|
| 1 | Networking improving - Supplying all materials,labour and T&P for dismantaling of cement concrete road for laying of pipe line by mechanical means including stacking work,disposal of debris within a lead of 1000 m all complete as per specificationand direction of Engineer-in-charge. |
| 2 | Supplying all labour, material, tools & plants for dismantling of bituminous courses of flexible pavements and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately, all complete as per specification and direction of Engineer-in-charge. |
| 3 | Supplying all materials, labour, tools & plants for cutting ofmettaledroad for laying of pipeline including conveyance of all material at work, etc. all complete as per specification and direction of Engineer-in-charge. |
| 4 | Supplying all labour, T&P and earth work in excavation in all kinds of soil in pipe trenchs etc including dressing and levelling the bed and depositing the soil within 50M initial lead and 1.5M initial lift, as per the direction of the Engineer-in-charge. |
| 5 | Supplying all labour T&P for Tee connection of following sizes in the existingpipe line including cutting road such as metal ,asphalt and C.C and earth work excavation in all kinds of soil cutting of existing C.I/PVC pipe and inserting C.I/PVC specials and Tee including dewatering ,shoring shuttering ,refilling the trench /Pit with sand and excavated materials. mending by cocreting etc all complete as per direction of E.I.C |
| 6 | 150 X 150 mm dia TEE connection |
| 7 | 200 X 200 mm dia TEE connection |
| 8 | Supplying all materials labour T & P for cutting the following dia existing C.I. pipe line and pluging the same pipe with providing C.I.Specials etc complete including road cutting, earth work excavation, refilling, dewatering, shoring, shuttering,refilling the trench /Pit with sand and excavated materials. mending by cocreting etc all complete as per P.H.specification and direction of Engineer in charge.(including cost of materials) |
| 9 | 150mm dia Pipe |
| 10 | 200mm dia Pipe |
| 11 | 300mm dia Pipe |
| 12 | Supplying all materials, labour, and T&P for providing CImechanical joint socket conforming to IS:13382/92 to flange socket as per relevant IS with suitable flanged joints and fitting & fixing of following in pipeas per specifications including testing with cost of all jointing materials, transportation to site etc. all completeas per the specifications and directions of Engineer-in-charge. |
| 13 | 150mm dia MJ Socket- |
| 14 | 200mm dia MJ Socket - |
| 15 | 150mm dia MS Blank Flange (10mm thick) - |
| 16 | 200mm dia MS Blank Flange (12mm thick) - |
| 17 | Cutting of C.I /DI pipe by eletric arc welding,at site including cost of materials,labour,T & P etc all complete. |
| 18 | Supplying all materials labour T&P Dewatering by 5HP Diesel pump during cleaning of manholes including POL and operator. |
| 19 | Supplying all materials labour T&P and fabricating M.S pipes at site including laying in trenches MS pipe line ofwith painting all class conforming to IS 3589-2001 & IS 3601-2006 of the following diameter including costtaxes and transportation to site an as per specification complete ( earth work in trenches jointing of pipes specials fittings to be measured separately ) and as per direction of Engineering in charge. |
| 20 | 168.30mm OD M.S.Pipe 6.3mm thick |
| 21 | 219.10mm ODM.S.Pipe 6.3mm thick |
| 22 | Supplying M.S.flange of 10mm thick suitable for following dia of M.S./C.I pipes specials,valves with wastage including cost of materials, labour, T & P etc all complete. |
| 23 | 150mm dia M.S. Flange.(12mm thick) |
| 24 | 200mm dia M.S. Flange.(12mm thick) |
| 25 | 25mm dia GI Socket |
| 26 | 25 mm diaGI Pipe |
| 27 | Supplying all materials, labour and T&P for making flanged joints for C.I. pipes and specials of the following diameter including testing of joints as per specification and direction of E.I.C. |
| 28 | 150mm dia - |
| 29 | 200mm dia - |
| 30 | Supplying all labour and T&P for cutting of following dia MS pipe of following thick in treanches by gas cutter set of pocket etc all complete |
| 31 | Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes upto 8mm thickand fittings at site by using welding generator including testing of joints, as per specification complete |
| 32 | Fixing cast ironDI Resilient Seated Glandless Gate Valve of RATING PN - 1.60(IS 14846/2000) with double flanged ends (with wheel)for water works purpose for the following rating & nominal diameters but (including cost of Sluice Valves) of reputed make (Vag/ Tallis/ AVK) |
| 33 | 150mm dia D/F Sluice Valve |
| 34 | 200mm dia D/F Sluice Valve |
| 35 | Supplying all labour, T&P materials etc. and the construction of brick masonary sluice valve chamber of over all of following internal earth work in excavation in all kinds of soil laying of 150mm thick CC (1:3:6) with crusher broken hard granite metal up to 4cm size metal 250mm thick brick masonary work in C.M(1:4) with fly ash bricks having crushing strength between 75kg/cmsq. 12mm thick cement plastering with C.M(1:3) for inside surfaces and out side cement pointing etc. all complete as per the approved drawing if any and the direction of Engineeer-in-charge or R.C.C Chamber including pre cast cover slab with M-25 concrete. |
| 36 | FOR INTERNAL SIZE OF VALVE CHAMBER 0.90m X 0.90mx1.00m |
| 37 | Supplying all materials, labour and T&P for Transportation ofexcavated material & disposingupto 5KM from work site including loading, unloading & stacking, supplying of all labours, tools & plants etc. all complete as per specification and direction of Engineer-in-charge. |
| 38 | Supplying all materials Labour& T & Pfor Fixing of Tamper proof Air Valvefor water works purposes conforming to IS specification for the followingnominal diameters as per specificationcomplete including cost of Air valve .(Vag/ Tallis/ AVK/ Bermad/Dorot make ) |
| 39 | 25mm dia Tamper proof Duojet Air Valve |
| 40 | Pipe Laying:- Laying in trenches Centrifugally Cast (Spun) Ductile Iron pressure, socket and spigot pipes Class K7 without cement mortar lining conforming to IS:8329 - 2000 of the following nominal diameter as per specification complete. (Earthwork in trenches, jointing of pipes, specials and fittings to be measured and paid for separately) (including cost of pipe) |
| 41 | 200mm dia Di Socket & Splgot Pipes |
| 42 | Supplying all materials labour T & P for Providing Push-on-Joints confirming to IS: 3114 to centrifugally (Spun)cast Iron Pipes or Ductlle Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality, testing of joints, etc, a complete as per specification and direction of Engineer-in-Charge including supplying of all labour, material, tools & plants required to perform the work. (Excluding cost of Rubber ring) |
| 43 | 200mm DI |
| 44 | Fillingin foundation and plinth with sand wateredand rammedincluding cost of all labour, materials, T & P etc all completeas per direction of the Engineer-in-charge |
| 45 | Supplying all labour, material, tools & plants for Providing and laying PLAIN CEMENT CONCRETE of proportion 1:3:6 (1 Cement : 3 coarse sand : 6 crusher broken granite chips 40 mmsize). as specified, for all works from 3.5m above ground level to 1.5m below ground levelin any shape, position, thickness, finishing the top surface rough or smooth, tamping, ramming, vibrating, curing etc. all complete,including cost of all materials, taxes,labour, lead, transportation of concrete, T & P, but excluding cost of shuttering work, all completeas per specification and direction by Engineer In-Charge for Restoration/ mending of Roads required due to laying of Pipe line. |
| 46 | Supplying all labour, material, tools & plants for Providing and laying PLAIN CEMENT CONCRETE of proportion 1:2:4 (1 cement : 2 coarse sand : 4 crusher broken granite chips 12 mmsize) as specified, for all works from 3.5m above ground level to 1.5m below ground levelin any shape, position, thickness, finishing the top surface rough or smooth, tamping, ramming, vibrating, curing etc. all complete,including cost of all materials, taxes,labour, lead, transportation of concrete, T & P , but excluding cost of shuttering work, all completeas per specification and direction by Engineer In-Charge forRestoration/ mending of Roads required due to laying of Pipe line. |
| 47 | Filling in foundation and plinth with excavated materials including watering and ramming as directed by the Engineer-in-charge. |
| 48 | Supplying all materials labour T & P for Providing C.I./D.I specials conforming to I.S.-9523:2000 of the rrquired diameter as per P.H. specifications including carriage of materials from store to work site etc complete.(excluding earth work in excavation,jointing and including cost of specials) |
| 49 | House Connection- Supplying all materials , Labour & T & P for providing New House connections to beneificiares from PHE Deptt./WATCOCI/DI pipe line to the property of beneficiaries/ Repair of House connection with extension of service etc.including earth work excavation ,cutting of concrete / Metal/ BT road, refilling the trenches & making good to the damages road with CC (1:2:4) after completition ofthe work, lifting of excess excavated materials / debrises from work site & disposed within 5 KM radiousby mechanical transport , fixing 1/8\" dia brass/ GM ferrule with following dia composite Strap Saddle in the CI/DI pipe line , cutting holes in brick/ stone / RCC masonary work , repair the broken holes , cost of uPVC Schedule - 80 pipe (25 mm / 20 mm dia up to 7.0mtr /10 mtr respectively )& fittings , 1 No of PVC Tap of approved make etc. complete as per technical & PH specification and direction of Engineer - in Charge. |
| 50 | With 200mm dia Distribution Line |
| 51 | With 150mm dia Distribution Line |
| 52 | Supplying all materials Labour & T & P for fitting & fixing of 20mm dia HDPE pipe (10kgf/cm2) with compression fittings for connection with ferrule & uPVC service pipe of different diameter to make the connection leak proof including cost of required length of 20mm dia HDPEpipe up to 1.0 mtr ,both side elbow/Female threaded elbow/Male threaded elbow/Both side adopter/Male threaded adoptor/ Female threaded adoptor etc.completeas per site condition & ditrection of Engineer in charge. |
| 53 | PLC & Chlorination room - Supplying all materials labour T&P providing Earth work excavation of foundation in all kinds of soil within initial within 50mtrs lead and 1.5mtr initial lift including levelling dressing and breaking clodsetc all complete as per direction of Engr-In-Charge. |
| 54 | Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately |
| 55 | Supplying all materials labourT & P for filling sandincluding cost, royalty and conveyance of materials to site etc all complete as per direction ofEngr-in-Charge. |
| 56 | Cement concrete (1:3:6)using 40 mm. size hard granite crusher brokenmetal including watering and curing including cost, conveyance, royalties and taxes of all materials, labour, T&P etc. complete as directed by Engineer-in charge. |
| 57 | Dismantling brick or stone masonry in Lime/Cement mortarbelow 3m. height including stacking the useful materials foreuse and removing the debris within 50m. Lead |
| 58 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:6) in foundation and plinth |
| 59 | Brick work with Fly ash bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percentt in cement mortar (1:6) in Superstructure . |
| 60 | Supplying all materials,labour and T&P for filling foundation and plinth with excavated materials as per direction of Engineer-in-charge. |
| 61 | Supplying all materials labour T & P and providing fitting fixing of GI /MS pipe with fittings etc all complete as per direction of Engg-in-charge. |
| 62 | a) 100mm dia GI pipe |
| 63 | b) MS Square Hollow size 40mm (including cutting , welding & fixing) |
| 64 | c) 100mm dia MS Flange (10mm thick) |
| 65 | Rigid smooth centring and shuttering for R.C.C. works including false work and dismantlingthen after castingincluding cost of materials complete in ground floor. |
| 66 | Roof slab |
| 67 | Base footing of Columns |
| 68 | Column and Beams |
| 69 | Lintel |
| 70 | Chhaja |
| 71 | Supplying all materials labour T & P for with cement concrete (1:1½:3) forRCC column & roof slab using 12 mm size crusher broken granites chips includingcost, tax, lead,watering curing etc. all respect. |
| 72 | Supplying ,fitting and placing uncoated HYSD bar reinforcement complete as per drawing and technical specification |
| 73 | Supplying all materials ,labour, T & P and providing C.C.(1:2:4) using 12mm size black hard cruser broken wateringcuring etc. all complete as per direction of Engineer-in-charge. |
| 74 | Supplying all labour,T&P,materials for fittings, fixing of vetrified floor tile of size 600mm x 600mm of equivalent make ( premium) with application of polymer modified cement base water resistant adhesive bed of required thickness 10mm and filling the joints with epoxy grout of approved quality etc. all complete. |
| 75 | Fixing Vertified industrial floor tiles of premium grade having thickness 8mm to 10 mm confirming to IS:4457 of size 30cm x 30cm infloors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing & polishing complete. |
| 76 | Providing 12mm thick cement plastering in C M (1:4) wih punning overBrick masonryincluding cost,conveyance & taxes of all material ,labour, T&P etc all complete . |
| 77 | Providing, fitting & fixing of false ceiling with Arm strong silhouette main runner, cross tee, wall angel with fine fissured RH-99 board on 4 walls to be fixed by means of steel screw, PVC plug & the Arm strong grid 2\"-0\" x 2\"-0\" suspended from ceiling etc. complete. |
| 78 | Provision for cement painting two coats over a coat of primer, all complete. |
| 79 | Providing, fitting and fixing Solid PVC Flush door with door frame including both side pannelling etc, all complete in all respect as per the direction of Engineer-in-Charge. |
| 80 | Supplying fitting fixing of UPVC window (sliding type) madeas window frame section number 4095,4096 & 9777,3994 as shutter frame with5mm thick plane glass as pannel fitted with rubber bending including locking arrengement including all fittings including cost of materials all taxes labour T & P excluding cost of glass etc complete as per direction og Engr-in-charge . |
| 81 | Supplying all materials labour T & P and providing finishing plaster surface of walls with Acrylic WallPutty etc all complete as per direction of Engg-in-charge. |
| 82 | Supplying all materials labour T&P and providing priming one coat with any approved primer for C.P. wall (water bound primer)etc all complete as per direction of Engr-in-charge. |
| 83 | Supplying all materials labour T&P and providing Plaastic Emulsion painting two coat on plaster surface including one coat water bound primer etc all complete as per specification and direction of Engr-in-charge |
| 84 | Supplying all materials labour T&P providing fitting fixing of fabricated MS grill made out of MS angle & plate with fittinf fixing of aldrop,L hook,hinges with both side locking arrangement including Priming with red oxide primer etc all complete as per direction of Engr-in-charge. |
| 85 | Supplying all materials, labour, T&P and fixing of ceramic glaze tiles in dados, skirting with 300mm x 200mm sizeon 12mm. thick C.M. plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shed of the tiles including rubbing, polishing etc all complete. as per the direction of the Engineer in charge. |
| 86 | Supplying all materials, labour, T&P and fitting and fixing of30 mm single panel PVC door shutter withdoor frame of 40mmx48mm sizeof approved quality including fixing materials and cost , transportation , taxes etc. all complete in all respect as per the direction of the Engineer-in-charge. |
| 87 | Supplying all materials labour T&P for providing fitting and fixing of following P.H fixtures & sanitary installations including jointing materialsetc allcomplete as per direction of Engg-in-charge. |
| 88 | a) 10 ltr capacity flushing L/L cistern (I.S.No-7231) with PVC make all internal fittings with flush bend.(White) |
| 89 | b) commod seat cover |
| 90 | c) 15mm CP Twin Bib Cock long body(Amber/Delux) |
| 91 | d) Health Fucet (1.50 mt) |
| 92 | e) 15mm dia CP/Brass Angle Stop Cock (Plaza) |
| 93 | f) 15mm dia CP/Brass Long Body Bib-cock(Plaza) |
| 94 | g) 20mm dia CP/Brass Concealed Stop-cock |
| 95 | h) 20 mm x 600 mm long CP Towel Rail |
| 96 | i)Cp glasscorner shelf with glass : |
| 97 | j) 15mm dia CP revolving shower with 9\"arm |
| 98 | k) CP Soap Holder |
| 99 | l) 125 mm dia CP Gratting |
| 100 | Supplying all materials,labour and T&P for cutting grooves in pucca floor and walls for taking G.I. pipes and fittings /P.V.C. pipes and fittings and making good to the damages all complete as per specification. |
| 101 | Providing and fixing to wall, ceiling and floor / in treanches ofUPVC ASTM (Sch-80)pipe& fittings of following nominal bore with clamps; including making good the wall ceiling and floor, all complete(including the cost of materials ) as per the PHE specification and direction of the Engineer-in-charge. |
| 102 | 20mm dia uPVC pipe -(Wall) |
| 103 | 25mm dia uPVC pipe -(trench) |
| 104 | 25mm dia UPVC Ball valve - |
| 105 | 25mm brass /G.M.F.W.Valve(ISI) |
| 106 | Supplying fitting & fixing of the following H.C.I./ P.V.C S.W.R pipe & fittings as per PH specification & direction of EIC. |
| 107 | 110mm dia PVC SWR Pipe(double socket) |
| 108 | 110mm dia PVC SWR Door Bend |
| 109 | 110mm dia PVC SWR Plain Bend |
| 110 | 110mm dia PVC SWR P Trap |
| 111 | 110mm dia PVC SWR Cowl |
| 112 | 110mm dia PVC SWR Clamp |
| 113 | Supplying all materials, labour and T&P for construction of inspection chamber as per P.H. specification and design all complete.[ including earth work ] |
| 114 | Inspection chamber size (0.75x0.75x0.45mtr.)with SFRC man hole cover-600mm dia |
| 115 | Conveying of surplus excavated earth,debries and dismentle materials from working area to distant place with in 5km lead by mechanical means with all cost. |
| 116 | Internal & External Electrification- Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard) |
| 117 | Light points |
| 118 | Group-A |
| 119 | Group-B |
| 120 | 5A Plug Point |
| 121 | Fan Point (Group - A) |
| 122 | Supplying all materials labour & T & P for fitting & fixing of following electrical installations including testing & commissioning etc. complete as per direction of Engineer in Charge. |
| 123 | Step up modular regulator for Fan |
| 124 | 15watt LED Bulb. |
| 125 | 1200mm Ceiling Fan (Havells make Fusion) |
| 126 | Electric 200mm Exhaust Fan (Havells Ventil air DB) |
| 127 | 18W ultra bright LED tube light Titania Sleek T5- (Double side connection) (Make: Philipa/Havels) |
| 128 | 32A Double Pole MCB.(Schinder/Semens/Legrand) |
| 129 | 63A Double Pole MCB.(Schinder/Semens/Legrand) |
| 130 | 5 Amp switch |
| 131 | 5 Amp socket |
| 132 | Ceiling Rose - |
| 133 | Angle Holder |
| 134 | Supplying, fitting and fixing of 15 Amp plug point with line connection and testing charges.. |
| 135 | Supplying all materials labour & T & P for fitting & fixing of 1.5 ton capacity AC including testing & commissioning etc. complete as per direction of Engineer in Charge. (LG/Voltas/Blue Star) |
| 136 | Supply and fixing of 12way (12+36) double door horizontal type three pole and neutral, sheet steel, MCB distribution 415V on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB khobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required (But without MCB/RCCB/Isolator) make-HPL/Havells/Legrand/L&T/C&S) |
| 137 | Supply and fixing of 5Amp to 32A rating 240 V/415 V \"B\" series MCB suitable for lighting and other loads of the single pole in the existing MCB DB ISI marked complete with connections testing and commissioning etc (make-HPL/Havells/Legrand/L&T/C&S) |
| 138 | Surface wiring to submain in the in 20nm dia FR PVC insulated single ore multistrand copper conductor of ISI marked confirming to IS:694/1990 non metallic heavy duty flexible conduit along with the FR PVC insulated single core multistrand copper conductor as earth wire as required (Make of wire: Finolex/L&T/Anchor/Havells/V-Guard/HPL) |
| 139 | 2x1.5 sqmm+1x1.5sqmm |
| 140 | 2x2.5 sqmm+1x1.5sqmm |
| 141 | 2x4.0 sqmm+1x1.5sqmm |
| 142 | Supply, installation, testing and commissioning of main switches (IS:13947 part-3/1993) of 200AMP ICTPN main switch with MS board on existing surface / wall mounting and complete with HR fuse links, interconnections, earthing etc as required as per diretion of Engineer-in-charge. (Make: Seimens/HPCL/Anchor/L&T/Havells/C&S/RK) |
| 143 | Supply of 16sqmm insulated PVC sheathed (heavy duty) Armoured Aluminum conductor 3 1/2 core for working voltage upto 1100 volt confirming to IS:1554 Part-I of reputed make like Havels/Finolex/Nicco/Floster including transportation etc complete. (From Transformer to Main Switch, Main Switch to Kit Kat, Kit Kat to MCB, Main Switch to Change over, Change over to DG Set) |
| 144 | Laying of insulated PVC sheathed (heavy duty) Armoured Aluminum conductor 3 1/2 core for working voltage upto 1100 volt confirming to IS:1554 Part-I of reputed make like Havels/Finolex/Nicco/Floster for labour charges only. |
| 145 | Supplying all material, labour, T&P for making earthing with supply of 40mm G.I. Pipe of 3 mtr long & flange with all types of earth work & filling charcoal etc all complete including cost and conveyance of all materials to site as per the direction of Engineerin-charge. |
| 146 | Supplying and fitting fixing of 15W LED Endura DL 15 square recessed mounted square dowlighter with all extrusion square ring & MS powder coated white housing and separate replaceable electronic driferetc all complete including cost and conveyance of all materials to site as per the direction of Engineerin-charge. (Make: Philipa/Havels) |
| 147 | Supplying and fitting fixing ofelectronic type fan regulator with line connection and testing charges etc all complete including cost and conveyance to site as per the direction of Engineerin-charge. (Make: Cona/Anchor/Usha/Bajaj) |
| 148 | Supplying and fitting fixing of Gate Light ENDURA 24 W Cityliner NEW new generation energy saving & environmental frindly long life verstile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover with line connection and testing charges etc all complete including cost and conveyance to site as per the direction of Engg-in-charge. (Make : Philips/Havels) |
| 149 | Supplying, fitting and fixing of D.P main switch (63Amp) with all necessary connection.(Havels/L&T/Anchor) |
| 150 | Supply, Installation, Testing Wiring & Commissioningof Lighting Distribution Panel Made out of 2MM C.R sheet, Duely Powder coated, Floor mounted, Front operated, complete with Rated Alluminium BusBar and interconnection with copper wire and lugs.Having63A 4P MCB-1 Nos,32A FP MCB-2 Nos, 32A DP MCB-1 Nos, 16A DP MCB-3Nos, 10A DP MCB-1Nos,All switchgear and controlgear make- Siemens,schneider,ABB,L&T,LEGRAND. All completed asper electrical specification and as per direction of EIC. |
| 151 | Supplying fitting & fixing of Single arm Bracket of 1.0 mtr lengthsuitable for fixing in 70mm top yard lighting octagonal smart pole |
| 152 | Cable junction boxes IP66/69 weather proof for outdoor installation of size 104mm x 104mm x 70 mm (with knockouts for cable entry - Black colour) Preferable Hensel make Cat No. KF 0404B) |
| 153 | Connector suitable for 4sqmm For yard lighting |
| 154 | 2.50 Sqmm 4 core copper armoured Cable including laying |
| 155 | Supply fitting & fixing of energy saving & envoirnmental friendly long life pressure die cast housing with toughened glass& with option of secondary optic with IP66 protection 45 Wt LED light .(Preferable HALONIXmake Freedom LUNOS - SUPER l Cat No.HLSLD-15-45-CWL-R) |
| 156 | Supply fitting & fixing of following materials for Yard Lightingarrangement inside Pumping station campus etc complete.. |
| 157 | 19 mmService Cable Gland |
| 158 | 2.5 mm copper cablesocket |
| 159 | Supply fitting fixing & errection of Hot dip octagonal smart pole for mounting and installation of the LED street light Luminaries as per following technical specifications - (i) Height - 6.00 mtr (ii) Top dis - 70 mm (iii) Bottom dia -130mm (iv) Sheet thichness - 3 mm (v) Base plate dimension - 200 mm x 200mm x 12mm with required bolt & fittings |
| 160 | Site Development- Supplying all materials,labour and T&P for hire charges of JCBone Cum Bucket on excavation & cleaning the vacant area etc. all complete andas per direction of Engineer-in-charge. Hydraulic excavator of 1 cum bucket |
| 161 | Providing & fixing Concertina Coil fencing with punched tape concertina coil 600mm dia 10.0 Mtr openable length (total length 90m), having 50 nos rounds per 6m length, upto 3m height of wall with existing angle iron \"U\" shaped placed 2.40mapart and with 10 horizontal R.B.T. reinforced barbed wire stud tied with GI staples & GI clips to retain including all cost of materials, labour, transportation etc, all complete as per specification and direction of Engineer-in-charge. |
| 162 | Quarring and collecting supplying & stacking of approved stacking yard in regular box heap of to be measured as one cum of good quality lawn earth stacking in clading cost carriage etc complete as per direction of EIC |
| 163 | Supplying of cow-dung as manure including transportation etc all complete as per the direction of Engineer-in-charge. |
| 164 | Supplying of fertilizer, pesticides to be applied in initial and periodical use as requiredetc all complete as per the direction of Engineer-in-charge. |
| 165 | Supplying of labour for weeding, mowing and periodical cleaning of Lawn with termite treatment for one month etc. all complete etc all complete as per the direction of Engineer-in-charge. |
| 166 | Supplying all labourT&P for preparing the beduniformly and planting the garden grass including watering and weeding for a period of one month and application of fertilizer and organic manure etc. all complete |
| 167 | Planting of Trees SPS /(17\"x18\" poly pack) Digging pits removing all unserviceable materials and dumping outside the working area as shown by the Officer-In-Charge, supply and filling the same pits with good quality garden soil and well decomposed cow-dung manure mixture of ratio 4:1 and required quantities of fertilizer, pesticides, supply of planting material with specified saplings as per the requirement, taking up maintenance over 1month, work like watering, weeding application of fertilizer, pesticides etc. including cost of men, material, tools, tackles all complete. |
| 168 | Providing compacted stone screened dust in layers wateringand compactingincluding cost of all materials labours T&Petc. complete.(excluding PRR) |
| 169 | Providing Supplying, fitting and fixingof60mm thick interlock concrete colourpaver block on compacted river coarse sand free from all organic materials and filling the joints with sand. including cuttingcorbelling, splays where ever necessary to proper size with cost, conveyance, royalties and taxes of all materials and cost of all labour, etc. complete in all respect as directed by Engineer in charge. |
