Improvement To Sahur Zotwade Daul Dondaicha Malpur Karle Parsule Indave Road Mdr-18 Km. 11 / 500 To 17 / 00 Tal. Shindkheda, Dist. Dhule
Tender Value
1.55 Crore
Estimated cost
Bid Submission
14 Oct 2022
0 days left
EMD
1.50 Lakhs
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shindkheda → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Improvement To Sahur Zotwade Daul Dondaicha Malpur Karle Parsule Indave Road Mdr-18 Km. 11 / 500 To 17 / 00 Tal. Shindkheda, Dist. Dhule
BOQ
| Sl. No. | Item Description |
| 1 | Providing earth work in embankment with approved materials obtained from other sources upto lead of 50 meter including all lifts, laying in layers of 20 centimeter. to 30 centimeter. thickness breaking clods, dressing to the required lines, curves, grades & section, watering and compaction with vibratory roller with V-Sat attachment to achieve not less than 97 % of standard proctor density etc. complete( Material obtained from departmental Land) |
| 2 | Watering and compacting of embankment formed of materials obtained from the road cutting within a lead of 50 meter not less than 97 % of standard Proctor density after laying them in layers of 20 centimeter. to 30 centimeter. with vibratory roller. |
| 3 | Labour charges for removing grass, thorney shrubs, Jungli shrub, Kubabul and alike grassalong roadside making the ground clean by showel and phavaras etc. complete. |
| 4 | Dressing of side shoulder / Scrapping the road side shoulder by Mechanical means( By JCB /DOUZER) including excavation of raised side shoulders upto 15 centimeter depth including remooving /cutting bushes,grass and dressing shoulder to desired camber and disposing of excavated stuff up to road boundary etc complete. as directed by Engineer In Charge. |
| 5 | Excavationforcatch/side watergutterinallsortsofsoilsto thespecifiedsectionincluding stackingthe excavated stuff in a regular bund and disposing of unsuitable or excess stuff as directed all sorts of soils. |
| 6 | BITUMINOUSMACADAM:--Providingandlayingbituminousmacadamusingcrushedaggregateof Grading 1, premixed with bituminous binder, transported at site with Viscosity temperature susceptibility (VTS), laid over a previously prepared surface , finished to the required grade ,level, alignment,and rolling to achieve the desired density for 50 millimeter compacted thickness with drum mix type hot mix plant without Supervisory control and data acquisition (SCADA) having complying essential features ofHotmixplantasperIndian Road Congress-272009specifiedconditionsandattachmentssuchaselectronicloadsensor basedbeltconveyers,automaticsynchronizationofbitumenandaggregatefedder,builtindustcontroller systemandProgrammable Logic ControlforDrumMixplant,Sensorpaver,andVibratoryrollerincluding Tackcoat at 2.5 kilogram per 10 square meteretc. complete --Bitumen3.30% of specified grade (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 7 | BITUMINOUS CONCRETE:--Providing and laying bituminous concrete using crushed aggregate of grading 1,premixed with bituminous binder @5.40% by weight of total mix and filler, transported at site with Viscosity temperature susceptibility (VTS), laid over a previously prepared surface, finished to the required grade ,level, alignment, and rolling to achieve the desired density for 30 millimeter compacted thickness with drum mix plant without Supervisory control and data acquisition (SCADA), Sensor paver and Vibratory roller including tack coat on the prepared surface heating by fames in Boiler and spraying bitumen set footed in bitumen boller on Bituminous surface 2.5 kilogram per 10 square meter etc. complete --Bitumen of specified grade with stone dust filler. (Viscosity Grade-30 bulk bitumen rates are considered to arrive at rates) |
| 8 | Supplying hard murum/ kankar at the road site, including conveying and stacking complete. |
| 9 | Spreading hard murum/ soft murrum/ gravel or kankar for side width complete |
| 10 | Compacting the hard murum side widths including laying in layers on each side with vibratory roller including artificial watering etc. complete. |
| 11 | Providing and Laying hot applied thermoplastic road marking strip on Bituminous Surface of specified shade/ colour of 2.5 millimeter thick including 1.5 Refractive index reflectorizing glass beads @ 250 gram per square meter .Thickness of 2.5 millimeter is exclusive of surface applied glass beads as per Indian Road Congress 35:2015. Initial Dry reflectivity RL shall be > 250 mcd/sqm/lux measured in the initial 7 days and sustained reflectivity RL of 100 mcandela per square meter per lux and Qd of 100 mcandela per square meter per lux measured at the end of 2 years by means of a Standard Reflectometer of Zehntner, Easylux, Delta make capable of measuring RL & QD both according to Indian Road Congress 35:2015 clause 15.5. The finished surface to be level, uniform, and free from streaks and holes complete as per direction of Engineer-in-charge and in accordance with applicable specifications.(Refer Ministry of Road Transport and Highways Clause 803 for technical Specification and Performance for Indian Road Congress 35:2015). |
| 12 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat\"s Eyemade of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kilogram tested in accordance to American Society for Testing and materials D 4280 Type H and complying to Specifications of Category A of Ministry of Road Transport and Highways circular No RW/NH/33023/10-97DO III Dt 11.06. 1997. The height, width and length shall not exceed 50 millimeter, 100 millimeter and 102 +/- 2 millimeter and with minimum reflective area of 13 square centimeter on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 millimeter and height not less than 30+/- 2 millimeter) from the body is to be a minimum value of 500 Kilogram. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.The contractor shall submit a two year warrantyfor satisfactory field performance including stipulated retro-reflectance of the reflecting panel, to the Engineer. |
| 13 | Providing and fixing cautionary / warning sign board of size 60 centimeter. having shape of equilateral triangle with apex point upwards. prepared on 16 gauge Mild Steel sheet including painting with one coat of zinc cromate stoving primer and two coats each of white back ground, red border and backside gray stove enamelled, bonded with cut out of Retro reflective sheet Engineering grade, symbol / letters / numerals / border / arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection including one One Number of Mild Steel Angle iron post of size 50 x 50 x 5 millimeter of 3.65 meter long inflated at bottom drilled on top in one piece without joint painted with white and black bands of 30 centimeter. fixing board and post with 2 Number high strength Galvanised Iron bolts and nuts of size 10 millimeter diameter and 20 millimeter long including all taxes, conveying, fixing in ground with cement concrete 1:4:8 block of 60 centimeter x 60 centimeter x 75 centimeter size etc.complete. 60 centimeter. equilateral triangle Mild Steel sheet with Engineering grade, |
| 14 | Providing and laying cement concrete pipe of Indian Standarad 458:2003 NP-2 class of 600 milimeter diameter in proper line, level and slope including providing and fixing collars in cement mortar 1:2 and curing etc. complete. |
| 15 | Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20 meter x 0.90 meter size made out 18 gauge (1.25 milimeter)thickmildsteelsheetpaintedwithonecoatofZincchromatestovingprimerandtwocoatsof enamelpaintonfrontside andgreystove enamelonbackside andborder/messages/symbolsetc.with approved colour shade paint complete, on Mild Steel angle of size 35 x 35 x 3 milimeter frame with properly cross braced Mild Steel angles of size 35 x 35 x 3 milimeter duly painted including Two Mild Steel angle iron posts of size 65 x 65 x 6 milimeter, 3.65 meter long painted with alternate black and white bands of 25 centimeter width including all fixtures etc.andfixingtheboardsin1:4:8concreteblockofsize60centimeterx60centimeterx75centimeterincluding,excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender