Installation Of Submersible With Water Tank At Perua Msk
Tender Value
1.72 Lakhs
Estimated cost
Bid Submission
14 Oct 2022
0 days left
EMD
3500
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
perua → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Installation Of Submersible With Water Tank At Perua Msk
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm. |
| 2 | A) Filling in foundation or plinth by Fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity). (B) Do - by fine sand |
| 3 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety. (PCC Work) |
| 4 | 125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 5 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mmnominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.. (i) Pakur Variety. (RCC Work) |
| 6 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation and upto roof of ground floor/upto 4 m. (i) Tor steel/Mild Steel. II. Other than SAIL/ TATA/RINL. |
| 7 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).(a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 8 | Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches. |
| 9 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]. Ground Floor . c)15mm thick plaster (i) With 1:6 cement mortar |
| 10 | Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE:Cement 0.152 cu.m per100 sq.m.Ground Floor |
| 11 | White washing including cleaning and smoothening surface thoroughly. All floors : (b) Two coats (to be done on specific instruction). |
| 12 | Acrylic Distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer\"s specification) including cleaning and smoothning of surface. Two Coats. Quantity of white washing |
| 13 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth upto 150 metre. (iii) 80 mm dia. boring etc. |
| 14 | (a) 80 mm dia P.V.C.. pipe S-40 of ASTM-D-1785 approved Brand |
| 15 | (b) 40 mm dia PVC pipe S-80 of ASTM-D-1785 approved Brand |
| 16 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. Page no-52 Item No-5(iii)80mm dia. (Recomended Oriplast Brand) |
| 17 | Supplying, fitting and fixing plug of approved make conforming to I.S. specification. 40mm dia. Page No-53, Item No.10(i)of Sanitary Schedule |
| 18 | Supplying and fixing of Solvent Cement |
| 19 | (a) 25 mm dia |
| 20 | (a) 15 mm dia |
| 21 | Supplying, Fitting, fixing, jointing & lowering 40 mm Dia. Delivery pipe with Brass cylinder etc.. Including cutting threading of pipes and fitting,fixing …....... etc. complete. |
| 22 | Supplying, fitting and fixing G.I. cap at top. 100mm. |
| 23 | Supplying, fitting and fixing 300 mm M.S. housing clamp of approved quality. |
| 24 | Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No.511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 25 | Labour for fitting and fixing high density poly-ethylene pipes or P.V.C. pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge. (Payment will be made on centre line measurement of the total pipeline including specials. ) (A)Above Ground. 25mm dia. |
| 26 | 25mm dia.Elbow |
| 27 | 25mm dia.Tee |
| 28 | Reducing Socket (25mm X15 mm) |
| 29 | Union-25mm |
| 30 | Union-40mm |
| 31 | Supplying P.V.C. water storage tank of approved quality with closed top withlid (Black) - Multilayer |
| 32 | Supplying, fitting and fixing cast iron raised rain proof tank cover450mm. |
| 33 | Providing and fixing Submersible pump with necessary fittings and accessories with electric line installations etc(as per approved vendor & Model). (Recomended CRI brand) |
| 34 | Supplying, fitting and fixing self closing C.P. water tap of approved brand and make - 15 mm dia. and make - 15 mm dia. |
| 35 | Display Board Printing on Tiles Size 2\"0\" X 1\"6\" |
| 36 | GST |
| 37 | Labour cess |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 14, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender