Military Engineer Services-MES has published Ge / U ( N ) -48 / 2022-23 : Repair To Flooring Brick Work Joineries Sanitary Fitting And Repair To Security Wall Gates Drains Path Way At Asc Fpd Ddgsi Weu Ashok Vihar Sa Officer Mess Asc Engr Regt Cdu And Krimchi Md Accnunder Ge ( N ) Udhampur. Submission Date for this Tender is 20-10-2022. Drainage Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | M&L for excavation in trenches, n exc 1.5m wide & nexc 1.5 M deep in any type of soil complete all as specified and directed by Engr in charge. |
| 2 | M&L for excavation in post holes (or similar holes) each not exceeding 0.5 cum, in any type soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soilcomplete all as specified and directed by Engr in charge. |
| 3 | M&L for taking down cement plaster any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr in charge. |
| 4 | M&L for rendering 15mm thick on fair faces of brick/concrete surfaces in cement mortar 1:4, with water proofing compound (WPC shall be measured separately)complete all as specified and directed by Engr in charge. |
| 5 | M&L for rendering 5 mm thick in cm 1:3 on ceiling finished even & smooth W/O using extra cement complete all as specified and directed by Engr in charge. |
| 6 | M&L for cement plaster 15mm thick on fair faces of brick/conc surfaces of walls in cement mortar 1:4 finished fair and even complete all as specified and directed by Engr in charge. |
| 7 | M&L for rendering 10mm thick on brick or concrete surface as in chaja/facia in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified and directed by Engr in charge. |
| 8 | M&L for brick work with sub class "B" bricks st or curved or plain with cement mortar 1:6 complete all as specified and directed by Engr in charge. |
| 9 | Allas per srlitem No 08 above but except brick complete all as specified and directed by Engr in charge. |
| 10 | M&L for walingof random rubblemasonrybuilt in cement motar 1:6, uncoursed, wellbounded, bedded and solidly hearted complete, complete all as specified and directed by Engr in charge. |
| 11 | All as per srl item no 10 above but except stones. |
| 12 | M&L for demolition of brick work or stone masonry built in cement mortor including all quoines aches pillar etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engr in charge. |
| 13 | Supply only integral water proofing compound complete all as specified and directed by Engr in charge. |
| 14 | M&L fortwo coat of white wash on new plastered wall surfaces including preparation of surface complete all as specified and directed by Engr in charge. |
| 15 | M&L for two coat of Oil bound distemper over a coat of primer over 2to 3mm thick wall care putty including preparation of newly plastered surfaces of wall complete all as specified and directed by Engr in charge. |
| 16 | M&L for two coat of cement base paint over a coat of cement primer including preparation of newly plastered surfaces of wall complete all as specified and directed by Engr in charge. |
| 17 | M&L for demolition of concrete in ground floor and paving n.exc15 cm thickness below or G.L complete all as specified and directed by Engr in charge. |
| 18 | M&L for providing 50 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection even and smooth without using extra cement complete all as specified and directed by Engr in charge. |
| 19 | M&L for providing 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in flooring/subbase finished even & rough without using extra cement complete all as specified and directed by Engr in charge. |
| 20 | M&L for 25mm thick cement concrete 1:2:4 type B-0 using 12.5mm graded crushed stone aggregates as in floor and finished even and rough to receive tiles without using extra cement complete all as specified and directed by Engr in charge. |
| 21 | M&L for providing 75 mm thick cement concrete 1:2:4 type B-2 using 40mm graded crushed stone aggregates as in flooring/subbase finished even & smooth without using extra cement complete all as specified and directed by Engr in charge. |
| 22 | M& L for providing 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate finished even and smooth w/o using extra cement complete all as specified and directed by Engr in charge. |
| 23 | S & F 3mm glass dividing strips, 38mm wide complete all as specified and directed by Engr in charge. |
| 24 | M&L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including laying over 20mm thick screed in cement mortar 1:4 complete all as specified and directed by Engr in charge. |
| 25 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar jointed with ditto as per item above & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr in charge. |
| 26 | M&L for granite (of any type) 18 mm to 20 mm thk work (table rubbed & polished) as in steps, jambs, pillars, window cills, cooking platforms and like ,machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over & incl 20 mm thk screed bed in CM 1:4complete all as specified and directed by Engr in charge. |
| 27 | M&L for Marble slab (of any type & any shade) as in shelves, cooking platforms etc, bedded jointed and pointed with white cement sturry including cutting & polishing, 15 mm to 18 mm thickness laid over & incl 20 mm thk Screed bed in CM 1:4complete all as specified and directed by Engr in charge.. |
| 28 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ractangular) area of each tiles exceeding 0.11 Sqm but n.exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in colouredcement to match the surface laid over & incl 10 mm thk screed bed in CM 1:4 completecomplete all as specified and directed by Engr in charge. |
| 29 | Ditto all as per srlitem no 28 above but on skirting over vertical surfaces& including 10 mm thick cement mortar 1:3 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr in charge. |
| 30 | M&L for light shade vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile notexceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry & pointed with grout of matching shade, complete, complete all as specified and directed by Engr in charge. |
| 31 | Ditto all as per srl item no 30 above but as in skirting over vertical surfaces& including 10 mm thick cement mortar 1:3 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr in charge. |
| 32 | M&L forglazed ceramic colouredtiles 300X200X7mm thk as in skirting over vertical surfaces& including 10 mm thick cement mortar 1:4 screed, set and jointed with grey cement slurry and pointed in grout of matching shade of tiles complete all as specified and directed by Engr in charge. |
| 33 | M&L for 450mm x 300mm x 7 mm thick first quality colouredglazedceramic tiles as in skirting/dadoincluding 10 mm thick cement mortar 1:4 screed, set and jointed in neat cement slurry and pointed incoloured cement to match the surface completecomplete all as specified and directed by Engr in charge. |
| 34 | M&L for dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed by Engr in charge. |
| 35 | M&L for60mm thick machine pressedinterlocking paver blocks of any shape and size with M-35 design Mix concrete of anyapproved colour using grey cement and pigment (conforming to IS 15658-2006) over 50mm thick sand cushion complete all as specified and directed by Engr in charge. |
| 36 | M&L for machine pressed concrete interlocking paver block glossy finish, any shape and size confirming to IS 15658-2006 of 80mm thickness, M-35 grade with grey cement and pigment over 50mm thick sand cushion complete all as specified and directed by Engr in charge. |
| 37 | M & L for providing Chequred cement concrete tiles 25cm x 25cm x22 mm thick tiles set , jointed and pointed in neat cement slurry in floors with grey cement ant pigment laid over & incl 20 mm thk screed bed in CM 1:4complete all as specified and directed by Engr in charge. |
| 38 | S&F vitreous china squatting pan ‘Orissa’pattern size 580X440mm , white with integral foot rest (Excludingflushing system and flush pipe) with ‘P’ or ‘S’trapcomplete all as specified and directed by Engr in charge. |
| 39 | S&F PVC valve less symphonic action type flushing cistern low level white inlet, ball valve, float and handle including brackets., Flush pipe and PVC connection, capacity of tank 10 Ltrcomplete all as in repairs complete all as specified and directed by Engr in charge. |
| 40 | S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) includingconnection to drain and flush pipe, fixed in repaircomplete, complete all as specified and directed by Engr in charge. |
| 41 | S&F plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, fixed in repair, complete allcomplete all as specified and directed by Engr in charge. |
| 42 | S&F cast copper alloy, chromium plated hand shower (health faucet) with 8 mm dia, 1.00 metre long flexible tube and wall hook, IN REPAIR, complete all as specified and directed by Engr in charge. |
| 43 | S&F in repairsVitreous china wash hand basin white flat back size 580x450mm including waste chain and plug and porcelain stopper but inclbracket CP waste coupling & waste pipe fixed in repair complete all as specified and directed by Engr in charge. |
| 44 | S&F in repairs bib taps fancy type ,cast copper alloy,long body chromium platedwith crutch or butterfly handle screwed down for iron pipe or for brass ferrule and fixed for bore of pipe 15 mm completecomplete all as specified and directed by Engr in charge. |
| 45 | S&F in repairs angle valve/ Stop valve, fancy type, chromium plated,( concealed with adjustable wall flange), cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15mm bore and fixed in repairs,complete all as specified and directed by Engr in charge. |
| 46 | S&F in repair pillar tap , cast copper alloy, fancy typewith capstan heads , chromium plated , screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mmcomplete all as specified and directed by Engr in charge. |
| 47 | S&F in taking up or down steel tubing and connections, including cleaning for refixing or removal to store 15mm dia.complete all as specified and directed by Engr in charge. |
| 48 | S&F Steel water tubing medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors of 15mm bore complete all as specified and directed by Engr in charge. |
| 49 | Fixing only steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm, complete all as specified and directed by Engr in charge. |
| 50 | S&F PVC connection 15mm size with PTMT nuts of length 450 mm, fixed in repaircomplete all as specified and directed by Engr in charge. |
| 51 | S&F in repairs Bevelled edge looking mirror size 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cupwasherscomplete all as specified and directed by Engr in charge. |
| 52 | S&F 450 mm dia Reinforced concrete pipes, class NP2 laid and jointed complete with collars complete all as specified and directed by Engr in charge. |
| 53 | S&F in concrete bed to drain pipes inclpacking under completely and completely surrounding the pipes with concrete after they are laid and tested in cement concerete type 1:3:6 C2 complete all as specified and directed by Engr in charge. |
| 54 | S&F PVC (SWR) pipe 110mm dia single socket in any length with rubber ring joints fixed to wall / floor including PVC clamps complete all as specified and directed by Engr in charge. |
| 55 | M&L plain cement concrete 1:2:4 type B-1 using 20mm graded aggregate as in coping. Kneelers, bed block including necessary from work complete all as specified and directed by Engr in charge. |
| 56 | M&L for plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in foudation for fencing post filling, and mass concrete, completecomplete all as specified and directed by Engr in charge. |
| 57 | M&L for plain cement concrete in foundationfilling & mass concrete 1:4:8 E-2 (40mm graded stone aggregate) complete all as specified and directed by Engr in charge. |
| 58 | M&L for plain cement concrete 1:2:4, B-1 (20mm graded stone aggregate) as in surface channels and drains etc completecomplete all as specified and directed by Engr in charge. |
| 59 | M&L for demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided forcomplete all as specified and directed by Engr in charge. |
| 60 | M&L for providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb stone and similar work, bedded and jointed in CM 1:6 complete all as specified and directed by Engr in charge. |
| 61 | M&L forreinforced cement concrete M-25 type B1 1:2:4 design mix (using 20 mm graded stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed by Engr in charge. |
| 62 | M&L for reinforced cement concrete M-25 type B1 1:2:4 design mix (using 20 mm graded stone aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15 mm th plastering with water proofing compound as directedlaid/made to slope as in RCC roof surfaces complete all as specified & directed by Engr-in-Charge. |
| 63 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping)complete all as specified and directed by Engr in charge. |
| 64 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm widecomplete all as specified and directed by Engr in charge. |
| 65 | M&L for providingprecast cement concrete 1:2:4, type B0, using 12.5mm graded stone aggregatelouvers & jallies, 25mm thick (measured solid), set in cement mortar 1:4, including all mouldings but excluding frame complete all as specified and directed by Engr in charge. |
| 66 | M&L for taking down chowkat or framed with shutter (without taking off shutter fromthe frames) not exceeding 1..5 Sqm each. complete all as specified and directed by Engr in charge. |
| 67 | M&L for taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1..5 Sqn but n.exc 4 Sqm each complete all as specified and directed by Engr in charge. |
| 68 | M&L for taking downshutters of any description areaexc 1 sqm and n. exc 2 sqm each complete all as specified and directed by Engr in charge. |
| 69 | Refixing of shutters of any description areaexc 1 sqm and n. exc 2 sqm each in same opening complete all as specified and directed by Engr in charge. |
| 70 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, complete all as specified and directed by Engr in charge. |
| 71 | M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, complete all as specified and directed by Engr in charge. |
| 72 | Supply and fixing factory made steel windows (Box type hinge) without glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primer, complete all as specified and directed by Engr in charge. |
| 73 | Supply and fixing factory made steel windows (Box type hinge) with glazing bars, dovetailed or welded including hinges, steel handles, steel peg stays etc including one shop coat of red oxide zinc chrome primercomplete all as specified and directed by Engr in charge. |
| 74 | M&L for mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed by Engr in charge. |
| 75 | M&L for mild steel bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clipscomplete all as specified and directed by Engr in charge. |
| 76 | M&L for framed work such as grills, gratings doors gates etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; susset plates framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr in charge. |
| 77 | M&L for dismantling of wrought iron or mild steel workof any decription not otherwise provided forcomplete all as specified and directed by Engr in charge. by Engr-in-Charge. |
| 78 | S&F mild steel work as in posts & struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc & similar work convirming to Fe 290 Gde E-165 complete all as specified and directed by Engr in charge. |
| 79 | Fixing only mild steel work as in posts & struts in fencing including cutting tops to shape as directed drilling holes, notching for wire etc & similar work convirming to Fe 290 Gde E-165 complete all as specified and directed by Engr in charge. |
| 80 | S&F as in repairs galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm, spacings & straining & fixing to any type of standard rails, straining, bolts, including securing or tying at crossings with & provision of galvanised mild steel wire, staples or steeel pins etccomplete all as specified and directed by Engr in charge. (each line of wire to be measured) |
| 81 | S&F in repair of galvanised concertinacoil 900 mm dia ,using 3 Nos GI clips per coil, complete all as specified and directed by Engr in charge. |
| 82 | Supply only Chain link MS galvanisd fencing, any size or typecomplete all as specified and directed by Engr in charge. |
| 83 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wireonlycomplete all as specified and directed by Engr in charge. |
| 84 | M&L for holes drilled up to 12mm dia (and countersunk, if required) depth of holes exc 3mm but nexc 12mmcomplete all as specified and directed by Engr in charge. |
| 85 | M&L for 35 mm th factory made 2nd class hard wood rail and style, plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treatedcompletecomplete all as specified and directed by Engr in charge. |
| 86 | S&F 35mm thick 2nd class hard wood Glazed and skeleton shutters open rebated & prepare to receive glass, gauge etc (without sash bars /edges of framing plain chamfered or rounded, fitted with cut and mitred beds for securingglass etc) size of members of shutters as spd in SSR Part-I section-8 clause 8.2 (A). complete all as specified and directed by Engr in charge. |
| 87 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed by Engr in charge. |
| 88 | M&L for preparation of new woodensurfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified and directed by Engr in charge. |
| 89 | M&L for preparation of new iron surfacesexceeding 10 cms width or girth and applying two coats of synthetic enamel paintoveronecoat of pinkprimer complete all as specified and directed by Engr in charge. |
| 90 | M&L for providing cement concrete 1:3:6 type C-0 using 12.5mm graded crushed stone aggregates for filling in the pressed steel door frame/hold fast complete all as specified and directed by Engr in charge. |
| 91 | S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheetreinforced with mild steel square tube, supplying and fixing in opening as per specification and as directed by the Engr in Charge. |
| 92 | S&F factory made solid pannel PVC door shutter 30 mm thick ( style) consisting of frame made out of M S tubes for top and bottom rails. M Sframe shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheetstrip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement , supplying and fixing in the frame at site as per specification and drawing , complete all as specified in SSR and as directed. |
| 93 | S&Fmild steel cold rolled butt hinges mediumweight 100 mm long complete all as specified and directed by Engr in charge. |
| 94 | S&Fmild steel cold rolled butt hinges mediumweight 75 mm long complete all as specified and directed by Engr in charge. |
| 95 | S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr in charge. |
| 96 | S & F100mmmild steel barrel tower blots, stove enamelled black, with bright bolt and fixedcomplete all as specified and directed by Engr in charge. |
| 97 | S & F 150 mm long extruded aluminium ally handles, fabricated type., anodised complete all as specified and directed by Engr in charge. |
| 98 | M&L for 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed by Engr in charge. |
| 99 | S&F mild steel, 300 mm, helical door spring including roller and roller plate complete fixed to wooden or steel door frame by nail or welding (which ever is feasible) etc, complete all as specified and directed by Engr in charge. |
| 100 | S&F powder coated anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed by Engr in charge. |
| 101 | S&F powder coated anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing,anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and directed by Engr in charge. |
| 102 | S&F powder coated anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr in charge. |
| 103 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed by Engr in charge. |
| 104 | M&L for dismantling wall and ceiling boards, fibre pulp insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets,complete all as specified and directed by Engr in charge. |
| 105 | S&F non asbestos fibre Cement board ceiling 4mm, thick in 600x600mm panel designed ceiling conforming to IS-14862 type B category threeincl snapgrid frame work, hold fast, suspenders complete all as specified and directed by Engr in charge. |
| 106 | M&Lfor 4mm thick non AC board fixed with screw complete all as specified and directed by Engr in charge. |
| 107 | M&Lfor hacking out old broken glass any thickness, size quality from wooden frame or steel frame glazed with putty or fixed with beads complete all as specified and directed by Engr in charge. |
| 108 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed by Engr in charge. |
| 109 | S&F4 mm thick figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane complete all as specified and directed by Engr in charge. |
| 110 | M&Lfor steel rolling shutters of lath thickness 1.00 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete; gear operated type with bevel gear box and crank handle complete all as specified and directed by Engr in charge. |
| 111 | M&Lfor dismantling asbestos cement (corrugated, semicorrugated, etc) sheets in roof coverings complete all as specified and directed by Engr in charge. |
| 112 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in charge. |
| 113 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr in charge. |
| 114 | S&F Rotational moulded PVC water tanks of Cap 1000 Ltrs cylindrical verticle with closed top hoisted and fixed in position all as spd in SSR Part incl fixing of 20mm PTMT float valve medium grade & dismantaling of existing unserviceable water tanks and removal from site complete all as specified and directed by Engr in charge. |
| 115 | S&F Rotational moulded PVC water tanks of Cap 500 Ltrs cylindrical verticle with closed top hoisted and fixed in position all as spd in SSR Part incl fixing of 20mm PTMT float valve medium grade & dismantaling of existing unserviceable water tanks and removal from site complete all as specified and directed by Engr in charge. |
| 116 | M&Lfor safety lever locks mild steel with 4 leavers for rolling shutters complete all as specified and directed by Engr in charge. |
| 117 | M&Lfor ball bearing for rolling shutters in repairscomplete all as specified and directed by Engr in charge. |
| 118 | S&F in repair rigid non - metalic PVC casing caping of 25/12mm inclusive of all elbow, tees,etc complete all as per the direction of Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
