Retrofitting Of Water Supply Scheme At. Chincholi Tarfe Akoli Tq. Basmath Dist. Hingoli Under Jal Jeevan Mission
Tender Value
24.80 Lakhs
Estimated cost
Bid Submission
06 Oct 2022
0 days left
EMD
24803
Bank guarantee accepted
Document Fee
3360
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basmath → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Retrofitting Of Water Supply Scheme At. Chincholi Tarfe Akoli Tq. Basmath Dist. Hingoli Under Jal Jeevan Mission
BOQ
| Sl. No. | Item Description |
| 1 | SUBWORK-PUMPING MACHINERY :-Providing and errecting & Giving test of 150mm diasubmerssible Pump sets confirming to IS 8034 and confirming to 9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and Bronze impeller motar suitable for working an 41510% 3pb 50hz A.C supply Cable Guards Thrust carbon / Fibre bearing to accept entire hydraulicwater proof windening shall be provided to pump sets shall be suitable for direct coupling Pump shall have suitable outlet as per manufacturers design antitirust stream lined npn return valve shall be provided with pump suitable suction stainer shall also be provided score single/ double run copper conductor submersible type flat cable 3m & 2 pairs of erection clamps shall be provided along with the pump rates per pump to stages are shall as below. MJP CSR .202021-22 PM 1-2P.No. 2 3.00HP Up To 8 Stege |
| 2 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN -1.0MJP CSR2021-22I.No.1 -a P.No.131 50 mm |
| 3 | Providing and erecting ISI mark G.I. pipe B class in position for suction delivers for centrifugal pump vaccum pump and drop pipe for submersible pump including plumbing with sockets and necessary material.MJP I.No. 1-b-6 Medium P.No. 8250 mm b class medium |
| 4 | Providing and erecting ISI mark B class GI Coupling/Nipple in position with necessary material.MJP M.D. PW-4 P.No. 16 50 mm dia. |
| 5 | Supplying and errecting, flat flexible submersible cable with copper conductor, PVC insulated and PVC sheathed. A64 Core PVC insulated, PVC sheated copper conductor flat subemersible cable.MJPMD CB-2 -2P.No. 823 core2.50 sq mm |
| 6 | Providing and fixing L.T.Skelton panal Board(Rate As per Estiamte attached) Panal Board |
| 7 | Supplying and erecting galvenised cast iron earth plate 60x60x0.6 CM buried in soecifically prepared earth plate 1.5m below ground level 10Kg charcoal and salt in alternate layers necessary length of double GI nut bolts 12mm dia with bituminious compound and through 12mm GI pipe 3m long remaining portion of GI wire from surface of earth plate with gear in PVC pipe up to accessible height duly sealed at both ends by bituminious compound complete connected to the nearest switch gear with end socket as per direction and duly tested by earth tester and recording the results. |
| 8 | SUBWORK-RAISING MAIN:-Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 6 Kg./Sq.cm MJPCSR 2021-22I. No1B P.NO 76 90 MM PVC 6 Kgf/SqM |
| 9 | Providing and supply at. Site of of work PVC/ G.I. Pipes specials suitable for above said pipes incuding cost of taxes, fright charges, octrai, lloading, unloading , conveying to deparmental store etc. complete. |
| 10 | Providing and supplying Air Valves as per IS-10845 and MJP’s standard specifications double orifice type combined with screw down isolating valve, small orifice elastic ball resting on a gun metal orifice nipple, large orifice vulcanite ball seating on moulded seat ring, inlet face and drilled, including all taxes (Central and local), insurance, third party inspection charges, loading, unloding, transportatoin upto departmental stores / site, etc. complete. a) Air Valve Singale Ball Flanged Type - PN -1-6 . MJP CSR2021-22 I.No. 5-b3 P.No. 13625 mm (single boll) |
| 11 | Supplying of CI mechanical joint all socket tees as dimensoinally described in table -18 of IS -13382 / 1992 coplete with ceiling rubber gasket of S.B.R.dimensoinally described in IS 12820/1989 with cast iron follwer gland and M.S. note bolt coated to otherwise protected from rusting and suitable for C.I. pipe.MJP 2021-22 I. No.7 P.No. 14880X80X80 mm dia. |
| 12 | Providing and supplying ISI mark CI D/F reflux valves (non-return valves ) of following dia including all taxes (Central and Local), railway freight, inspection charges unloding from railway wagon, loading into truck, transportation upto departmental stroes/ site, unloading, stacking etc. complete. Reflux valves as per I.S.5312 Part I (1984) Without by pass arrangement - PN -1.0MJP CSR 2021-22I.No.1 -a P.No.13180 mm |
| 13 | Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR 2021-22 I.No. 1P.No. 42 |
| 14 | Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR 2021-22I.No. 3 P.No.42 |
| 15 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 6 and 10 Kg./Sq.cm. MJP CSR 2021-22 I.No. 4b-3 P.No. 80 90 MM PVC 6 Kgf/SqM |
| 16 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete. (for all class of valves). Air Valve DoubleBall (PN-1 and PN - 1.6) MJP CSR 2021-22 I.No. 10 b-6 P.No. 137 25 mm |
| 17 | Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.) MJP CSR I.No. 4 P.No. 13580 mm |
| 18 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) Foundation on Murun and Harder Strata.MJP CSR 2021-22I.NO. 17P.No.140Non B.C. up to 150 mm |
| 19 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.MJPCSR 2021-22 I.No. 15 P.No. 45 |
| 20 | Hydraulic testing of PVC pipes line to specified pressure includingcost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure guage and other necessary equipement, labour, operation charges, etc. required for testing . The rate under this item shall also include cost of resting, if necessary and reinstating to original position.MJP 2021-22I.No.5 P.No. 80 90 MM PVC 6 Kgf/SqM |
| 21 | SUBWORK-G.S.R.:- Designing(aesthetically),and constructingRCCgroundservice reservoirs / RCC sumps in M-300 mix of required capacity including excavation in alltypesofstrata,foundationconcrete, container walls, bottom slab top RCC roof slab/ordome,20mmthickcement plasterwith waterproofing compoundin CM1:3proportiontoinsidefaceofthe container, including epoxy paint from inside including refilling and disposing of surplusstuffwithinleadof50M,all labourandmaterialcharges,forlaying andjointingofpipeassemblyforinlet, outletwashout,overflowandbypass arrangement consisting of C.I. M.S. D/F. pipes, specials and valves of given diameters, providingand fixing accessories such as Stainless steel ladder inside tank and M.S. ladder outside,C.I.Manholeframeandcover, water top slab, B.B. masonry chamber for allvalves,ventilatingshafts,including giving satisfactory hydraulic test and watertightnesstestasperIScodeand providing three coats of Acrylic emulsion with silicom additives paintto all exposedsurfaceofstructureincluding(MJP CSR 2021-22I.NO.1 P.NO.208) 10,000 Lit. |
| 22 | Providing and supplying ISI mark C.I. double flangedpipes excluding GST levied by GOI & GOM in all respect Including all taxes (Central and local) insurance, railway freight, unloading from railway wagon, loading into trucks, transport to departmental stores / site, unloading stacking etc. complete. as directed by Engineer -in-chargeMJPD.S. R. 2021-22I.No.5 P.NO. 72 80 mm |
| 23 | Providing erecting Cast Steel D/F Sluice Valves with jointing to pipe work (including all hardware and packing) water works qualityhaving non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, excluding C. C. foundation / structural steel support. confirming to IS 13095-1991.Sluice valves PN-1-0 MJP CSR2021-22I.NO.2 aP.No. 132 80 mm |
| 24 | Providing and supplying ISI standard C.I. specials including all taxes (Central and local), railway freight, insurance, unloading from railway wagon, loading into truck transport to depermental store site, unloading stacking etc. complete.( MJP CSR2021-22I.NO.6P.No 72) |
| 25 | SUBWORK-DISTRIBUTION SYSTEM:- Excavation for foundation / pipe trenches in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 metres and lifts as below, stacking and spreading as directed, manual dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR2021-22 I.No. 1P.No. 42 |
| 26 | Excavation for foundation / pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatreing, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR2021-22I.No. 3 P.No. 42 |
| 27 | Excavation for foundation / pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete. Lift 0 to 1.5 M MJP CSR2021-22 I.No. 5P.No. 42 |
| 28 | Excavation for foundation / pipe trenches in hard rock and concrete road by chiselling weding lines drilling by machanical means or by any other means other than blasting including trimming and levelling the bed removing the excavated material upto a distance of 50 meters beyond the area and lifts as below stacking as directed by engineer in charge normal dewatering excluding backfilling etc. complete (Bd-A-1/259)MJP I.No. 7 P.No. 36 2007-08. Lift 0 to 1.5 M MJP CSR2021-22I.No. 6 P.No. 43 |
| 29 | Providing and supplying in standard lengths ISI mark rigid unplasticised PVC pipes suitable for potable water with solvent cement joints including cost of couplers, as per IS specification no. 4985 / 1988 including all local and central taxes, transportation, freight charges, inspection charges, loading, unloading, conveyance to the departmental stores / site and stacking the same in closed shed duly protected from sun rays and rains including cost of jointing material i.e. solvemt cement, etc. complete (selffit type to be jointed with cement solvent). Working Pressure 6 Kg./Sq.cm MJPCSR 2021-22 I. No1 aP.NO 76 75 mm PVC |
| 30 | Providing ISI mark G.I. pipe of following class and dia. Including all local and central taxes, octroi, inspection charges, transportation to stores, etc. complete MEDIUM class MJP CSR2021-22 INo 1 B PNo 82 65 mm |
| 31 | Providing and supplying at work site of work PVC/ GI specials suitable for above said pipes including cost of taxes, fright charges, cotroi, loading, unloading conveying to department store. (1-1) P.75 |
| 32 | Lowering, laying and jointing with P.V.C. pipes and specials of following class and diameter including cost of conveyance from stores to site of works including cost of all labour, material, except cement solvent, rubber ring, giving satisfactory hydraulic testing as per IS code, etc. complete (with cement solvent joint / ring fit joint). Working Pressure 6 and 10 Kg./Sq.cm. MJP CSR 2021-22 I.No. 4b-3 P.No. 80 75 MM PVC |
| 33 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, giving satisfactory hydraulic test, etc. complete either underground or in vertical position, as directed by Engineer-in-charge.MEDIUM MJP CSR2021-22I.No. 2 B-8 P.No. 8365 MM |
| 34 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete.MJPCSR 2021-22 I.No. 15 P.No. 45 |
| 35 | Providing erecting Cast Steel D/F Sluice Valves with jointing to pipe work (including all hardware and packing) water works qualityhaving non-rising spindle with hand wheel and without bypass arrangement, spindle of stainless steel as per requirement, excluding C. C. foundation / structural steel support.Sluice Valves PN-1.0MJP CSR 2021-22I.No. 2 a P.No. 13365 MM65 MM |
| 36 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:2:4 proportion PCC bedding, excluding excavation, B.B. masonry in C.M. 1:5 proportion 12 mm thick cement plaster in cm 1:4 proportion on both sides with providing and fixing C.I. manhole frame and cover in RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick slab,etc.complete as directed by Engineer-in-charge. (Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35 M for balance depth exceeding 1.2 M) MJP CSR 2021-22I. NO.1 a P.NO. 220 |
| 37 | Providing and fixing CI Road box including loading unloading and carting to site of work including all necessary excavation in all type of strata and fixing in murum packing etc complete.as directed by Engineer in charge MJP CSR 2021-22 I.no. 5 P.no. 223 225 MM X 300 MM |
| 38 | Providing and laying in situ 1:2:4 ( M-150 ) Grade of c.c. oftrap/ granite/ quartzite/ gneiss/ metal for foundation and bedding including dewatering, formwork, compaction, and curing, finishing Etc. complete. With initial lead of 1.50 M below / above G.L.as per MJP2021-22I.NO. 1(b) P.No. 49 |
| 39 | Lowering, laying and jointing in position following C.I. D/F Reflux valves, Butterfly valves and Sluice valves including cost of all labour jointing material, including nut bolts and giving satisfactory hydraulic testing etc.complete. (Rate for all class of valves.) MJP CSR 2021-22I.No. 4-3 P.No. 13565 MM |
| 40 | Hydraulic testing of PVC pipes line to specified pressure includingcost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able to provide specified test pressure guage and other necessary equipement, labour, operation charges, etc. required for testing . The rate under this item shall also include cost of resting, if necessary and reinstating to original position.MJP 2021-22I.No.5 P.No. 8075 MM DIA. PVC 4 KG/SQ.CM |
| 41 | 65 MM DIA. G.I. |
| 42 | SUBWORK-TAP CONNECTION @ CHINCHOLI T AKOLI:-Providing & fixing house connection and laying in trenches 15 mm dia CPVC pipeincluding necessary excavation fitting Refilling trenches etc. completeincluding removing existing pipe line ifnecessary and conveying , stacking the same and 15 mm dia bob stop tap of PVC Aqua Kraft or as directed by engineer in - Charge.( Retrofitting Work To Be Done AS Proposed Under J.J>M 2020-21 Har Ghar AL SE JALProgam Up To 2024 FHTC Functional House Hold Tap Connection )[Ref:- Government Govt resulation( Marathi)No JJM 2019 / CR -138 /WS10 (07) Date04 /09 /2020](Cost Of 15 mm Service connection for Distribution network of any pipe adoptedas per above resolation )FHTC WITHOUT ROAD CROSSING |
| 43 | FHTC WITH ROAD CROSSING |
| 44 | SUBWORK-TAP CONNECTION @AKOLI:-Providing & fixing house connection and laying in trenches 15 mm dia CPVC pipeincluding necessary excavation fitting Refilling trenches etc. completeincluding removing existing pipe line ifnecessary and conveying , stacking the same and 15 mm dia bob stop tap of PVC Aqua Kraft or as directed by engineer in - Charge.( Retrofitting Work To Be Done AS Proposed Under J.J>M 2020-21 Har Ghar AL SE JALProgam Up To 2024 FHTC Functional House Hold Tap Connection )[Ref:- Government Govt resulation( Marathi)No JJM 2019 / CR -138 /WS10 (07) Date04 /09 /2020](Cost Of 15 mm Service connection for Distribution network of any pipe adoptedas per above resolation )FHTC WITHOUT ROAD CROSSING |
| 45 | FHTC WITH ROAD CROSSING |
| 46 | SUB WORK-INFORMATION BOARD:- Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm)thickmildsteelsheetpaintedwithonecoatofZincchromatestovingprimerandtwocoatsof enamelpaintonfrontside andgreystove enamelonbackside andborder/messages/symbolsetc.with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross bracedM.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.andfixingtheboardsin1:4:8concreteblockofsize60cmx60cmx75cmincluding,excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge As directed by Engineer in charge.PWD SSR 2021-22I.No. 6.36( PWD SSR2021-22I.No.6.36) |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 08, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender