}

Supply, Delivery, Installation, Commissioning & Trial Run Of Submersible Pumping Machinery And Other Electro Mechanical Accessories At Newly Sunk Tube Well No. I As Part Of Augmentation Of Gopiballavpur W / S Scheme Of Jhargram District Under Jhar, jhargram-West Bengal

Public Health Engineering Department-PHED has published Supply, Delivery, Installation, Commissioning & Trial Run Of Submersible Pumping Machinery And Other Electro Mechanical Accessories At Newly Sunk Tube Well No. I As Part Of Augmentation Of Gopiballavpur W / S Scheme Of Jhargram District Under Jhar. Submission Date for this Tender is 04-11-2022. Coats and Jackets Tenders in jhargram West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

34152157
Supply, Delivery, Installation, Commissioning & Trial Run Of Submersible Pumping Machinery And Other Electro Mechanical Accessories At Newly Sunk Tube Well No. I As Part Of Augmentation Of Gopiballavpur W / S Scheme Of Jhargram District Under Jhar
Open Tender
Indian
West Bengal
jhargram
04-11-2022

Tender Details

Supply, Delivery, Installation, Commissioning & Trial Run Of Submersible Pumping Machinery And Other Electro Mechanical Accessories At Newly Sunk Tube Well No. I As Part Of Augmentation Of Gopiballavpur W / S Scheme Of Jhargram District Under Jhargram Mechanical Division, P.H.E Dte- Supply and delivery of following materials at site:- Submersible pumping machinery directly coupled with submersible motor at 400V (± 10%), 50 (± 3%) Hz.Material of Construction :-Pump bowl : Housing : C.I.Pump / Motor shaft : SS-410. Impeller : Bronze/CS/SSNRV Size: 100 mmStarting Method : S/DSpeed : 2900 rpm max. Discharge(Q) - 30 m3/hrand Head (H) - 66 mtr. (Test certificate, H&Q characterstic curve should be provided at the time of delivery) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 2 80 mm dia UPVC (Standard type) Column pipe with both side threaded and one side socketed, (3 Mtr. Long ) a)3 Mtr. Long 3 b)1.5 mtr Long 4 c) Top Adoptor(CI) 5 d) Bottom Adoptor (C.I) 6 M.S fabricated split type suitable tube well cover as per tube well housingwith necessery clamping arrangementwith including holes with column pipe ,air pipe and cable entry etc. 7 102 mm. dia 0-10 kg/cm² range wall mounted bourdon type glycerine filled pressure gauge complete for tubewell outside the pump house including brass cock & fittings.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 8 102 mm. dia. wall mountedbourden type glycerine filled depth gauge with suitable dia. and length of steel air pipe with all fittings including supply of one good quality Hand pump for tubewell outside the pump house. (This cost includes 15 mm. dia. G.I. Pipe approx. 40 ft. length and specials) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 9 Anti-snapping safety device for above pump by supplyingsuitable 0.5 dia. Nylone rope of required length (double) including supply of all necessary materials as required. 10 M.S suspention clamp with necessery nuts, bolts & washersetc.suitablefor 80 mm dia pipe( Size 500 mm X 80 mm X 8 mm each) 11 100 mm dia, P.N. 1.0, CIDF Non return valve conforming to IS: 5312, part-I. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 12 100 mm dia, PN-1.0, CIDF sluice valveconforming to IS:14846. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 13 100 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to IS:13095/1991, IP 68.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 14 100 mm dia heavy type suitable length CI/MS Black pipes (for common delivery header,backwash line for pump under sl no-1, along with necessary bends, specials, fittings , viz flanges, bolts, nuts, gaskets, concentric enlarger ,MS dismenteling joint, for connecting main pipe line etc. including providing MS/Bricks/PCC support for laying of pipes, valves as required to make the installation complete. (This includes the cost of supply, delivery of common header & short piece of required length to connect the delivery pipe line) 15 1.1 KV grade, 2.5 sq.mm. 3 core PVC insulated & sheathed copper flat submersible cable conforming to IS:694 (PART-1) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 16 1.1 KV Grade 415 V, 4 core 16 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:7098 (PART-1) 2011 with latest amendmends as applicable.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 17 1.1 KV grade, 12 core, 1.5 sq. mm. Copper Control Cables, Solid Copper Conductor & Balance Stranded Copper, XLPE Insulated PVC Inner sheathed, Armoured extruded PVC Type ST2 Sheathed as per IS 7098 (Part 1) 1988. (For actuator connection from panel)Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 18 415 V, Three phase PLC Panel with minimum 2mm thickness and degree of protection IP-54, conforming to IS-8623 with suitable Bus bar, Digital Voltmeter Ammeter, Contactor, delay timer, MCB, Valve Actuator starter etc. with PLC Logic & UPS .i)7.5 -12.5 HP with SDS (star ,delta starter) (Drawing & Bill of material shall be approved by E.I.C)Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.SPEC: As per Specification attached. 19 25 KVA, 3 phase oil cooled typeservo motor operated Voltage Stabilizer, having unbalance 200 - 500 V input voltage, and 415(±1%) output voltage , Auto/manual servo voltage stabilizer with U/V,O/V,O/L protection with contactor at output side, input MCB, Ammeter Bell etc. as per I.E rules and as per instruction of EIC.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 20 Automatic plunger type chlorinator for feeding accurately controlled dosage of chlorine solution lnto the water by connecting metering with flow rate of water 0 -100 LPH with maximum pressure of 10 Kg/Cm2 suitable dosing pump & other accessories on the delivery pipe line as required, the pump shall be coupledwith 0.5 hp motor having three phase power and 1440 RPM (± 4%).Pump Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.(Motor Make- CGL/KEC/ABB/Any approved make) 21 Hard wooden board (450mm X 304.8 mmx 2 mm thick) 22 100 Amp, 240/415 V Porcelain fuse unit (Base & Bridge)Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 23 100 Amps, 415 V,ICTPN (Iron Claded Triple Pole Neutral) main switch in sheet steel enclosure having rewireable type fuse grip.(Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019) 24 100 Amps, 415 V Bus-Bar chamber having 4 nos. Aluminium Bus-Bar. (Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019) 25 100 Amp, 4 pole on load change over switch Make: Havells(category code. IHBFFE0063). 26 40 Amp, 10 kA, 240/415V, 50 Hz Double pole MCB Isolator conforming to IS / IEC: 60947-3, C characteristics with enclosure.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 27 10 Amp, 10 kA, 240/415V, 50 Hz SPN MCB conforming to IS / IEC: 60898-1, C characteristics.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 28 6-32 Amp,10 kA, 240/415V, 50 Hz SP MCB conforming to IS / IEC: 60898-1, C characteristics. (6 Amp- 3 nos.,16 Amp-1 no.) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 29 8 way SP&N Double Door horizontal Distribution Board (I/C 2 + O/C 4) conforming to IS 13032 & IS 8623 and IP42/43. Make :- Legrand (model no. 5076 11) 30 LED street light luminarie IP 66 LM6-HPDC Housing, aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no- BRP052 LED 045 CW SLMR FG S1 PSU GR ,System Efficacy greaterthan 100 lumen/watt) Make-Philips. The manufacturer has to provide LM79/LM80 reports corresponding to the luminaire/LED Chip along with type test Certificate.Respectively the luminaire manufacturer should have an in house NABL Accredited testing facility. 31 PVC mouldedchair without arm. (Make:- Nilkamal/Supreme/Cello) 32 PVC moulded table of 850 x 850x 725 mm size. (Make:- Nilkamal/Supreme/Cello) 33 Installation of the above supplied item: Installation, testing & commisioning of above supplied Pumping Machinery ,MCC panel, valves etc. (item no 1 to 14, 18 to 19, 21 to 29) by jointing submersible cable within the tubewell situated outside the pump house by making derrick arrangement by assembling the column pipes properly and fitting, fixing the pressure gauge, depth gauge, air pipe etc. in position and erection of delivery line & wash out line with the C.I specials and Tee including mending damages goods etc.all complete as per direction. This also includes the charges for laying submersible cable from tubewell to control panel by underground and saddle on wall and connection with required feeder of panel all complete. 34 Making suitable size pump foundation base ( Size: 1.00 mtr. x 1.00 mtr. x 1.5 mtr.) with supplying cement, sand, stone chips etc. in the portion of (4:2:1) including plastering, neat cement finishing etc. all Complete as per direction of EIC.(i) Tubewell outside pump house. 35 Making required nos. of brick pillar 0.25 mtr. X 0.25 mtr. For supporting of valves, actuator and pipes with 12 mm thick plaster and net cement finish complete. 36 Installation & commissioning of the above supplied chlorinator with all accessories, PVC tank and drawing of power line as per I.E. rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation (at least 200mm) with concrete mixture (Sand, cement, stone chips) and neat cement finishing by supplying of all required materials and testing the entire set as per direction of E.I.C.(Power will be feed from PLC panel of pumping machinery) N.B - 1)T.C & G.C of pump motor needed.2)All works shoul be carried out as per reaevant & lates IS code. 37 S & F of 3 dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. S&F of 1.5 mtr long arm bracket (removable type) incl. CC (6:3:1) muffing(450X450X600) with 3 mm thick neat cement finish & painting incl. S&F of 200x150x100 mm 16 SWG GI loop box with necessary power connection by3x 22/0.3 (1.5 Sq.mm) (2 nos. P&N and 1 no. ECC) FRLSH PVC insulated & unsheathed copper wire (Approved make) in 20 mm size PVC rigid conduit FRLSH (Precision make) incl. necy. fittings as required as per direction of EIC. (for 12m length @ 102/mtr.) 38 Laying of cable (as in item no. 16) on wall/surface incl. S & F of MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C. 39 Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofcable (as in item no. 16) all complete as per direction of E.I.C. 40 Finishing the end of cable (as in item no. 16) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materialsall complete as per direction of E.I.C. 41 Making internal wiring/electrification of the Pump house by (2x 22/0.3 (1.5 sqmm) + 1x 22/0.3 (1.5 sqmm) single core PVC insulated multistrand FRLSH Grade flexible copper wire through 20 mm PVC conduit pipe/casing by supplying one no. 40 Amp, 10kA, 240/415V,50 HzSPN/DP MCB Isolator conforming to IS / IEC: 60947-3, C characteristics. (As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019) with required module PVC Board & piano key type switch. (ave. run 6 mtr). i) LED Tube set point-2 nos., Bulk Head light point- 1 no., 5 pin 6 Amps. Plug point- 1 no., 16 Amp socket & switch- 1 no, indicator- 1 no. each,with necy. earthing arrangement & one fan point (Total point 6 nos. points) including drawing power by suitable gauge (2.5 mm2) of copper wire from installed cut-out to SPN/DP MCB within DB through 20 mm PVC casing capping (precision make) as per direction of EIC (fittings should be of Philips make & wiring should be with continuous earthing arrangement and 20W two nos. 4 ft long LED tube light setsPHILIPS Astra Line, one no. bulk head (Endura WT202W LED6S NW PSU S2 PC), one no. 0-4 step fan regulator (Humfree), fittings etc to be supplied by agency). 42 (a) Earthing with 50 mm diameter G.I. pipe 3.64 mm thick x 3Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4Mtr.long) 13 mm diameter x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F of 15mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed.i) For soft soil by ISI Medium GI pipe. 43 (b) Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm diaholes on the GI pipe. 44 (c) Extra for treatment of soil by salt and charcoal coke for pipe electrode. 45 (d) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.Length of busbar is 0.5 mtr. 46 (e) Connecting the equipments body to earth busbar including S&F 20 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc. 47 Supply, delivery and fitting-fixing of 230 volt1200 mm sweep AC ceiling fan withball bearing complete with all accessories such as blade, canopy, fork, down rod etc. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. 48 Trial operation and guarding of the installed pumping machinary after receiving power and commisioning the pumping machinary as per direction of E.I.C 49 Add: 18% GST 50 Add: 1% CESS

Key Value

Document Fees
Refer document
EMD
INR 22755.0 /-
Tender Value
Refer document

BOQ Items

Name of Work: Supply, delivery, installation, commissioning & trial run of submersible pumping machinery and other electro mechanical accessories at newly sunk tube well no. I as part of augmentation of Gopiballavpur w/s scheme of Jhargram District under Jhargram Mechanical Division, P.H.E Dte.
Sl. No. Item Description
1Supply and delivery of following materials at site:- Submersible pumping machinery directly coupled with submersible motor at 400V (± 10%), 50 (± 3%) Hz. Material of Construction :- Pump bowl : Housing : C.I. Pump / Motor shaft : SS-410. Impeller : Bronze/CS/SS NRV Size: 100 mm Starting Method : S/D Speed : 2900 rpm max. Discharge(Q) - 30 m3/hrand Head (H) - 66 mtr. (Test certificate, H&Q characterstic curve should be provided at the time of delivery) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
280 mm dia UPVC (Standard type) Column pipe with both side threaded and one side socketed, (3 Mtr. Long ) a)3 Mtr. Long
3b)1.5 mtr Long
4c) Top Adoptor(CI)
5d) Bottom Adoptor (C.I)
6M.S fabricated split type suitable tube well cover as per tube well housingwith necessery clamping arrangementwith including holes with column pipe ,air pipe and cable entry etc.
7102 mm. dia 0-10 kg/cm² range wall mounted bourdon type glycerine filled pressure gauge complete for tubewell outside the pump house including brass cock & fittings. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
8102 mm. dia. wall mountedbourden type glycerine filled depth gauge with suitable dia. and length of steel air pipe with all fittings including supply of one good quality Hand pump for tubewell outside the pump house. (This cost includes 15 mm. dia. G.I. Pipe approx. 40 ft. length and specials) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
9Anti-snapping safety device for above pump by supplyingsuitable 0.5" dia. Nylone rope of required length (double) including supply of all necessary materials as required.
10M.S suspention clamp with necessery nuts, bolts & washersetc.suitablefor 80 mm dia pipe( Size 500 mm X 80 mm X 8 mm each)
11100 mm dia, P.N. 1.0, CIDF Non return valve conforming to IS: 5312, part-I. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
12100 mm dia, PN-1.0, CIDF sluice valveconforming to IS:14846. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
13100 mm dia, (PN-1.0) CIDF, wafer type butterfly Valve operated by three phase actuator conforming to IS:13095/1991, IP 68. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
14100 mm dia heavy type suitable length CI/MS Black pipes (for common delivery header,backwash line for pump under sl no-1, along with necessary bends, specials, fittings , viz flanges, bolts, nuts, gaskets, concentric enlarger ,MS dismenteling joint, for connecting main pipe line etc. including providing MS/Bricks/PCC support for laying of pipes, valves as required to make the installation complete. (This includes the cost of supply, delivery of common header & short piece of required length to connect the delivery pipe line)
151.1 KV grade, 2.5 sq.mm. 3 core PVC insulated & sheathed copper flat submersible cable conforming to IS:694 (PART-1) with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
161.1 KV Grade 415 V, 4 core 16 sq.mm. PVC sheathed XLPE insulated Al. armoured cable conforming to IS:7098 (PART-1) 2011 with latest amendmends as applicable. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
171.1 KV grade, 12 core, 1.5 sq. mm. Copper Control Cables, Solid Copper Conductor & Balance Stranded Copper, XLPE Insulated PVC Inner sheathed, Armoured extruded PVC Type ST2 Sheathed as per IS 7098 (Part 1) 1988. (For actuator connection from panel) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
18415 V, Three phase PLC Panel with minimum 2mm thickness and degree of protection IP-54, conforming to IS-8623 with suitable Bus bar, Digital Voltmeter Ammeter, Contactor, delay timer, MCB, Valve Actuator starter etc. with PLC Logic & UPS .i)7.5 -12.5 HP with SDS (star ,delta starter) (Drawing & Bill of material shall be approved by E.I.C)Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.SPEC: As per Specification attached.
1925 KVA, 3 phase oil cooled typeservo motor operated Voltage Stabilizer, having unbalance 200 - 500 V input voltage, and 415(±1%) output voltage , Auto/manual servo voltage stabilizer with U/V,O/V,O/L protection with contactor at output side, input MCB, Ammeter Bell etc. as per I.E rules and as per instruction of EIC.Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
20Automatic plunger type chlorinator for feeding accurately controlled dosage of chlorine solution lnto the water by connecting metering with flow rate of water 0 -100 LPH with maximum pressure of 10 Kg/Cm2 suitable dosing pump & other accessories on the delivery pipe line as required, the pump shall be coupledwith 0.5 hp motor having three phase power and 1440 RPM (± 4%). Pump Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments. (Motor Make- CGL/KEC/ABB/Any approved make)
21Hard wooden board (450mm X 304.8 mmx 2 mm thick)
22100 Amp, 240/415 V Porcelain fuse unit (Base & Bridge)Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
23100 Amps, 415 V,ICTPN (Iron Claded Triple Pole Neutral) main switch in sheet steel enclosure having rewireable type fuse grip.(Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019)
24100 Amps, 415 V Bus-Bar chamber having 4 nos. Aluminium Bus-Bar. (Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019)
25100 Amp, 4 pole on load change over switch Make: Havells(category code. IHBFFE0063).
2640 Amp, 10 kA, 240/415V, 50 Hz Double pole MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics with enclosure. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
2710 Amp, 10 kA, 240/415V, 50 Hz SPN MCB conforming to IS / IEC: 60898-1, "C" characteristics. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
286-32 Amp,10 kA, 240/415V, 50 Hz SP MCB conforming to IS / IEC: 60898-1, "C" characteristics. (6 Amp- 3 nos.,16 Amp-1 no.) Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
298 way SP&N Double Door horizontal Distribution Board (I/C 2 + O/C 4) conforming to IS 13032 & IS 8623 and IP42/43. Make :- Legrand (model no. 5076 11)
30LED street light luminarie IP 66 LM6-HPDC Housing, aerodynamically designed with better thermal management/ Potted driver is to be provided,the luminaire and housing should be from the same manufacturer(cat no- BRP052 LED 045 CW SLMR FG S1 PSU GR ,System Efficacy greaterthan 100 lumen/watt) Make-Philips. The manufacturer has to provide LM79/LM80 reports corresponding to the luminaire/LED Chip along with type test Certificate.Respectively the luminaire manufacturer should have an in house NABL Accredited testing facility.
31PVC mouldedchair without arm. (Make:- Nilkamal/Supreme/Cello)
32PVC moulded table of 850 x 850x 725 mm size. (Make:- Nilkamal/Supreme/Cello)
33Installation of the above supplied item: Installation, testing & commisioning of above supplied Pumping Machinery ,MCC panel, valves etc. (item no 1 to 14, 18 to 19, 21 to 29) by jointing submersible cable within the tubewell situated outside the pump house by making derrick arrangement by assembling the column pipes properly and fitting, fixing the pressure gauge, depth gauge, air pipe etc. in position and erection of delivery line & wash out line with the C.I specials and Tee including mending damages goods etc.all complete as per direction. This also includes the charges for laying submersible cable from tubewell to control panel by underground and saddle on wall and connection with required feeder of panel all complete.
34Making suitable size pump foundation base ( Size: 1.00 mtr. x 1.00 mtr. x 1.5 mtr.) with supplying cement, sand, stone chips etc. in the portion of (4:2:1) including plastering, neat cement finishing etc. all Complete as per direction of EIC.(i) Tubewell outside pump house.
35Making required nos. of brick pillar 0.25 mtr. X 0.25 mtr. For supporting of valves, actuator and pipes with 12 mm thick plaster and net cement finish complete.
36Installation & commissioning of the above supplied chlorinator with all accessories, PVC tank and drawing of power line as per I.E. rules by supplying of necessary wire and continuous earthing. This include the cost of all necessary CC foundation (at least 200mm) with concrete mixture (Sand, cement, stone chips) and neat cement finishing by supplying of all required materials and testing the entire set as per direction of E.I.C.(Power will be feed from PLC panel of pumping machinery) N.B - 1)T.C & G.C of pump motor needed.2)All works shoul be carried out as per reaevant & lates IS code.
37S & F of 3" dia 1.5 mt minipole with baseplate to be fixed on rooftop incl. S&F of 1.5 mtr long arm bracket (removable type) incl. CC (6:3:1) muffing(450X450X600) with 3 mm thick neat cement finish & painting incl. S&F of 200x150x100 mm 16 SWG GI loop box with necessary power connection by3x 22/0.3 (1.5 Sq.mm) (2 nos. P&N and 1 no. ECC) "FRLSH" PVC insulated & unsheathed copper wire (Approved make) in 20 mm size PVC rigid conduit "FRLSH" (Precision make) incl. necy. fittings as required as per direction of EIC. (for 12m length @ 102/mtr.)
38Laying of cable (as in item no. 16) on wall/surface incl. S & F of MS saddles with earthing attachment in 10 SWG GI (Hot Dip) wire, making holes etc. as necy. mending good damages and painting all complete as per direction of E.I.C.
39Supplying and fixing of compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry ofcable (as in item no. 16) all complete as per direction of E.I.C.
40Finishing the end of cable (as in item no. 16) by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materialsall complete as per direction of E.I.C.
41Making internal wiring/electrification of the Pump house by (2x 22/0.3 (1.5 sqmm) + 1x 22/0.3 (1.5 sqmm) single core PVC insulated multistrand FRLSH Grade flexible copper wire through 20 mm PVC conduit pipe/casing by supplying one no. 40 Amp, 10kA, 240/415V,50 HzSPN/DP MCB Isolator conforming to IS / IEC: 60947-3, "C" characteristics. (As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019) with required module PVC Board & piano key type switch. (ave. run 6 mtr). i) LED Tube set point-2 nos., Bulk Head light point- 1 no., 5 pin 6 Amps. Plug point- 1 no., 16 Amp socket & switch- 1 no, indicator- 1 no. each,with necy. earthing arrangement & one fan point (Total point 6 nos. points) including drawing power by suitable gauge (2.5 mm2) of copper wire from installed cut-out to SPN/DP MCB within DB through 20 mm PVC casing capping (precision make) as per direction of EIC (fittings should be of Philips make & wiring should be with continuous earthing arrangement and 20W two nos. 4 ft long LED tube light setsPHILIPS Astra Line, one no. bulk head (Endura WT202W LED6S NW PSU S2 PC), one no. 0-4 step fan regulator (Humfree), fittings etc to be supplied by agency).
42(a) Earthing with 50 mm diameter G.I. pipe 3.64 mm thick x 3Mtr. (10ft.) long and 1 x 4 SWG G.I. wire (4Mtr.long) 13 mm diameter x 80mm (3inch) long G.I. Bolts, double nuts, washer including S & F of 15mm diameter G.I. pipe protection (1 Mtr. Long) to be filled with bitumen partly below ground level to an average depth of 3.65Mtr.(12ft.) below the ground level and restoring the surface duly rammed.i) For soft soil by ISI Medium GI pipe.
43(b) Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm diaholes on the GI pipe.
44(c) Extra for treatment of soil by salt and charcoal coke for pipe electrode.
45(d) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.Length of busbar is 0.5 mtr.
46(e) Connecting the equipments body to earth busbar including S&F 20 mm x 6 mm galvanised (Hot Dip) MS flat on wall/floor with GI saddles as required and connection to equipments incl. drilling holes, with bolts, nuts, washers etc.
47Supply, delivery and fitting-fixing of 230 volt1200 mm sweep AC ceiling fan withball bearing complete with all accessories such as blade, canopy, fork, down rod etc. Make :- As per approved vendor list of PHED vide no. PHE/IV/2277/W-181/19 dated 25.09.2019 with latest amendments.
48Trial operation and guarding of the installed pumping machinary after receiving power and commisioning the pumping machinary as per direction of E.I.C
49Add: 18% GST
50Add: 1% CESS
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail