Construction Of Community Toilet At South Khairbari Eco Park In Khairbari Gp Under Madarihat-Birpara Block Co
Tender Value
6.88 Lakhs
Estimated cost
Bid Submission
12 Oct 2022
0 days left
EMD
13766
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
madarihat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Community Toilet At South Khairbari Eco Park In Khairbari Gp Under Madarihat-Birpara Block Co
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil bul excluding laterite or sandstone) including removing, spreadlnq or stacking the spoils within a lead of 75 m as directed. The ilem includes necessary trimming the sides of trenches, levellinS dressing and ramming the bottom, bailing out water as requrreo complete. (a) oepth of excavation notexceedin81,500 mm. |
| 2 | Earth work in filling in foundaiion trenches or plinth with good earth,in layers not exceedjng 1500 mm. including watering and rmming etc. layer by layer complete. {a) With earth obtained from excavation of foundation |
| 3 | c) (i) With carried earth arranged by the contractor within a radius of 1 km. including cost of carried earth. |
| 4 | Single Brick flat soling of picked jhama bricks incluiding ramming and dressing bed to proper level |
| 5 | Cement conctete with 30 mm graded stone exlud;ng shuttering. river bazree (b) 1:3:6 river bazree. (A) In Ground floor |
| 6 | Ordinary Cement concrete (mix 1: 1:5:3) with graded stone chips (20 mm nominal size) cecluding shuttering and reinfor cement if any in ground floor as per relevant IS codes ii) River Bazreea) in ground floor |
| 7 | (A) Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved slout props and thick hard word of approved thickness with required bracing Ior -sete slabs, beams, columns, lintels curved or straighl including fitting fixing and striking out after completioo ofworks, (upto root of ground froor) (f) 25 mm to 30 mm shuttering without staging in foundation |
| 8 | (B) Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved slout props and thick hard word of approved thickness with required bracing Ior -sete slabs, beams, columns, lintels curved or straighl including fitting fixing and striking out after completioo ofworks, (upto root of ground froor) (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 9 | Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups. binders etc. including supply of rods initial straightening and removal of loose rust (if nevcessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (i) Tor steel/Mild SteelI.SAIL/TATA/RINL |
| 10 | 125 mm thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 11 | Brick work with 1st class bricks in cement mortar (1:6)(b) In superstructure, ground floor |
| 12 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary (ground floor). (Excluding cost of chipping) over concrete surface With (i) With 1:6 cement mortar (c) 15 mm thick plaster |
| 13 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and racking out joints or roughening of concrete surface including throating, nosing and drip course where necessary (ground floor). (Excluding cost of chipping) over concrete surface With 1:4 cement mortar 10 mm thick plaster |
| 14 | M.S. or W.I. Ornamental grill or approved design joints continuously welded with M.S, W.I. flats and bars for windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 15 | Supplying 1.5mm thick M.S. sheet fitted …………………..as per design including cost of all labour and materials. |
| 16 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mm (+/-0.2mm), horizontal section will be joined with vertical section by galvanised steel screws after inserting two number steel brackets as reinforcement making suitable space for placing hinges, one steel tube 40mm x 20mm x 1.20 mm will be inserted on one full vertical side of the frame (hinge side) as reinforcement, the frame will then be fixed in the opening with the help of P.V.C. expandable fastner/wooden gutties and galvanised steel screws including cost of all materials and labour, hire charges of tools and appliances, carriage of all materials, taxes and all other incidental charges complete. |
| 17 | Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter………… |
| 18 | Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 19 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (a) On timber or plastered surface :(iv) Two coats (with any shade except white) |
| 20 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 21 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary (b) On steel or other metal surface : With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 22 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. (ii) 25 mm. thick |
| 23 | Sanitary & Plumbing (Details in bill) |
| 24 | Electrification |
| 25 | Add GST @12% |
| 26 | Add LW Cess @1% |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 12, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender