|
| 1 | Supply and fixing of 6mtr long Double arm Decorative Poles for Roadway lighting made out of combo type Hot Dip Galvanized Pipes as per the IS:1161:1998 Bottom- 100mm x 1000mm, Middle- 80mm x 3000mm, Top- 65mm x 2000mm. the round arm brackets are made out of 40 mm pipes. the base plate size- 300mm x 300mm x 16mm with Ornamental cast Aluminium spigots at the bottom & brackets with an extensive treatment with sand blasting, PYU based etch primer & matt finish powder coating on the surface to make it absolutely rust & corrosion proof, as well as giving the pole a fantastic athelic look. Suitable for 2no of 60 W LED Tear Drop light fitting. The cost includes wiring, fixing on foundation all materials, labour, T&P and transportation etc. complete as per direction of the Engineer-in-Charge. |
| 2 | Supply and fixing of 60W Tear Drop LED light (Warm white)Heavy spun aluminium housing Heat resistant acrylic diffuser IP65.Rated Voltage-220VFrequency-50Hz Current 240V-0.150-0.180Wattage 240V-35-45W PF->0.9Make: Bajaj/Crompton/Havells/HPL or equivalent Model No. CBP-600-60-57-CP-NGR strictly as per design & drawing. |
| 3 | Construction of foundation for 6mtr Decorative Poles with supply of all materials, labour, T&P and transportation for providing earth work, filling in foundation all complete as per the OPWD specification & direction of Engineer-in-Charge. |
| 4 | Cable trenching in all type of soil excepting rocky soil including excavation of earth, bricks laying and filling of sand and loose earth to the original ground level with surface dressing after laying of 01 no. 1.1 K.V. PVC insulated PVC sheathed armored underground cable of size 04 core x 10sq.mm inside the trench and removal of surplus earth to a lead up to 05 KM. |
| 5 | Cable trenching by cutting of C.C./ B. T. Roadand laying of cable inside 50mm dia G. I. Pipe including excavation of earth,filling of sand and loose earth to the original ground level with surface dressing and making good to the surface with cement concrete after laying of 01 no. 1.1 K.V. PVC insulated PVC sheathed armored cable of size 04 core x 10sq.mm and removal of surplus earth to a lead up to 05 KM. |
| 6 | Supply and laying ofsize 04 core x 10 sq.mm PVC insulated PVC sheathed armored underground aluminum cable for power supply to Panel Board to street light poles including cost of materials, labour, T&P and transportation etc. complete as per direction of the E.I.C. ( Make- MESCAB / POLY CAB or equivalent) |
| 7 | Supply and laying of 50 mm dia HDPE Pipe inside the trench for laying of cable including cost of materials, labour, T&P and transportation as per direction of the Engineer-in-Charge. |
| 8 | Supply and wiring of 3 core 1.5mm square round flexible copper cable from junction box to light fitting (Make- Finolex/MESCAB and Polycab) as per the direction of the E.I.C. |
| 9 | Supply and fixing of 3 phase outdoor type Panel board made of 16 SWG- C.R sheet of size 3\"-0\" x2.\"-0\" x1\"-5\" ( L x B x D) with epoxy grey powder coated. The panel board consisting of the following accessories (i) Neon Indicator - 3 nos.(ii) Ring Copper Socket - 4 nos.(iii) 3 phase Timer - 1 no.(iv) Toggle Switch - 1 no.(v) 63 Amp 4 pole Contactor - 1 no.(vi) 3 phase 63 Amp 4 pole MCB-2 nos.(vii) Stud Connector 4 way, 1 no.(viii) 3 Phase Copper Bus bar - 4 nos.(ix) Danger Board - 1 no. with complete wiring with 10sq.mm / 4sq.mm / 2.5sq.mm copper wire as per direction of the E.I.C. |
| 10 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required. |
| 11 | Supply and laying 6 SWG G.I wires ISI marked at 0.5 meter below ground level for conductor earth elctrode including soldering etc. as required. |
| 12 | Supply of all materials, labor, T&P for providing C.C. (1:1½:3) with hard granite broken chips of size 12mm including cost, transportation, sundries, conveyance, royality of all materialsetc. complete as per direction of the Engineer-in-Charge. upto ground level : 1 x 3’-0” x 3’-0” x 2’-8” = 24.00 cft.Couping portion: 1 x 2’-0” x 2\"-0\" x 2’-0” =8cft. (-)Volume of pole up to top of couping : 3.14 x (0\"-5½\")² /4 x 4\"-8\" = (-) 0.77 cft. = 31.23cft. Or say 0.88cum per each for 2Nos. |
| 13 | Supply of all materials, labour, T&P and transportation for centering and shuttering of the couping portion etc. complete as per direction of the Engineer-in-Charge. 4 x1’-6” x 1’-6” = 9 sq.ft. Or say 0.83 sqm per each for 2Nos. |
| 14 | Supply and erection of 08 Mtrs. long swaged / step down type Steel Tubular Pole (Bottom Specification: 6.00m. Length x 139.70mm. O.D x 4.85mm. Thickness, Top Specification: 1.00m. Length x 88.90mm. O.D x 3.25mm. Thickness ) with earth work in excavation of foundation of size3’-0” x 3’-0” x 3’-0” = 0.76 Cum in all type of soil including rough dressing and leveling the bed etc. complete with transportation, T&P and labour charges as per the direction of the Engineer-in-Charge. |
| 15 | Supply and fixing of 150Watt LED floodlight made up of pressure die cast aluminium housing with toughened glass and hing power LEDs and secondary lenses with IP66 protection. System efficacy > 110/125LPW 10KV SPD included. (RGB if any Colour required)(Make: Crompton/Bajaj/HPL/Havells /Orient) |
| 16 | Supply of all materials labour, T & P and Transportation for fixing of50mm x 50mm Galvanized 2\"-0\" long channel in 8Mtr long tubular pole for fixing of flood light etc complete. |
