Improvement To Kanchanpur Walkheda Betawad Road Sh-16 Km 114 / 500 To 118 / 00 Tal. Shindkheda, Dist. Dhule ( Section-Ajande To Betawad )
Tender Value
1.23 Crore
Estimated cost
Bid Submission
14 Oct 2022
0 days left
EMD
1.24 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shindkheda → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Kanchanpur Walkheda Betawad Road Sh-16 Km 114 / 500 To 118 / 00 Tal. Shindkheda, Dist. Dhule ( Section-Ajande To Betawad )
BOQ
| Sl. No. | Item Description |
| 1 | Providing and constructing 50 millimetre thickModifiedPenetration Macadam (MPM) road surface including all materials, preparing the existing road surface, spreading 40 millimetre stone layers metal 100%crusher broken metal with conical crusher palnt, heating and spraying the bitumen of specified grade at 1.75 kilogram per square metre, spreading 12 millimetre size chips compacting with Static roller having weight 8 to 10 Metric Tonne to achive the desired degree of compaction as per Technical Specification Clause 506 etc.complete, including applying tack coat at the rate of 0.30 kilogram per square metre on existing bitumen surface. (Viscocity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 2 | Open Graded Premix Surfacing- Providing and Laying Open Graded Carpet 20 millimetre thickness composed of 13.2 millimetre to 5.6 millimetre aggregates premixed with bituminous binder transported to site with Vertical Tracking System , laid over a previously prepared surface, finished to the required grade, level, alignment, and rolling to achieve the desired compaction but including prime / tack and Seal coat. For Bitumen of specified grade--USING drum mix type hot mix plant with Supervisory Control and Data Acquisition, Paver and Vibratory roller ( Over Modified Penetration Macadam Surface) (Viscocity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 3 | Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of specified gradepreparing existing road surface, heating and applying bitumen at 0.98 Kilogram per square metre by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 Metric Tonne etc. complete. (Viscocity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 4 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 5 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 6 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 7 | Excavation for catch / side water gutter in all sorts of soils to the specified section including stacking the excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 8 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade / colour of 2.5 millimetre thick including 1.5 Refractive index reflectorizing glass beads at 250 gram per square metre. Thickness of 2.5 millimetre is exclusive of surface applied glass beads as per Indian Road Congress 35:2015. Initial Dry reflectivity RL shall be > 250 mcd / square metre / lux measured in the initial 7 day sand sustained reflectivity RL of 100 mcd / square metre / lux and Qd of 100 mcd / square metre / lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to Indian Road Congress 35:2015 clause15.5. The finished surface tobe level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications. (Refer Ministry of Road Transport & Highway Clause 803 fortechnical Specification and Performance for Indian Road Congress 35:2015). |
| 9 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat\"s Eyemade of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 millimetre, 100 millimetre and 102 +/- 2 millimetre and with minimum reflective area of 13 square centimetre on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimetre and height not less than 30+/- 2 millimetre) from the body is to be a minimum value of 500 Kilogram Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 10 | Providing and fixing cautionary / warning sign board of size 60 centimetre having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of Mild steel Angle iron post of size 50 x 50 x 5 millimetre of 3.65 meter long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimetre fixing board and post with 2 Numbers high strength Galvanised Iron bolts and nuts of size 10 millimetre diameter and 20 millimetre long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimetre x 60 centimetre x 75 centimetre size etc.complete. 60 centimetre equilateral triangle Mild steel sheet with Engineering grade, |
| 11 | Providing and fixing Reinforced Cement Concrete 200 metre stones as per Indian Road Congress standard including fixing in standard size Cement Concrete 1:4:8 block including curing, painting lettering etc. complete. |
| 12 | Providing and fixing 1:2:4 oridnary kilometre stones as per Indian Road Congress standard including fixing in standard size Cement Concrete 1:4:8 block including curing, painting lettering etc. complete. |
| 13 | Providing and laying cement concrete pipe of IS 458:2003 NP-2 class of 600mm diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 14 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 meter x 0.90 meter size made out 18 gauge (1.25 millimetre) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on Mild steel angle of size 35 x 35 x 3 millimetre frame with properly cross braced Mild steel angles of size 35 millimetre x 35 millimetre x 3 millimetre duly painted including Two Mild steel angle iron posts of size 65 millimetre x 65 millimetre x 6 millimetre, 3.65 meter long painted with alternate black and white bands of 25 centimetre width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 centimetre x 60 centimetre x 75 centimetre including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender