Chemicals and Fertilizers Boards / Undertakings / PSU Closing in 0 days TDR #34149496

Annual Contract For Plant Maintenance Jobs

Issued by Boards / Undertakings / PSU · tandur, Telangana
Tender Value
Ref. Documents
Estimated cost
Bid Submission
12 Oct 2022
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
tandur → Telangana
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Annual Contract For Plant Maintenance Jobs

BOQ

Name of Work:Open e-tender for Annual contract for Plant Maintenance Jobs Reg
Sl. No. Item Description
1General and Routine jobs of Kiln and Preheater section equipments including shift operation on round the clock basis. Refer detail quantity given in scope of work Part - III of clause no -1 to 5 of part - A and Part - B 6 to 33
2Kiln equipment lubrication and greasing (i.e. tyre - 3nos, support roller - 6 nos, thrust roller -01 no & girth gear with pinion dipped lubrication - 01 set, nose ring fan -2 nos, preduster flaps -1 nos etc.), minimum quantity per day - 14 Nos per day
3Temperature readings of support roller, kiln shell radiation and girth gear
4Cooler equipment lubrication and greasing (i.e. cooler cross head bearing both sides- 8Nos, grate drive chains -3nos, guide sprocket -3nos, Clinker breaker - 1nos, Preheater area Belt bucket elevator-1Nos, Kiln feed bucket elevator -1 nos, weigh feeder -1nos etc.)Total equipment 18nos per day) minimum quantity per day - 18 Nos
5Shifting of materials (i.e cylinders. Plates, equipment spares, lubricants) Material Less than 2MT
6Stores to workplace ( Ground floor)
7Ground floor to 30 Mtrs
8Preheater equipment checking i.e. servicing of air blaster and flapper valves (Air blasters - 30 Nos, Flapper valves - 15 Nos, ) Minimium Qty 6nos airblaster servicing & 2NosFlap servicing. Total air blaster 6nos per day and flap valaves 2nos per day ,minimum quantity per day - 8 Nos
9General and Routine maintenance of Coal mill section equipments including shift operation on round the clock basis.
10Raw coal hopper feeding from reclaimer to raw coal hopper
11Shifting of materials (i.e cylinders. Plates, equipment spares, lubricants) Material Less than 2MT
12Stores to workplace ( Ground floor)
13Ground floor to 30 Mtrs
14Coal mill equipment lubrication and greasing (i.e. FK pump -2 nos, best o feeder - 2nos,ESP screw conveyor -2 nos ESP RAL -1 nos, Cyclone RAL -6Nos,fine coal hopper top screw - 2nos, coal mill fan 1 & 2 -2nos, weigh feeder - 2nos etc.) minimum quantity per day - 03 Nos
15General and Routine maintenance of LS Crusher, Raw Mill section equipments including shift operation on round the clock basis.
16Feeding of Limestone crusher to reclaimer stack pile
17Raw mill equipment lubrication and greasing and checking and replacement (i.e. reclaimer 1 & 2 - 2 nos, belt conveyor - 07 nos, weigh feedres - 03 nos, PJBF RAL - 6nos, Chain conveyor - 2 nos, Elevator-1 nos, Raw mill fan - 01 no & PJBF fan - 01 nos, multi cyclone discharge rotary air locks - 04 nos, belt bucket elevator - 01 no etc.) Total equipment 28 Nos, minimum quantity per day - 15 Nos
18Shifting of materials (i.e cylinders. Plates, equipment spares, lubricants) Material Less than 2MT
19Stores to workplace ( Ground floor)
20Ground floor to 30 Mtrs
21General and Routine maintenance of cement mills section equipments.
22Cement mill equipment lubrication and greasing (i.e. belt conveyors - 07 nos, Girth gear - 02 nos, counter shaft - 08 nos, trunnion bearing - 04 nos, weigh feeder - 06 nos, belt bucket elevators - 02 nos, chain bucket elevator - 02 nos & ESP screw conveyor - 02 nos etc. Total equipment 33 Nos, minimum quantity per day - 10 Nos
23Maintenance of elevators - 04 nos.
24Shifting of materials (i.e cylinders. Plates, equipment spares, lubricants) Material Less than 2MT
25Stores to workplace ( Ground floor)
26Ground floor to 30 Mtrs
27General and Routine maintenance of packing plant & Coal crusher section equipments.
28Packing plantequipment lubrication and greasing (bucket elevator - 05 nos, conveyor belts - 14 nos, greasing of packer - 05 nos, wagon loading machines - 08 nos etc.) Total equipment 32 Nos, minimum quantity per day - 8 Nos
29Coal crusher equipment lubrication and greasing (i.e. belt conveyor - 05 nos, gear boxes - 05 nos, coal crusher - 01 no, vibrating screen - 01 no, etc ) Total equipment 12 Nos, minimum quantity per day - 04 Nos
30Shifting of materials (i.e cylinders. Plates, equipment spares, lubricants) Material Less than 2MT
31Stores to workplace ( Ground floor)
32Ground floor to 30 Mtrs
33Packer maintenance on daily basis (i.e. checking and calibration, replacement of rubber spouts & sack holders etc.)
34Replacement of various sizesof Gearboxes/ Fans/Motors/any machinery items etc. (any size)withalignment atanyelevation during shutdown and break down.
35Dismantlingand Shifting
36Erection, Alignment and finishing work.
37Replacementof HRCS Castingsi.e. Cooler side casting,Grate plates with its beam fixing & alignment, Lip plate, Tip castings,Conical segmentetc during Shutdown
38Dismantling and shifting to service yard.
39Erection, welding and Finishing work
40Kiln Throttlingdamper replacement – ( 3 MT ofapproximate weight per set)during shutdown.
41Dismantlingand Shifting
42Erection, Support welding and finishing work.
43ReplacementofCementmillshellliners,Headliners, Diaphragmliners during shutdown.
44Dismantling and Shifting to storage yard.
45Erection Alignment and finishing work.
46Replacement of itemsin Deep Pan Conveyor/ Bucket elevators/ Drag chain( Kiln feed/ Cement Mill/ Packing Plant) during shutdown
47Headdrumassembly
48Dismantlingand Shifting
49Erection Alignment and finishing work.
50Taildrumassembly
51Dismantling and Shifting
52Erection Alignment and finishing work.
53DPC
54Replacement of DPC partition plates and fixing.
55Replacement / Repair of DPC buckets and alignment
56Replacement of rollers and finishing work.
57Repair of partition web plate strengthening
58RAILS
59Dismantling and Shifting
60Erection and alignment
61Structural & Plate work like ducts, chutes,bends,etc,works during shutdown / Break down of the total plant.
62Fabrication and finishing work
63Dismantling and Shifting
64Erection, welding, finishing work.
65Immersion Tube Replacement in Cyclone
66Fabrication and finishing work
67Dismantling and Shifting
68ReplacementofAligned conveyor chain inL.S. Crusher
69Fabrication and finishing work
70Dismantling and Shifting
71Angle frame or Beam frame fixing & removal for holding the bricks in preheater section
72Brick retainer plate (includes 6- 10mm thk plate fabrication and bottom ribs to be provided for support)
73Shifting of cooling fan at kiln shell levels 5- 65mtrs (includes removal /fixing and shifting from ground floorto kiln platform level) Note: crane will be provided by CCI
74Replacement of damaged spring plates and tightenng of ropes at kiln inlet & outlet segment
75Kiln outlet tip casting replacement work (Includes removal/fixing of SS bolt, cutting, welding, anchor welding & addditional patch work (if required) and finishing works to start the plant smoothy, etc.,
76Replacement of inner & outer tip casting segment (24 Nos)
77Replacement of Damaged SS bolt at Inner & outer tip casting bolts
78Multi channel burner pipe Maintenance work during shutdown
79Brick retainer plate (includes 6- 10mm thk plate fabrication and bottom ribs to be provided for support)
80Shifting of cooling fan at kiln shell levels 5- 65mtrs (includes removal /fixing and shifting from ground floorto kiln platform level) Note: crane will be provided by CCI
81Replacement of damaged spring plates and tightenng of ropes at kiln inlet & outlet segment
82Cooler Grate 1, 2 & 3 maintenance works during shutdown
83Replacement of Dead grate plate, top dead grate plate, 25mm grate plate, 25mm half grate plate 13mm grate plate 13mm half grate plate & side casting (Includes removal/fixing of grate plate, cutting, welding, tightening of bolts, & finishing works to start the plant smoothly, etc.,)
84Replacement of carrying wheel & drive crosshead wheel with bearing & assembly and rail replacement work
85Cooler carrying wheel sealing plate replacement during shutdown dia Ø127mm (includes complete dismantling /fixing of new plate, welding, cutting & any small modification works if required)
86Cooler drive shaft sealing plate replacement during shutdown dia Ø200mm (includes complete dismantling /fixing of new plate, welding, cutting & any small modification works if required)
87Replacement of breaker hammer (includes dismantling of hood, cutting, wedling & tightening of bolts, etc., and finishing works to start the plant smoothly)
88Replacement of grizzly bars ( (includes dismantling of hood, cutting, wedling & tightening of bolts, etc., and finishing works to start the plant smoothly)
89Cooler drag chain conveyor maintenance works during shutdown
90Replacement of drag chain links and pins
91Replacement of pins
92a. Cooler inclined roof with brick holding/castable arrangment, b. Preduster roof with brick holding frame/ castable arrangment, c. TA duct roof with brick holding frame/ castable arrangmentworks.d) Cooler & preduster side walls and top roof with brick holding frame/castable arrangmentduring shutdown and finishing works to start the plant smoothy, etc.,
93Replacement of Dead grate plate, top dead grate plate, 25mm grate plate, 25mm half grate plate 13mm grate plate 13mm half grate plate & side casting (Includes removal/fixing of grate plate, cutting, welding, tightening of bolts, & finishing works to start the plant smoothly, etc.,)
94Replacement of carrying wheel & drive crosshead wheel with bearing & assemblyand rail replacement work
95Preheater all Cyclone feed pipe & cyclone Maintenance work
96Redspot patch box provision (includes Anchor welding, castable & welding etc.,)
97Feed pipe replacement work 600 -800mm (approx) with castable up to 25Mtr(include cuttiing, welding dismantling, erection works & finishing works to start the plant & etc.,)
98Feed pipe replacement work Dia 600 -800mm (approx) with castable above 25Mtr (include cutting, welding dismantling, erection works & finishing works to start the plant & etc.,)
99Feed pipe Patch replacement(includes Anchor welding, castable, welding & finishing works etc.,)
100All Cyclone cylindrical portion, Riser duct portion, inlet tangential portion, bottom cone portion Patch work (includes Anchor welding, castable, welding & finishing works etc.,)
101Replacement of coal mill balls & rings
102Redspot patch box provision (includes Anchor welding, castable & welding etc.,)
103Feed pipe replacement work 600 -800mm (approx) with castable up to 25Mtr(include cuttiing, welding dismantling, erection works & finishing works to start the plant & etc.,)
104Cement mill works
105Gear box oil pump replacement
106Mill inlet and outlet bearing oil pump replacement
107Oil filters replacement
108Water pump replacement
109Girth gear grease spray pump replacement
110FixingofCGISheetswith cladding and angles
111Coal Pipe at Kiln and Coal Mill Section
112Coal firing pipe at kiln platform Dismantling and shifting&Erection, alignment and finishing work
113ReplacementofAirslide cloth in VRM,Kiln and Cementmill and packing plantsection during shutdown.
114Limestone / Coal Reclaimers : Buckets and Chain linkreplacement & repairing during shutdown
115Buckets fabrication work
116Bucketsrepair/straighteningto shape
117Replacement of reclaimer chain link
118Replacement of Idlers & belts of Belt Conveyor From 650 mm to 1200 mm size Belt conveyor during shutdown.
119Dismantling and erection of Carrying / Troughing /impact Idlers
120Dismantling and erectionof Return Idlers
121ReplacementofBelt conveyor belts from 650mm to 1200mm
122Welding and patch repairatvariouselevations of the plant
123Dismantling and erection of Carrying / Troughing /impact Idlers
124Dismantling and erectionof Return Idlers
125ReplacementofBelt conveyor belts from 650mm to 1200mm
126S.S./ Alloy steel ANCHOR
127Fabrication of Anchor
128welding of anchors
129Cementmill/Packingplant Chain BucketElevatorworks
130Gear box oil pump replacement
131Mill inlet and outlet bearing oil pump replacement
132Oil filters replacement
133Water pump replacement
134Girth gear grease spray pump replacement

AI Tender Summary

OUR REF NO 34149496
AUTHORITY Boards / Undertakings / PSU
TENDER VALUE Ref. Documents
LAST DATE 12-10-2022
Authority
Authority Name Cement Corporation Of India Limited
Work Description Annual Contract For Plant Maintenance Jobs
Basic Detail
Tender No TCF/MECH/07/3078/22
Bidding Type Tender
Location
City tandur
State Telangana
Key Dates
Publish Date 28 Sep 2022
Submission Date 12 Oct 2022
Open Date 13 Oct 2022
Finance
Tender Value Ref. Documents
Tender Fee Ref. Documents
EMD 2 Lakhs
Exemption Not Available
Document List
3311f072-7f74-4bd5-b1ae-26d23b606c92.html
BOQ_142585.xls
etenderdoc.pdf
Techno_bid.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 28, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 12, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 13, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

3311f072-7f74-4bd5-b1ae-26d23b606c92.html

xls

BOQ_142585.xls

pdf

etenderdoc.pdf

xls

Techno_bid.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender