7.5 feet Minimum Length - 7.5 feet. Foundation Minimum Hight from Gound Level- 2 Feet Minimum Width -9.5 feet Minimum Length - 9.5 feet. Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 4 | Providing miniatures / sculpture/structure of Pyramids of Gisa - The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height - 16 feet. Minimum Width - 25 feet. Minimum length - 25 feet.Foundation Minimum height from ground level- 2 feet Minimum Width - 27 feet Minimum Length - 27 feet. Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 5 | Providing miniatures/ sculpture/structure of Colosseum- The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height - 16 feet. Minimum Width - 32 feet. Minimum Length - 45 feet. Foundation minimum from gorund level- 2 feet Minimum Width - 24 feet & Minimum Length - 47 feet. Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC Slab if required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 6 | Providing miniatures/ sculpture/structure of Christ the Redeemer of Rio - The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height- 27 feet. Minimum Width - 7 feet. Minimum Length - 19 feet. Foundation Minimum height from Ground Level- 2 feet Minimum Width - 9 feet Minimum Length - 21 feet.Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 7 | Providing miniatures / sculpture/structure of Statue of Liberty - The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height - 25 feet. Minimum Width - 15 feet. Minimum Length - 15 feet. Foundation Minimum from ground level- 4 feet Minimum Width - 17 feet MinimumLength -17 feet. Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 8 | Providing miniatures / sculpture/structure of Taj Mahal- The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height- 22 feet Width 65 feet Minimum Length - 35 feet. Foundation minimum height from ground level- 2 feet. Minimum Width- 67 feet Minimum Length - 37 feet, Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 9 | Providing Relief Strucutres miniatures / sculpture/ The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height- 17 feet Width 2.5 feet Minimum Length - 28 feet. Foundation minimum height from ground level- 2 feet. Minimum Width- 4 feet Minimum Length - 30 feet Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 10 | Providing Relief Strucutres miniatures / sculpture/ The structure needs to be made with a minimum area, using the scrap/waste material available. Minimum Height- 8 feet Width 3 feet Minimum Length - 3 feet. Foundation minimum height from ground level- 2 feet. Minimum Width- 5 feet Minimum Length - 5 feet Foundation Specs - including Brickwork all around the platform as a base for the platform on which installation shall be placed 4 Inches of PCC (1:3:6-1cement: 2 coarse sand: 4 stone agg. 20mm nominal size)below the concrete slab RCC M-25 including steel (Tata/SAIL/JSW) with Vacuum Dewaterlng External Pavers / Stone Tiles on top of RCC SIab If required. The miniatures/sculpture shall be emboded in cement concrete In the ratio of 1:2:4 (1cement: 2 coarse sand: 4 stone agg. 20mm nominal size) Including excavation and removal of surplus earth. For finishing while installation of miniatures/sculptures Applying primer coats (two or more)of approved quality primer, painting with P.U. Coatingautomotive paint finishing as per direction of work-in-charge, including all labour,maetrial, tools and plants all complete. |
| 11 | Civil Work |
| 12 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in widthor 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directedwithin a lead of 50 m. |
| 13 | a) All kinds of soil |
| 14 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 15 | Supplying of granitic or basaltic stone soling of size 15-20 cm and Murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power roller including spreading waters and consolidation of binding material etc. complete.(Measurements shall be considered on finished item.and and layer of WBM of 50/75mm thick shall be taken seperately over this sub-base to obtain smooth surface, as per the directives of Engineerin-charge). |
| 16 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. |
| 17 | b) Moorum |
| 18 | Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in: |
| 19 | a) All works upto plinth level |
| 20 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
| 21 | Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade |
| 22 | Providing and laying in design & pattern factory made chamfered edge Cement Concrete paver blocks ( C. C. paver blocks) of M35/M40 strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. |
| 23 | c) 60mm thick with Yellow/ Orange/ Earth colour (M35 grade) |
| 24 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer : Flamed finish granite stone slab. |
| 25 | c) Elite Brown |
| 26 | Supplying and fixing Pre-cast cement concrete kerbstones(factory made,the factory should be ISO certified and registered under Dirctorate of Industries, Govt. of India) of M-20 with 20 mm nominal size granitic/basaltic aggregate properly consolidated by mechanical plat-form and vibrators with smooth finish including fixing at site complete as per specification. |
| 27 | a) Size 30 cm L x 50 cm H x 15 cm T |
| 28 | CARRIAGE OF MATEIALS By mechanical transport including loading, unloading and stacking |
| 29 | (5 ) Steel up to 5km |
| 30 | (5 ) Steel up to 10km |
| 31 | (5 ) Steel up to 20km |
| 32 | Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge. |
| 33 | Electrical Work |
| 34 | Supply of4 core unarmoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI markconforming to IS:1554(Part I) IS:7098(Part I) with latest amendments of following size. |
| 35 | a) 4 Core 2.5 sq.mm |
| 36 | b) 4 Core 6 sq.mm |
| 37 | Supply of4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size. |
| 38 | a) 4 Core 70 sq.mm |
| 39 | Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required. |
| 40 | (1) 4 x 1.5/2.5 Sq. mm. |
| 41 | (3) 4 x 6 Sq. mm. |
| 42 | Supplying and making cable end terminations with brass compression gland and aluminium lugs for folowing sizes of 3 1/2 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, completeas required. |
| 43 | a) (4) 3 1/2x 70 Sq. mm. |
| 44 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. |
| 45 | (a) In soily strata |
| 46 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. |
| 47 | (a) In soily strata |
| 48 | Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground in the same trench in one tier horizontal formation including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. |
| 49 | (a) In soily strata |
| 50 | Laying of one number additional PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm direct in ground in the same trench in one tier horizontal formaion including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge,sand cushioning with screened sand bed of 20mm thick , protective covering with bricks placed breadth-wise on top of cable all over the run( the brick protection shall cover the cable and project atleast 5 cms over the sides of the cable) and backfilling the excavated earth without stones or hard material and making the surface proper with 15 cm crown on the top complete as required. |
| 51 | (a) In soily strata |
| 52 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc.complete as required |
| 53 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size exceeding 25 sq.mm but not exceeding 120 sq.mm on surface,etc.complete as required |
| 54 | Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC coverhaving locking /lifting arrangement and watering pipe etc.withcharcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation ofpit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c)Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement(plumbing will be paid seperately). |
| 55 | (a) In soily strata |
| 56 | Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt). |
| 57 | Supplying and laying 25 mmx 5 mm GI strip at 0.5 m below ground as strip earth electrode including soldering etc. as required |
| 58 | Supply , installation testing and commissioning of floor mounted cubical panel board made of 12 SWG Galvanised sheet , double door , ourdoor type with slopping roof, With M.S angle support made of 50 mm X 50mm X 10 mm GI angle of required height . The panel and the stand to be duly painted with PU paint of approved shade and shall have following accessories and provision of external or internal earthing Bus. |
| 59 | Incommer |
| 60 | 1 no 63 amps TP mcb in a sealable meter box compartment to accomaodate 3 phase directly operated energy meter (supply included), 200 amps aluminum bus bars , Voltmeter, ammeter with selector switches and indicators . |
| 61 | 1 no 125 amps 4 pole manual changeover as bypass for D.G. |
| 62 | 1 no 125 amps 4 pole Auto transfer switch |
| 63 | outgoing( 3 sets of following ) |
| 64 | 1 no 40 amps TP mcb |
| 65 | 9 nos 6-20 amps SP mcbs |
| 66 | 3 POLE 32 ampsTP contactor and timer |
| 67 | Space for 1 no contactor3 pole 32 amps and timer , 12 nos SP mcbs, 2 nos TP mcbs , |
| 68 | supply and fixing spare 3 nos.32 amps TP contactors 3 nos timers and 10 nos 6-20 amps SP Mcbs |
| 69 | Supply , installation testing and commissioning of floor mounted cubical panel board made of 12 SWG Galvanised sheet , double door , ourdoor type with slopping roof, With M.S angle support made of 50 mm X 50mm X 10 mm GI angle of required height . The panel and the stand to be duly painted with PU paint of approved shade and shall have following accessories and provision of external earthing Bus. |
| 70 | In commer 1 no 40 amps 4 pole isolatoe |
| 71 | Outgoing 12 nos SP mcbs |
| 72 | Space for 1 no 32 amps TP contactor and 1 nos. timer and 6 nos. 6-20 amps SP Mcbs |
| 73 | Supply ,installation of post top pole made of housing of hot dipped galvaised steel step 3 mts long including supply and making PCC foundation 1:3:6 with foundation bolts embebed as per the drawing as per the manufacture\"rs design with 200 mmX 200mm X 8 mm MS base plate with eleiptical holes as required with suitable length ofM 12 boltsincluding erection of pole upto a height of 3 mts. The erection of pole includingfixing of required fixrture with all mounting arrangements and supply ,fixing of flexible copper wire of size 3 core 2.5 sq mm. Make of pole Havells cat ref LSSLOG0203 or equivalent in, Bajaj, crompton. |
| 74 | Supply and making PCC foundation 1:3:6 with foundation arrangements including erection of facede light fixture LED. The erection of fixture includesfixing of required fixrture with all mounting arrangements as per manufacturer\"s design and supply ,fixing of flexible copper wire of size 3 core 2.5 sq mm |
| 75 | Supply and laying 2.5 sq mm FR copper conductor pvc insulated wire tid with pvc tie |
| 76 | Supply , assemblingand installtion on existing pole of post top LED fixture IP 66 35/40w watts of make Hawells( cat ref RUBYPT25WLED830SSYMTOPC), crompton( cat ref LPTC 40 CDL) or equivalent of Bajaj ,colour temparature 4000 k |
| 77 | Supplyassemblingand installtion on existing foundationIP 66 of floodlight for façadeLED fixturecat refJETA QUANTO PLU MONO 50 w )of make Havells, crompton( cat ref ROVER PRO 50 w 3000 k, ) or equivalent of Bajaj.Colour temparature 3000k |
| 78 | Supplyassemblingand installtion on existing foundation IP 66 of floodlight for façadeLED fixture 15watts of (cat ref FC UD GLASS 24 66 15 W LYCUS SPIKE LIGHT )of make Havells, crompton or equivalent in Bajaj.Colour temparature 3000k |
| 79 | Supply and connecting FRP IP 66 bo of make hensel only ( cat ref DK 0402 G) with 16 amps connectors for incoming and outgoing cable . The box shall be of size 104mmX 104mm X 70 mm with glanding and termination of incoming and outgoing cables. |
| 80 | Engaging electrician and helper for 8 hours duty in case required for emergency visit other than the work included in the comprehensive maintenance. |
| 81 | Supplying and laying with coupling at store or site of work rigd pvc (SEL,FIT) pipes for public water supply including railway freight,carting,loading and unloading,stacking, transit insurance etc complete conforming to IS 4985 -2000 and ISI mark class 6 kg/cm sq. |
| 82 | a) outer dia 63 mm |
| 83 | Horticulture Work |
| 84 | Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment). |
| 85 | Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/andgood earth to be paid separately). |
| 86 | a) Planting Permanent Hedges including Digging of Trenches (Planting permanent hedges including digging of trenches,60 cm wide and 45 cm deep,refilling the excavated earth mixed with farmyard manure,supplied at the rate of 4.65 cum per 100 metres and supplying and planting hedge plants at 30 cm apart) |
| 87 | Supply of Crotton minimum height 100cm, bushy with healthy branches and lush green foliage in HDPE bag |
| 88 | Supply of Rhapis Palm having ht. 45 cm to 60 cm with 5 to 7 suckers, well developed,full of fresh andhealthy leaves in 25 cm size of Earthen pot / Plastic pot. |
| 89 | Supply of Areca Palm having ht. 1.80 m to 2.10 m with 8 to 10 suckers, well developed, fresh and healthy with lush green foliage in HDPE bag |
| 90 | Supply of Wadelia trilobata,full of leaves in 15 cm size in plastic. |
| 91 | Providing and Fixing Furcaria Variegated hybrid well developed with fresh & healthy foliage 20 and above attractive leaves in 35 cm Cement Pot. |
| 92 | Providing and Displaying Topiary of Casuarina fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. in 40 cm HDPE Bags /Cement Pot |
| 93 | Providing and Displaying Cyprus Golden Conical Shape 150 to 165 cm ht., with fresh and healthy Golden colour foliage in 35cm Cement Pot |
| 94 | Providing Mussaenda erythrophylla (Rosea) of height 60-75 cm. multi branched in earthen pot of size 25 cm |
| 95 | Supply of Plumeria alba dwarf dwarf of height 90-105 cm. with 3-4 branches and thick stem in big size HDPE bags |
| 96 | Providing and stacking of Pterospermum acerifolium (Kanak Champa) of height 150-165 cm. in big poly bags of size 25 cm |
| 97 | Providing and stacking of Cassia biflora of height 90-105 cm., well branched, bushy in big size HDPE bag |
| 98 | Cycus revoluta in 35 cm challi, specimen plant, having 30 to 40 with fresh and healthy, leaves having 25cm to 30cm circumfrance of base stem well developed |
| 99 | Providing and stacking of Largerstroemia indica diffrent color of height 90-105 cm. multibranched in poly bags of size 25 cm |
| 100 | Supply of Agave Plant well developed size 1.5 ht. And 8 to 11 leaves in HDPE bag |
| 101 | Providing and fixing of Yucca plant for the Ht. 2.5\" to 3\" in HDPE bags |
| 102 | Providing and Fixingof Juniperus prostrata with 10 to 12 latral branches ht. 3.5\" to 4\" and green foliage in HDPE Bags |
| 103 | Supply of grass turf |
| 104 | Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. |
| 105 | In rows 7.5 cm apart in either direction. |
AI Tender Summary
Tender Timeline
Oct 01, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedNov 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedNov 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender