Tezpur University has published Providing Electrification Work And Fitting And Fixing Of Aluminium Partition In Data Science Lab Dept Of Computer Science And Engineering At Tu Campus Electrical And Aluminium Partition Work. Submission Date for this Tender is 21-10-2022. Electrification Work Tenders in tezpur Assam. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | ELECTRICAL WORKS |
| 2 | Wiring for circuit/submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor,single core cable in surface/recessed steel conduit as required. |
| 3 | 2X2.5 sq.mm + 1X2.5 sq.mm earth wire. |
| 4 | 2X10 sq.mm + 1X6 sq.mm earth wire. |
| 5 | 4X6 sq.mm + 2X6 sq.mm earth wire. |
| 6 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
| 7 | 200mm X 125mm X 60 mm deep. |
| 8 | Supplying and fixing following piani type switch/socket on the existing switch box/cover including connections etc.required. |
| 9 | 5/6amps switch (Anchor) |
| 10 | 6A Socket (Anchor) |
| 11 | Supplying and fixing following way, horizantal type three pole and neutral,sheet steel, MCB distribution board, 415 V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din earthing etc. as required.(But without MCB/RCCB/Isolator). |
| 12 | 4way (4+12), Double door |
| 13 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, ""C"" curve, miniature circuit breaker suitable for include load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 14 | Single pole 10A,MCB |
| 15 | Double Pole 5-32 A DP,MCB |
| 16 | Three pole with neutral 5-32 A |
| 17 | Earhting with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. |
| 18 | Providing and fixing 25 mm X 5 mm G.I.strip on surface or in recess for connections etc.as required. |
| 19 | ALUMINIUM PARTITION WORKS |
| 20 | Providng and fixing aluminium works of doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions,i.e.at top , bottom and sides with required including cleat angle ,Aluminium snap beading for glazing/paneling, C.P. brass/stainless steel screws, all complete as per archtitectural drawings and the directions of Engineering-in-charge.(Glazing,paneling and dash fasteners to be paid for separately): |
| 21 | Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868,Minimum anodic coating of grade AC 15) |
| 22 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade I Type II, in paneling fixed in aluminium doors,windows shutters and partition frames with C.P.brass/stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. |
| 23 | Pre-laminated particle board with decorative lamintaion on one-side and balancing lamination on other side. |
| 24 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item): |
| 25 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
