Providing Fhtc Of Lwss Dhartidhar Under Jjm In Gp Nehli Dheera Tehsil Nahan Distt. Sirmour Hp C/O Rcc Storage Tanks 5000 Ltrs Capacity, 2 No And 20000 Ltrs Capacity 1 No At Various Nodes
Tender Value
Ref. Documents
Estimated cost
Bid Submission
07 Oct 2022
0 days left
EMD
6620
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nahan → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Providing Fhtc Of Lwss Dhartidhar Under Jjm In Gp Nehli Dheera Tehsil Nahan Distt. Sirmour Hp C/O Rcc Storage Tanks 5000 Ltrs Capacity, 2 No And 20000 Ltrs Capacity 1 No At Various Nodes
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etc . in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge. |
| 2 | Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 3 | Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.. |
| 4 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 5 | a) Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc.in all thickness. |
| 6 | b) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string sources and the like. |
| 7 | Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforced for reinfoece concrete work in wall(any thickness not less than 0.1m thickness) attahced pillaster buttresses, plinth and string courses etc. from top of foundation level upto floor two level,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.. |
| 8 | Providing and laying reinforced cement concrete work 1:2:4(1cement:2app.sand: 4app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs, landings shelves and their supports balconies beams,girders bressumers and cantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 9 | Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires. |
| 10 | Providing and fixing MS ( man holes cover )with locking arrangement ( Light duty single seal pattern 500mm internal dia total weight of cover not less than 23 Kg I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
| 11 | Steel work welded in built up sections and framed work including cutting,hoisting,fixing in position and applying a priming coat of red lead paint. (a) In gratings, framed guard, bars, ladders, raillings, brackets and similar works including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge. |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 07, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 07, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender