Bis Holders Isi Mark Companies Iso Companies For Finalization Of Rates For Supply And Delivery Of Im Ii Hand Pump Spare Parts And Tools Components And Manufacture Supply And Delivery Of B Class 32Mm Dia Gi Pipes Each Three Meters Long In The Vizianagaram District , Head Assembly With Third Plate Including Cover And Cover Blot, Hex Bolt M12 X 20 As Per Is 1363, Hex Bolt M12 X 40 As Per Is 1363, Hex Nut M12, Washer 4Mm Thick For M12 Bolts, Handle Axle Remover, 3 Feet Chain Wrench, Sealing Gasket, Rubber Washer For Stuffing Box, Front Cover, Third Plate, Handal Assembly With Out Axle, Chain With Coupling, Spacer For Handle Assembly, Water Tank Assembly, Stand Assembly Normal, Stand Assembly Telescopic, Socket Riser Pipe Holder, Connecting Rod 12Mm 3Mts Long Electro Galvanizing Bright Bar ) Along With M12 X 50 Long And M12 X 20 Long Hex Coupler At Either End Welded, Hex Bolt M10 X 1.5 X 40 Is 1364 Part I, Cylinder Body With Brass Liner The Brass Im-Ii Liner Shall Confirm To Grade Cu Zn 30. As Of Is 404 / 1981. It Shall Be Temper Anneled, Reduced Cap, Handle Axle With Two Nuts And One Washer 4Mm Thick, Pluger Rod 450Mm Long With Two Couplers Of M 12 X 20, Plunger Yoke Body, Upper Valve, Check Valve, Check Valve Sheet, Spacer For Cylinger Assembly Suitable For Nitrile Rubber Pump Bucket, Upper Valve Assembly With Nitrile Rubber Pump Bucket ( Compraising Of Plunger Yoke Body, Upper Valve, Rubber Seating, Spacer And Follower ) , Lower Valve Assembly ( Confirming Rubber Seat Retainer, Rubber Seating, Check Valve And Check Valve Seat ) , Ss Rod 1.0 Meter Length, 12 Pipe Wrench, 18 Pipe Wrench, 24 Pipe Wrench, 12Mm Hand Bottom Die Set With 2 Piece Die, Double Ended Spanner M17 X M19, Big Screw Driver, Small Screw Driver, 300Mm Hack Saw Frame, Hack Saw Blades, 250Mm Triangular File With Handle, 1Kg Hammer With Handle, 3 Pipe Vice, Multi Purpose Grease ( 5Kg Tin ) , 3Mm Thick Nylon Rope ( In The Form Of 100Mts ) , Lifters For Lifting 32Mm Dia Gi Pipes, 32Mm Tap Sets With Handles ( Bsw ) , 12 Adjustable Wrench, Gi Extension Flangers 9 Rise Suitable For Telescopic Stand, Gi Extension Flangers 1 Rise Suitable For Telescopic Stand, 1 / 2 X 6 Chisels, 40Mm X 12Mm Dia Hexagonal Rod Couplers, Manufacture And Supply Of Galvanized Mild Steel Pipes ( Medium Class ) Of The 32Mm Nominal Bore Confirming To Is: 1239 / Part-I / 1990 Continuously Welded / High Frequency Induction Welded ( Hfiw ) Type And Screwed At Both Ends As Per Is: 554 And One End Fitted With Socket ( Medium Class ) Manufactured From Seam Less Pipe As Per Is: 1239 / Part-2 / 1992 And Other End Fitted With A Plastic Cap And Delivery At Departmental Stores In Prakasam District. Each Pipe Should Bear Isi Mark And Manufacturers Trade Mark And Correct Length Of 3.00M + 0 Mm Or - 25 Mm Including Cost Conveyance Delivery At Destination. The Rates Shall Be Excluding Gst., Manufacture, Supply And Delivery Of Special Toolset For Installation And Maintance Of Im-Ii Hand Pumps As Per Unicef Specifications, Excluding Taxes, Follower, Rubber Seat Retainer, Pump Bucket, Sealing Ring, Rubber Seating ( Upper Valve ) , Rubber Seating ( Lower Valve ) , Cylinder Assembly ( Complete Unit Inclusive Of Stainless Steel Plunger Rod 12Mm Dia With Nitrile Rubber Pump Bucket ) , Handle Axle Washer - 4Mm Thick To Suit M12 Is: 2016, Prevailing Torque Steel Hex Lock Nut M10 X 1.5 ( Is: 7002 / 1972 ) , Single Side Shielded Bearing Confirming To Is 6456 / 1972 Sil, Hmt, Nbc, Mb, Tat, Urb / Sbl Or Any Other Make Approved By Unicef And Acceptable To Sgs ( India ) Ltd.,
