Public Administrative Department Local Bodies Closing in 0 days TDR #34156175

Tender For Purchase Of Instrument Of Materials Testing Lab

Issued by Local Bodies · 24 Paraganas North, West Bengal
Tender Value
4.98 Lakhs
Estimated cost
Bid Submission
18 Oct 2022
0 days left
EMD
9962
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
24 Paraganas North → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Purchase Of Instrument Of Materials Testing Lab , Compressive Strength Testing Machine Electrically Operated ( Digital ) , Capacity: 1000 Kn.Least Count: 1 Kn. Accuracy + / - 1 % Of The Applied Load Conforming To Is 14858:2000. ( Hand Operated , Vicat Apparatus Conforming To Is : 5513-1996 , Gauging Trowels 10 Nos , Pycnometer Conforming To Is: 2386 ( Part Iii ) -1963 , Le Chateliars Flask Conforming To Is : 4031 ( Part 3 ) - 1988 , Blaines Air Permeability Apparatus With Accessories Conforming To Is: 5516 , Concrete Core Cutter Machine ( As Per Relevant Is Code ) , Accelerated Curing Tank , Electronic Weighing Balance ( Digital ) , Capacity 5 Kg, Sensitivity 500 Mg. Calibrated. Pan Siz 12 Inch X 12 Inch , Thermostatically Controlled Hot Air Oven With Digital Indicator & Blower 300X300x300 Mm . Inside Chamber Made With Stainless Steel. Capacity: Ambient To 250 Degree Celcius. Temperature Accuracy + / - 1 Degree Celcius , 4 Nos.Metal Tray Of Size Larger Than 650 Cm2 / 12 Inch X 12 Inch / 12 Inch X 18 Inch , Thermometer 0 To 350° C , Sensitivity 0.1° C. , Penetration Testing Apparatus Of Bitumen With Container, Needle, Stop Watch, Water Bath With Thermostat, Thermometer As Specified In Is: 1203-1978 , Cleveland Flash & Fire Point Tester / Pensky-Martens Closed Tester Consist Of Cup, Lid, Stirrer Device, Shutter, Flame Exposure Device & All The Apparatus Conforming To Is:1209-1978 , Ring & Ball Apparatus, Steel Balls ( 2 Nos. ) , Brass Rings ( 2 Nos. ) And All The Apparatus As Specified In Is: 1205:1978 To Determine The Softening Point Of Bitumen , Casagrande Apparatus Confirming To Is: 9259-1979 & Other Apparatus Required Todetermine The Liquid Limit & Plastic Limit As Specified In Is: 2720 ( Part-5 ) 1985. , Cylindrical Metal Mould ( For Standard & Modified Proctor Test ) With 2.5 Kg & 4.5 Kg Rammer And All The Required Apparatus To Determine Optimal Moisture Content Of Soil For Proctor Conforming To Is 2720-7 & Is 2720-8 , Standard Penetration Test Apparatus Of Soil Conforming To Is: 2131 ( 1981 ) , Digital Moisture Meter ( Hand Held ) , Polycarbonate Beakers ( 50 Ml ) 5 Nos. , Polycarbonate Beakers ( 100 Ml ) 5 Nos. , Metal Tray 12X12 2 Nos. & 12X18 2 Nos , Hydrometer Conforming To Is : 2720 ( Part 4 ) - 1985 , Specific Gravity Bottle ( 100 Ml ) 4 Nos. , Digital Turbidity Meter ( Table Top Type ) Conforming To Is : 3025 ( Part 10 ) - 1984 , Digital Conductivity Meter Conforming To Is : 3025 ( Part 14 ) - 1984 , Digital Tds Meter Conforming To Is 3025 ( Part 16 ) : 1984 , Digital Do Meter Conforming To Is 3025 ( Part 38 ) : 1989 , Drinking Waterfield Testing Kit To Determine Turbidity, Total Hardness, Arsenic, Dissolved Oxygen. , Cylindrical Metal Measure With Handle For Determination Of Bulk Density Of Aggregates, Capacity- 3, 15, 30 Litres And Tamping Rod Of 16 Mm Dia & 60 Cm Long , Aggregate Impact Testing Machine With All The Apparatus Specified In Is: 2386 ( 4 ) , Metal Flakiness Gauge To Determine Flakiness Index Of Coarse Aggregate Conforming To Is:2386 ( Part I ) -1963 , Metal Gauge To Determine Elongation Index Of Coarse Aggregate Conforming To Is:2386 ( Part I ) -1963 , Los Angeles Abrasion Testing Machine Conforming To Is: 10070-1982 With All The Apparatus Specified In Is: 2386 ( 4 ) , Aggregate Crushing Value Determination Apparatus With All The Accessories Specified In Is: 2386 ( 4 ) , Laboratory California Bearing Ratio ( Cbr ) Test Apparatus With All The Accessories Specified In Is 2720-16 ( 1987 ) With Cbr Mould And Its Accessories Conforming To Is 9669 ( 1980 ) , Three Speed Or Four Speed Motor, Ms Mould , Set Of Is Sieves Mentioned In Table I Of Is: 2386 Part-I - 1963 Conforming To Is : 460-1962 With Pan & Lid Gi-75, 63, 53, 45, 37.5, 31.5, 26.5, 22.4, 13.2, 4.75, 10, With Pan & 36 37 Lid Brass- 4.7, 2.36, 2.00, 1.18, 1.00 Mm, 75, 600, 300, 150 Micron Lid & Pan , Mechanical Sieve Shaker ( Table Top Type ) , 5 Nos. Of Dry Cloth Larger Than 750 Mm X 450 Mm

BOQ

Name of Work: Purchase of Instrument of Material Testing Laboratory
Sl. No. Item Description
1Compressive strength testing machine electrically operated (digital), capacity: 1000 KN.Least count: 1 KN. Accuracy +/- 1 % of the applied load conforming to IS 14858:2000. (HAND OPERATED
2Vicat apparatus conforming to IS : 5513-1996
3Gauging Trowels 10 nos
4Pycnometer conforming to IS: 2386 (Part III)-1963
5Le chateliar\"s flask conforming to IS : 4031 ( Part 3) - 1988
6Blaine\"s Air Permeability apparatus with accessories conforming to IS: 5516
7Concrete core cutter machine(As per relevant IS code)
8Accelerated curing tank
9Electronic Weighing Balance (digital), capacity 5 KG, Sensitivity 500 mg. Calibrated. Pan siz 12 inch x 12 inch
10Thermostatically controlled Hot air oven with Digital Indicator & Blower 300x300x300 mm . Inside chamber made with stainless steel. Capacity: ambient to 250 degree celcius. Temperature accuracy +/- 1 degree Celcius
114 nos.Metal Tray of size larger than 650 cm2/ 12 inch x 12 inch/ 12 inch x 18 inch
12Thermometer 0 to 350° C , sensitivity 0.1° C.
13Penetration testing apparatus of bitumen with container, needle, stop watch, water bath with thermostat, thermometer as specified in IS: 1203-1978
14Cleveland flash & fire point tester/ Pensky-martens closed tester consist of cup, lid, stirrer device, shutter, flame exposure device & all the apparatus conforming to IS:1209-1978
15Ring & ball apparatus,steel balls(2 nos.), Brass rings (2 nos.) and all the apparatus as specified in IS: 1205:1978 to determine the Softening point of bitumen
16Casagrande apparatus confirming to IS: 9259-1979 & other apparatus required todetermine the Liquid limit & Plastic limit as specified in IS: 2720 (Part-5) 1985.
17Cylindrical metal mould (for standard & modified proctor test) with 2.5 kg & 4.5 kg rammer and all the required apparatus to determine optimal moisture content of soil for proctor conforming to IS 2720-7 & IS 2720-8
18Standard penetration test apparatus of soil conforming to IS: 2131 (1981)
19Digital Moisture Meter (Hand held)
20Polycarbonate Beakers(50 ml) 5 Nos.
21Polycarbonate Beakers(100 ml) 5 Nos.
22Metal Tray 12\"x12\" 2 Nos. & 12\"x18\" 2 Nos
23Hydrometer conforming to IS : 2720 ( Part 4 ) - 1985
24Specific Gravity bottle (100 ml) 4 Nos.
25Digital Turbidity meter (Table top type) conforming to IS : 3025 ( Part 10) - 1984
26Digital conductivity meter conforming to IS : 3025 (Part 14) - 1984
27Digital TDS meter conforming to IS 3025 (PART 16) : 1984
28Digital DO meter conforming to IS 3025 ( Part 38 ) : 1989
29Drinking waterfield testing kit to determine Turbidity, Total hardness, Arsenic, Dissolved oxygen.
30Cylindrical Metal measure with handle for determination of Bulk Density of Aggregates, Capacity- 3,15,30 litres and tamping rod of 16 mm dia & 60 cm long
31Aggregate Impact testing machine with all the apparatus specified in IS: 2386(4)
32Metal Flakiness Gauge to determine Flakiness Index of Coarse Aggregate conforming to IS:2386(Part I)-1963
33Metal Gauge to determine Elongation Index of Coarse Aggregate conforming to IS:2386(Part I)-1963
34Los Angeles abrasion testing machine conforming to IS: 10070-1982 with all the apparatus specified in IS: 2386 (4)
35Aggregate crushing value determination apparatus with all the accessories specified in IS: 2386(4)
36Laboratory California Bearing Ratio (CBR) test apparatus with all the accessories specified in IS 2720-16 (1987) with CBR mould and it\"s accessories conforming to IS 9669 (1980), Three speed or four speed motor, MS mould
37Set of IS Sieves mentioned in Table I of IS: 2386 part-I - 1963 conforming to IS : 460-1962 with Pan & Lid GI-75,63,53,45,37.5,31.5,26.5,22.4,13.2,4.75,10, with Pan & 36 37 Lid BRASS- 4.7,2.36,2.00,1.18,1.00 MM, 75, 600,300,150 Micron LID & PAN
38Mechanical sieve shaker (table top type)
395 nos. of dry cloth larger than 750 mm x 450 mm

AI Tender Summary

OUR REF NO 34156175
AUTHORITY Local Bodies
TENDER VALUE 4.98 Lakhs
LAST DATE 18-10-2022
Authority
Authority Name Zilla Parishad
Work Description Purchase Of Instrument Of Materials Testing Lab , Compressive Strength Testing Machine Electrically Operated ( Digital ) , Capacity: 1000 Kn.Least Count: 1 Kn. Accuracy + / - 1 % Of The Applied Load Conforming To Is 14858:2000. ( Hand Operated , Vicat Apparatus Conforming To Is : 5513-1996 , Gauging Trowels 10 Nos , Pycnometer Conforming To Is: 2386 ( Part Iii ) -1963 , Le Chateliars Flask Conforming To Is : 4031 ( Part 3 ) - 1988 , Blaines Air Permeability Apparatus With Accessories Conforming To Is: 5516 , Concrete Core Cutter Machine ( As Per Relevant Is Code ) , Accelerated Curing Tank , Electronic Weighing Balance ( Digital ) , Capacity 5 Kg, Sensitivity 500 Mg. Calibrated. Pan Siz 12 Inch X 12 Inch , Thermostatically Controlled Hot Air Oven With Digital Indicator & Blower 300X300x300 Mm . Inside Chamber Made With Stainless Steel. Capacity: Ambient To 250 Degree Celcius. Temperature Accuracy + / - 1 Degree Celcius , 4 Nos.Metal Tray Of Size Larger Than 650 Cm2 / 12 Inch X 12 Inch / 12 Inch X 18 Inch , Thermometer 0 To 350° C , Sensitivity 0.1° C. , Penetration Testing Apparatus Of Bitumen With Container, Needle, Stop Watch, Water Bath With Thermostat, Thermometer As Specified In Is: 1203-1978 , Cleveland Flash & Fire Point Tester / Pensky-Martens Closed Tester Consist Of Cup, Lid, Stirrer Device, Shutter, Flame Exposure Device & All The Apparatus Conforming To Is:1209-1978 , Ring & Ball Apparatus, Steel Balls ( 2 Nos. ) , Brass Rings ( 2 Nos. ) And All The Apparatus As Specified In Is: 1205:1978 To Determine The Softening Point Of Bitumen , Casagrande Apparatus Confirming To Is: 9259-1979 & Other Apparatus Required Todetermine The Liquid Limit & Plastic Limit As Specified In Is: 2720 ( Part-5 ) 1985. , Cylindrical Metal Mould ( For Standard & Modified Proctor Test ) With 2.5 Kg & 4.5 Kg Rammer And All The Required Apparatus To Determine Optimal Moisture Content Of Soil For Proctor Conforming To Is 2720-7 & Is 2720-8 , Standard Penetration Test Apparatus Of Soil Conforming To Is: 2131 ( 1981 ) , Digital Moisture Meter ( Hand Held ) , Polycarbonate Beakers ( 50 Ml ) 5 Nos. , Polycarbonate Beakers ( 100 Ml ) 5 Nos. , Metal Tray 12X12 2 Nos. & 12X18 2 Nos , Hydrometer Conforming To Is : 2720 ( Part 4 ) - 1985 , Specific Gravity Bottle ( 100 Ml ) 4 Nos. , Digital Turbidity Meter ( Table Top Type ) Conforming To Is : 3025 ( Part 10 ) - 1984 , Digital Conductivity Meter Conforming To Is : 3025 ( Part 14 ) - 1984 , Digital Tds Meter Conforming To Is 3025 ( Part 16 ) : 1984 , Digital Do Meter Conforming To Is 3025 ( Part 38 ) : 1989 , Drinking Waterfield Testing Kit To Determine Turbidity, Total Hardness, Arsenic, Dissolved Oxygen. , Cylindrical Metal Measure With Handle For Determination Of Bulk Density Of Aggregates, Capacity- 3, 15, 30 Litres And Tamping Rod Of 16 Mm Dia & 60 Cm Long , Aggregate Impact Testing Machine With All The Apparatus Specified In Is: 2386 ( 4 ) , Metal Flakiness Gauge To Determine Flakiness Index Of Coarse Aggregate Conforming To Is:2386 ( Part I ) -1963 , Metal Gauge To Determine Elongation Index Of Coarse Aggregate Conforming To Is:2386 ( Part I ) -1963 , Los Angeles Abrasion Testing Machine Conforming To Is: 10070-1982 With All The Apparatus Specified In Is: 2386 ( 4 ) , Aggregate Crushing Value Determination Apparatus With All The Accessories Specified In Is: 2386 ( 4 ) , Laboratory California Bearing Ratio ( Cbr ) Test Apparatus With All The Accessories Specified In Is 2720-16 ( 1987 ) With Cbr Mould And Its Accessories Conforming To Is 9669 ( 1980 ) , Three Speed Or Four Speed Motor, Ms Mould , Set Of Is Sieves Mentioned In Table I Of Is: 2386 Part-I - 1963 Conforming To Is : 460-1962 With Pan & Lid Gi-75, 63, 53, 45, 37.5, 31.5, 26.5, 22.4, 13.2, 4.75, 10, With Pan & 36 37 Lid Brass- 4.7, 2.36, 2.00, 1.18, 1.00 Mm, 75, 600, 300, 150 Micron Lid & Pan , Mechanical Sieve Shaker ( Table Top Type ) , 5 Nos. Of Dry Cloth Larger Than 750 Mm X 450 Mm
Basic Detail
Tender No 878/MPGP/15THFC/2022
Bidding Type Tender
Location
City 24 Paraganas North
State West Bengal
Key Dates
Publish Date 29 Sep 2022
Submission Date 18 Oct 2022
Open Date 20 Oct 2022
Finance
Tender Value 4.98 Lakhs
Tender Fee Ref. Documents
EMD 9962
Exemption Not Available
Document List
7599d2da-2142-4a0e-832a-68be917bba3f.html
BOQ_811685.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 29, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 18, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 20, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

7599d2da-2142-4a0e-832a-68be917bba3f.html

xls

BOQ_811685.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders