Repair To Roof Sheet, Joinery, Flooring, Gi, Sanitary Fitting And Other Misc B / R Works In Otm Accn For Aps And Supply Pl Asc At Area-Ii Under Ge Kamptee
Tender Value
25 Lakhs
Estimated cost
Bid Submission
11 Oct 2022
0 days left
EMD
50000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kamptee → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair To Roof Sheet, Joinery, Flooring, Gi, Sanitary Fitting And Other Misc B / R Works In Otm Accn For Aps And Supply Pl Asc At Area-Ii Under Ge Kamptee
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 2 | M&L for 0.50mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet (AZ150 ISI Mark) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/ J-type bolt/ L-type bolt complete all as per manufacturer instructions complete all as specified and directed. |
| 3 | S&F pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick (AZ150 ISI Mark) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ J-type bolt/ L-type boltcomplete all as specified and directed. |
| 4 | Dismantling of timber fillets, rails, posts, rafters, purlins under 40 Sq cm in section complete all as specified and directed. |
| 5 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed. |
| 6 | M&L for framed work such as grills, gratings, etc.with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 7 | S&F mild steelwork such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, channel or flat section) including distance pieces, cleat etc complete all as specified and directed. |
| 8 | M&L for preparation of new or previously untreated surfaces of steel and iron work of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide on new surfaces in any tint complete all as specified and directed. |
| 9 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/ slabs/ blankets any thickness and wall paneling including cover fillets, complete all as specified and directed. |
| 10 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mm x 15mm x 0.30mm, cross tee shall be 32mm x 15mm x 0.30mm thick with black lining in mid portion and wall angle shall be 24mm x 24mm x 0.30mm thick complete all as specified and directed. |
| 11 | Demolition of RCC in any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 12 | M&L for RCC type B1 (1:2:4) (using 12.5mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 13 | M&L for providing precast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) set in CM 1:4 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water roughs, mangers, shelves and similar articles with plain faces, complete all as specified and directed. |
| 14 | M&L for mild steel TMT bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed. |
| 15 | M&L for mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed. |
| 16 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and directed. |
| 17 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed. |
| 18 | M&L for brick work with fly ash brick old size straight of curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 19 | All as per item No 18 above but half brick wall in CM 1:4 complete all as specified and directed. |
| 20 | Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed. |
| 21 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 22 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 23 | Supply only liquid water proofing compound complete all as specified and directed. |
| 24 | M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 25 | M&L for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and directed. |
| 26 | M&L for applying two coats of OBD over a coat of chalk whiting on new wall surfaces including preperation of surfaces complete all as specified and directed. |
| 27 | M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 29 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 30 | M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed. |
| 31 | M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular), polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat in CM 1:3 finished even and fair complete all as specified and directed. |
| 32 | M&L for coloured non skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 33 | M&L for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/ dados set and jointed in neat cement slurry and pointed in coloured cement to match and including 10mm thick backing coat in CM 1:3 finished even and fair complete all as specified and directed. |
| 34 | Demolition of stone slabs & tiles of any description or thickness in floors, aprons etc. laid, bedded & pointed in any mortar complete all as specified and directed. |
| 35 | M&L for machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed. |
| 36 | M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry @ 2 Kg per SQM, mixed with pigment to match the shade of the slab including rubbing and polishing, laid over and including 10mm thick screed in cement mortar 1:4 including taking down old one, complete all as specified and directed. |
| 37 | S&F pre-polished granite 20mm thick fixed on platform/ shelves/ steps/ cill over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc complete all as specified and directed. |
| 38 | Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.50 sqm complete all as specified and directed. |
| 39 | Taking down door / window frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 40 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 41 | S&F pressed steel frame for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 42 | S&F pressed steel frame for doors of size 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of priming complete all as specified and directed. |
| 43 | M&L for PCC 1:3:6 type C-0 using (using 12.5mm graded stone aggregate) as in filling of pressed steel frame complete all as specified and directed. |
| 44 | S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 45 | S&F 30mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 46 | S&F second class hard wood 35mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 47 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying & fixing in opening as per complete all as specified and directed. |
| 48 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 49 | S&F aluminium (colour powder coated) three track sliding window comprising of one fly proof shutter and two glazed shutters with frames of size 92.0mm x 31.75mm x 1.30mm thick and shutter frames of size 40mm x 18mm x 1.55mm thick with necessary joining cleats, glazing clips, rubber gasket, anodised aluminium snap beading and connected locking arrangement complete all as specified and directed. Notes: (i) Glass filling in panels of windows and aluminium wire mesh/wire cloth shall be deemed to be included in the quoted rate for the item;(ii) Aluminium alloy wire cloth in panels of wire gauzed shutter shall be 0.45 mm nominal dia of wire and avg width of aperture 1.40 mm, fixed with aluminium wire staples; (iii) Glass filling in panels of glazed shutter shall be 5 mm thick tinted sheet glass of approved make and shade/tintMake of Aluminium Sections powder coated: Jindal or equivalent. |
| 50 | M&L for aluminium (anodised) grill made out of 5mm wide flat, square, rectangular or similar section, fixed with channel of size 38mm x 12mm x 13mm (Section 8778) complete all as per manufacturer\"s catalogue 7 specifications (Make: Grill No. 20 of \"DECO GRILL\" or equivalent) complete all as specified and directed. |
| 51 | S&F colour powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 52 | S&F colour powder coated (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung/ fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1no.) complete all as specified and directed. |
| 53 | M&L for built in steel cup board shutter made out mild steel, plain back sheet 1mm thick as in shutter and 1.25mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, including 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing complete all as specified and directed. |
| 54 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 55 | S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 56 | S&F 100mm long SS butt hinges and fixed with screw/ welded to frames etc complete all as specified and directed. |
| 57 | S&F in repair 100mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and directed. |
| 58 | S&F 125mm Aluminium pressed handles fixed complete all as specified and directed. |
| 59 | S&F 150mm Aluminium pressed handles fixed complete all as specified and directed. |
| 60 | S&F 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 61 | S&F 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed. |
| 62 | S&F in repairs 150mm Aluminium barrel tower bolts, fixed complete all as specified and directed. |
| 63 | S&F in repairs 125mm Aluminium pressed handles fixed complete all as specified and directed. |
| 64 | S&F 250mm in repairs Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 65 | Hacking out old broken glass (any thickness size and quality and description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed. |
| 66 | M&L for 4.0mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each panes complete all as specified and directed. |
| 67 | S&F 4mm thick sheet glass, ordinary quality and glazing with oil putty/ wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed. |
| 68 | S&F 4mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/ wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed. |
| 69 | Demolition of cement concrete any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 70 | M&L for 75mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed. |
| 71 | M&L for providing 75mm thick cement concrete 1:4:8 type D2 (Using 40mm graded stone agg) as in sub base complete all as specified and directed. |
| 72 | M&L for pre polished chequered tiles rubber pressed glossy finish (any colour) 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment including 20mm screed bedding in cement mortar (1:4)complete all as specified and directed. |
| 73 | S&F in repairs 25mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets complete all as specified and directed. |
| 74 | S&F fancy type curtain brackets of approved quality fixed to wall with screws complete all as specified and directed. |
| 75 | S&F 15mm bore GI tubing medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed. |
| 76 | S&F 20mm bore GI tubing medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed. |
| 77 | Refixing 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 78 | Refixing 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 79 | S&F in repairs vitreous china white squatting pan \"Orissa Pattern\" size 580x440mm, with integrated foot rest (excludingflushing sistern, flush pipe etc) including making good to floor complete all as specified and directed. |
| 80 | S&F in repairs vitreous china wash down water closet (pedestal pattern) \"P\" or \"S\" trap including jointing including plastic water closet seat, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device complete all as specified and directed. |
| 81 | S&F in repair vitreous china wash basin, white, with padestal flat back, size 540 x 400mm but including brackets and padestal etc complete all as specified and directed. |
| 82 | Supply only 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make : Prayag Cat No 501 or equivalent. |
| 83 | S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified and directed. Make : Prayag Cat No 501 |
| 84 | S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed. |
| 85 | S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and directed. |
| 86 | S&F grating doom with waste hole 125mm dia of chromium plated complete all as specified and directed. |
| 87 | S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed. |
| 88 | S&F in repair 15mm bore Stop Valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed. |
| 89 | S&F in repair 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed. |
| 90 | Supply only pillar cock, swan neck central hole basin mixer with hot/cold connection without pop up waste system complete all as specified and directed.Make:- Prayag Cat part No 8750 or equivalent in Hindware / Cera. |
| 91 | S&F in repair 15mm dia Pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, fancy type screwed for iron pipe and fixed complete all as specified and directed. |
| 92 | S&F in repair 15mm dia bib tap cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 93 | S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed. |
| 94 | S&F in repair 15mm dia long shank and cup (concealed type) stop valve chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed. |
| 95 | S&F in repair PVC connection 15mm dia, 450mm long including PTMT check nut complete all as specified and directed. |
| 96 | S&F in repairs stop valve/angle cock 15mm dia cast copper alloy chromium plated fancy type high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed. |
| 97 | S&F tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed. |
| 98 | S&F in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste pipe 32mm dia complete all as specified and directed. |
| 99 | S&F waste fitting, 32mm/40mm brass, chromium plated for sink, basin, etc with long screwd shank and fly nut complete all as specified and directed. |
| 100 | S&F in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed. |
| 101 | S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 102 | S&F in repair 110mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and directed. |
| 103 | S&F in repair 75mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one mtr apart complete all as specified and as directed. |
| 104 | Dismantling water tank of capacity exc 250 ltr & not exc 500 ltr and removing to store of any description complete all as specified and directed. |
| 105 | Dismantlingwater tank of capacity exc 500 ltr & not exc 1000 ltr and removing to store of any description complete all as specified and directed. |
| 106 | S&F 500 ltrs capacity rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 107 | S&F 1000 ltrs capacity rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 108 | M&L for gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 109 | M&L for gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 110 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 111 | S&F in repairs 2-way angle cock with flange 15mm dia cast copper alloy chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed complete all as specified and directed.Make:- Prayag Cat part No 7711 or equivalent. |
| 112 | S&F in repair health faucet of 15mm bore brass cromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. (Make: Prayag cat no BEA-40. |
| 113 | Supply only plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 114 | S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 115 | S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make : Prayag Cat Part No 551 equivalent |
| 116 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and directed. |
| 117 | S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make prayag cat No BEA 44 or equivalent |
| 118 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 119 | S&F in repair 110mm bore PVC (SWR) Bends any radius complete all as specified and directed. |
| 120 | S&F in repair 75mm bore PVC (SWR) Bends any radius complete all as specified and directed. |
| 121 | S&F in repair 110mm bore PVC (SWR) branch piece single Y equal or unequal complete all as specified and directed. |
| 122 | S&F in repair 75mm bore PVC (SWR) branch piece single Y equal or unequal complete all as specified and directed. |
| 123 | S&F in repair PVC (SWR) branch piece, double Y equal or unequal for 110mm dia bore complete all as specified and directed. |
| 124 | S&F in repair PVC (SWR) branch piece, double Y equal or unequal for 75mm dia bore complete all as specified and directed. |
| 125 | S&F in repair PVC (SWR) vent cowl 75mm bore complete all as specified and directed. |
| 126 | S&F in repair CP grating of size 100mm dia complete all as specified and directed complete all as specified and directed. |
| 127 | M&L for cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3, complete all as specified and directed. |
| 128 | Cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girthin cement mortar 1:3 complete all as specified and directed. |
| 129 | M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed. |
| 130 | M&L for providing fan hooks for ceiling fans with suitable suspender complete all as specified and directed. |
| 131 | S&F 100mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 132 | S&F stack clamps made out of 25mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed. |
| 133 | M&L for stack clamps out of 50mm by 5mm flat iron and 10mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe complete all as specified and directed. |
| 134 | Dismantling boarding, any description, fixed in any position with screw complete all as specified and directed. |
| 135 | S&F in repair 18mm thick Alstone wood Polymer ComposiveBoard (WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets complete all as specified and directed. |
| 136 | M&L for rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course as required completeincl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note: Rate for form work if required to be included in the rate quoted by the contractor. |
| 137 | Dismantling loose/ disintegrated portion of RCC Chajjas, bands, shelves, beams, coloumn or slab and similar work including support if required and stitching of cracks with MS U clamps of 8mm dia @ 150mm c/c with inserting concrete block strecthner with cement mortar 1:3 mixed with adhesive chemical (polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with 10mm thick plastering in CM 1:4 finished even & smooth without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed. |
| 138 | Welding to existing steel door/gate, window in repairs not exc 2.5cm in length thickness of metal exc 6mm but not exc 9mm complete all as specified and directed. |
| 139 | Welding to existing steel window in repairs exc 2.5cm in length but not exc 5cm in length thicknes of metal exc 6mm but not exc 9mm complete all as specified and directed. |
| 140 | S&F expanded metal, cut to length, bent to shape required & tying with & including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied & fixed complete to wood or steel members eight per square metre exc 4Kg complete all as specified and directed. |
| 141 | S&F rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-W (Gde-E- 250)quality-A, complete all as specified and directed. |
| 142 | S&F in repair 20mm bore ball valves high pressure of PTMT with apoxy coated aluminum rod & high dencity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210g) complete all as specified and directed. |
| 143 | Taking down existing aluminium door setting a side and change the double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed and refixing of aluminium door in same position complete all as specified and directed. |
| 144 | S&F in repair door closer hydraulically regulated designation No.3 universal type of Aluminium (Die cast body) suitable for door shutters of 851 to 1000mm in width and fixed complete all as specified and directed. |
| 145 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs.34,032.50] |
AI Tender Summary
Tender Timeline
Sep 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 13, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender