Estimate Towards The Cost Of Special Maintenance Of Apc Marakoottom In Pampa Range During 2022-23
Tender Value
2.77 Lakhs
Estimated cost
Bid Submission
06 Oct 2022
0 days left
EMD
4160
Bank guarantee accepted
Document Fee
660
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Peermade → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Estimate Towards The Cost Of Special Maintenance Of Apc Marakoottom In Pampa Range During 2022-23
BOQ
| Sl. No. | Item Description |
| 1 | Engaging carpenter Grade I |
| 2 | Engaging skilled beldar |
| 3 | Engaging coolie |
| 4 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes |
| 5 | Providing and fabricating, supplying and fixing panels of aluminium composite panel, cladding in metaliccolour of approved shade out of 4mm thick aluminum composite panel etc. using stainless steel screwsnuts, bolts, washercleats whether silicone sea lant backer reds etc |
| 6 | Providing and aluminium T or L section for partition work 1.25 kg/m2 |
| 7 | Providing and fixing solid poly carbonate wall plain sheet 6 mm thick as approved by the engineer incharge 9as per sanctioned specifications) |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give aneven shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture . |
| 9 | Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest availablesize confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1cement :6 coarse sand) etc complete |
| 10 | Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S.gusset plates at the junctions and corners, all necessary fittings complete, including applying a primingcoat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces |
| 11 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarsesand : 4 graded stone aggregate 20 mm nominal size) |
| 12 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelCold twisted bars |
| 13 | Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs,landings, balconies and access platform |
| 14 | 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 15 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as permanufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and includingone coat of special primer applied @ 0.75 ltr /10 sqm |
| 16 | 2 LS amt for electrical , sanitary and water supply arrangements |
| 17 | 4 LS amt for tractor charge |
| 18 | GST |
| 19 | Unforssen |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 06, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 10, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender