Public Works Department-PWD has published Rprng, Maintenance 0.65 Mgd Swtp Under Amp Incl Mtc And Fixing Of New Sluice Valves, Repair, Fixing New Monoblock Pmotor, Mtc. Of Dosing Line, Rain Water Pipes, Wtr Proofing Of Roof, Rprng Of Plstrs, Pantng, Fixing Of Tiles In Lbrtry, Cnstrn Of . Submission Date for this Tender is 20-10-2022. Sluice Valve Tenders in Gomati Tripura. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. -All kinds of soil |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. -All kinds of soil |
| 3 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. a) All work upto plinth liveli) 1:4:8 ( 1 Cement: 4 fine sand : 8 graded well burnt brick aggregate 40 mm nominal size) |
| 5 | Centering shuttering including struttings, propping etc. and removal of form work for: (i) Foundations, footings, bases for columns etc. for mass concrete with timber plank |
| 6 | ii) Lintels, beams, plinth beams, girders, bressumers and cantilevers with wooden plank |
| 7 | iii) Suspended floors, roofs, landings, balconies and access platform with timber planks |
| 8 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement. - All work upto plinth level: i) 1:2:4 ( 1 Cement: 2 fine sand : 4 graded well burnt brick aggregate 20 mm nominal size) |
| 9 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level i) Thermo-Mechanically Treated bars of gradeFe-500D or more |
| 10 | First class brick work in foundation and plinth including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 11 | First class brick work in superstructure above plinth level & upto floor-five level including cost of all materials as required complete:- i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 12 | Extra for brick work in triangular, square and rectangular pillars including cost of all materials as required complete. |
| 13 | Half brick masonry work with first class bricks in foundation and plinth including cost of all materials as required complete:- (i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 14 | Half brick masonry work with first class bricks in superstructure upto floor five level including cost of all materials as required complete:- (i) In cement mortar 1:4 ( 1 cement : 4 fine sand ). |
| 15 | 15 mm cement plaster on the rough side of single or half brick wall of mix (i) Cement mortar 1:4(1 cement:4 fine sand) |
| 16 | 12 mm cement plaster of mix. (i) Cement mortar 1:4(1 cement:4 fine sand) |
| 17 | Neat cement punning. |
| 18 | Providing and fixing M.S. round holding down bolts withnuts and wahser plates complete as per standard design. |
| 19 | Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(i) 0.63 mm thick with zinc coating not less than 275 gm/m2. |
| 20 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under including cutting the patch in proper shape and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with all leads and lifts including finishing even and smooth and curing complete as per direction of the Engineer in charge:- (i) With cement mortar 1:3 ( 1 cement : 3 fine sand ). |
| 21 | White washing with lime to give an even shade on old work as required complete as per direction of the Engineer in charge. -Two or more coat. |
| 22 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 23 | Distempering with dry distemper of approved brand and manufacture and of required shade on old work ( one or more coats ), to give an even shade as required complete as per direction of the Engineer in charge. |
| 24 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture on old work ( one or more coats ) including preparation of surface as required complete as per direction of the Engineer in charge. |
| 25 | Painting with synthetic enamel paint ( one or more coats ) of required colour of approved brand and manufacture on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. |
| 26 | Floor painting with floor enamel paint ( one or more coats ) of approved brand and manufacture of required colour on old work to give an even shade including preparation of surface as required complete as per direction of the Engineer in charge. |
| 27 | Distempering with oil bound washabale distemper of approved brand and manufacture and of required shade on new work (two or more coats ), over and including a priming coat of cement primer to give an even shade complete. ( Payment shll bemade after submission of Test certificate issued by the manufacturer) |
| 28 | Finishing walls with water proofing cement paint of required shade of approved brand and manufacture [Payment shall be made after submission of Test Certificate issued by the Manufacturer] : New work ( two or more coats applied @ 3.84 kg/10 sqm) |
| 29 | Providing 40 × 5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30 × 10 × 15 cm 1:3:6 mix (1 cement : 3 find sand: 6 graded well burnt brick aggregate 20 mm nominal size) |
| 30 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. all complete. -Fixed to steel windows by welding. |
| 31 | Providing and fixing GI pipes medium class as per IS : 1239 with latest amendment complete with G.I fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer-in-charge. A. External work (i) 32 mm dia nominal bore |
| 32 | Providing and fixing 1st quality ceramic glazed wall tiles (minimum 200 x 300) conforming to IS : 15622 - 2017 (thickness to be specified by the manufacturer) of approved make in all colours, shades of any size as approved by Engineer-in-charge in skirting, risers of steps and dados, laid over 12 mm thick bed of cement mortar 1 : 3 (1 cement : 3 fine sand) jointed with ordinary cement slurry including pointing with white cement mixed with pigment of matching shade complete |
| 33 | Providing and laying ceramic floor tiles in different sizes (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 - 2017 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid over 20 mm thick cement mortar 1:4 (1 cement : 4 fine sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. -Mat Finish Tiles (i) Ceramic Tiles 1st quality 300 x 300mm in all shades and designs |
| 34 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 - 2017, of approved make, in all colours and shades, laid over 20mm thick cement mortar 1:4 (1 cement : 4 fine sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. -Soluble Salt Stainfree vitrified tiles (i) Size of tile 60x60 cm |
| 35 | Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance +/- 1mm) with wall thickness 2.0mm+/- 02mm. corners of the door frame to be jointed with galvanized brackets and stainless screws, joint mitred and plastic wilded. The hinge side vertical of the frames reinforced by galvanized MS tube of size 19 × 19 mm and 1 mm +/- 0.1 mm wall thickness and 3 nos stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-In-Charge. (i) Extruded section Profile size 48x40 mm |
| 36 | Providing and fixing to existing door frames. (i) 30mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a UPVC profile section of size 30mm x 60mm and wall thickness 2mm ± 0.2mm with inbuilt decorative moulding edging on one side. The styles and rails with plastic brackets of size 75×220 mm mitred and welded at the corners. The styles of the shutter reinforced by inserting galvanised MS tube of size 25×20 mm and 1 mm ± 0.1 mm wall thickness. The lock rail made up of "H" Section, a UPVC profile section of size 30×100 mm and 2 mm ± 0.2 mm wall thickness welded to the shutter style with a UPVC profile section single panel of size not less than 620 mm, having overall thickness of 20 mm and 1 mm ± 0.1 mm wall thickness with 20 mm panel beading of suitable size/Glass (4 mm thick plain glass)/ louver section, louver frame of suitable size, complete as per manufacturer"s specification and direction of Engineer-In-Charge. (for W.C. and Bathroom door shutter). |
| 37 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete : (i) 300 x 16 mm |
| 38 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : (i) 200 x 10 mm |
| 39 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm (i) 125 mm |
| 40 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : (i) White Vitreous china Orrisa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 41 | Providing and Fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern. |
| 42 | Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet: (i) 250 x 130 x 30 mm |
| 43 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. -Semi rigid pipe (i) 32 mm dia |
| 44 | Providing and fixing PTMT Waste Coupling for washbasin and sink, of approved quality and colour. (i) Waste coupling 31 mm of 79mm length and 62mm breadth weighing not less than 45 gms. |
| 45 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : (i) White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 46 | Providing and fixing brass bib cock of approved quality : (i) 15 mm nominal bore |
| 47 | Providing and fixing brass stop cock of approved quality : (i) 15 mm nominal bore |
| 48 | Providing and fixing ball valve (brass) of approved quality High or low pressure, with plastic floats complete : (i) 15 mm nominal bore |
| 49 | Providing and fixing uplasticised PVC connection pipe with brass unions : -30 cm length (i) 15 mm nominal bore |
| 50 | Providing and fixing soil, waste and vent pipes: -100 mm dia. (i) Sand cast iron S&S pipe as per IS: 1729 |
| 51 | Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. -100x100x100 mm (i) Sand cast iron S&S as per IS - 1729 |
| 52 | Providing and fixing terminal guard: -100 mm (i) Sand cast iron S&S as per IS - 1729 |
| 53 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes (working pressure 4 kg/cm2) conforming to IS : 13592 Type A includinjointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion: (i) Single socketed pipe - 110 mm OD |
| 54 | Constructing soak pit 1.20 x 1.20 x 1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design |
| 55 | Grading roof for water proofing treatment complete as required as per direction of the Engineer-in-charge with : (i)Cement concrete 1:2:4 (1 cement : 2 fine sand : 4 graded stone aggregate 20 mm nominal size) |
| 56 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: -Float glass panes of thickness 4 mm |
| 57 | Providingandfixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVCsolventcement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall (i) 15 mm nominal outer dia pipes |
| 58 | (ii) 20 mm nominal outer dia pipes |
| 59 | (iii) 40 mm nominal outer dia pipes |
| 60 | Providing and fitting fixing of C.I. Sluice valve spandle with thread as per direction of the Engineer-in-charge(i) 150 mm dia |
| 61 | Providing and fitting fixing of 1 HP /0.75 KW, 6 to12 mtr. head centrifugal monoblock pump of KIRLOSKAR/CROMPTON/VARUNA/HAVELLS/equivalent make with self priming upto 7.5 m of stainless steel pump shaft, cast iron impeller, cast iron pump casting, with 50 mm dia. suction and 50 mm dia delivery with suitable electrically operated squirrel case (cast iron enclosure) including induction motor of KIRLOSKAR/CROMPTON/VARUNA/HAVELLS/equivalent make single phase, Class “F” insulation, operating in ambient Temp., 50 Hz frequency, 180V-240V,including supplying and fitting fixing of pin bush flexible coupling, MS fabricated base frame, foundation bolts of required size and dia, etc. conforming to IS-325 including making RCC (1:1:5:3) base of required size and shape for fitting fixing of pump with motor and necessary connection with copper wire with power supply main including trial run etc. complete in all respect as per direction of the Engineer-in-charge. |
| 62 | Rewinding of Horizontal Motor suitable for centrifugal pumps by complete dismantling in/c. providing & rewinding with super enamelled copper conductor(as per IS: 13730 Part-3) conductor & all necessary spare parts and reassembling the same including servicing of rotor & necessary trial run as per specification and direction of the Engineer-in-charge. (i) 0.5 - 1.5 HP |
| 63 | Providing and fitting fixing of C.I. Sluice valves(with cap) complete with bolts, nuts, rubber insertions etc.(the tail piece if required will be paid separately) as per CPWD specification and direction of the Engineer-in-charge.(i) 150 mm dia A. PN-1.6 |
| 64 | (ii) 200 mm dia A. PN-1.6 |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
