Maintenance Of Roads ( I ) Nh08 Near Kalabagan To Khamarbari Trijunction From Ch 1.250Km To Ch 2.00Km ( Length 0.750Km ) ( Ii ) Nh08 Madhya Debendranagar To Khamarbari Trijunction ( Ch 1.00Km To Ch 1.750Km ) ( Length 0.750Km ) Under Pwd ( R And B
Tender Value
21.30 Lakhs
Estimated cost
Bid Submission
17 Oct 2022
0 days left
EMD
42619
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
jirania → Tripura
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Roads ( I ) Nh08 Near Kalabagan To Khamarbari Trijunction From Ch 1.250Km To Ch 2.00Km ( Length 0.750Km ) ( Ii ) Nh08 Madhya Debendranagar To Khamarbari Trijunction ( Ch 1.00Km To Ch 1.750Km ) ( Length 0.750Km ) Under Pwd ( R And B ) , Jirania. ( 2Nd Call )
BOQ
| Sl. No. | Item Description |
| 1 | Patch repairing/ Maintenance of bituminous surface road using Jhama brick aggregate & Viscocity Graded bitumen (VG-30).Repairing pot-holes and making up small depressions with ramming or power rolling after removal/ disposal of disintegrated materials within a lead of 50 m, cutting pot holes to regular shapes with vertical edges and levelling the bottom, cleaning the same with compressed air or any other appropriate method including screening, cleaning of aggregates; and filling up with with jhama chips using bitumen of VG-30 @ 54 kg per m3 of loose volume of jhama brick chips, after applying tack coat of bitumen on sides and bottom @ 0.75 kg/ sqm and finishing the top of repaired surface levelled with adjoining area in proper grade and camber including spreading of sand @ 0.006 cum/ sqm of prepared road surface as per direction of the Engineer-in-Charge and all as per MoRD technical specification Clauses 1900, 502, 503 and 504. |
| 2 | WBM Grading 3Providing, laying, spreading and compacting 53 mm to 0.075 mm jhama brick aggregates to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 KNin stages to proper grade and camber, applying and brooming,binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MoRD Technical Specification Clause 405.(A)By Manual Means |
| 3 | Tack coat using hot straight run bitumen of grade VG-30 on WBM.Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On WBM @ 0.75 Kg/ Sqm. |
| 4 | Tack coat using hot straight run bitumen of grade VG-30 on bituminous surface.Providing and applying tack coat using hot straight run bitumen of grade VG-30, including heating the bitumen, spraying the bitumen, cleaning and preparing the existing road surface as per specifications: On bituminous surface @ 0.50 Kg/ Sqm. |
| 5 | 20 mm thick Open-Graded Premix Carpet using Bituminous (viscocity grade/ modified bitumen) BinderProviding, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscocity grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 508. Case - I : By Manual Means: (II)Bitumen of VG-30 |
| 6 | Seal CoatProviding and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510.By Manual Means Case - IV : Type D (premix with fine sand) Bitumen (60/70 Grade) VG-30 |
| 7 | Stripping of excess soilStripping excess soil from the shoulder surface toaciheve the approved level and compacting with plate compactor at OMC as per drawing & MoRD technical specification clause 1903 |
| 8 | Surface DrainsConstruction of unlined surface drains of average cross-sectional area 0.40 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per MoRD Technical Specification Clause 307.(i) Surface Drains in ordinary soil(A) By manual means |
| 9 | Flat Brick solingProviding and laying flat brick soling layer on prepared subgrade according to lines, grades and cross-section shown on the drawing, filling joints with Earth, free from clay with a Plasticity Index not exceeding 6, watering and rolling the same with three wheeled road roller 80-100 KN as per MoRD Technical Specification Clause 412. |
AI Tender Summary
Tender Timeline
Sep 29, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender