Source Strengthening Of Lwss Paini Khad To Chowassigarh In Gp Mahog, Kuther, Pokhi And Navidhar Bag Tehsil Karsog Distt. Mandi ( Hp ) Co Rcc Circular Storage Tank 20000 Liters Capacity 3 Nos. Under Jjm
Tender Value
7.04 Lakhs
Estimated cost
Bid Submission
05 Oct 2022
0 days left
EMD
14100
Bank guarantee accepted
Document Fee
250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
chhatri → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Source Strengthening Of Lwss Paini Khad To Chowassigarh In Gp Mahog, Kuther, Pokhi And Navidhar Bag Tehsil Karsog Distt. Mandi ( Hp ) Co Rcc Circular Storage Tank 20000 Liters Capacity 3 Nos. Under Jjm
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches etc.in earth work in all kind of soil such as pick work,jumper work,saturated soil including bailing or pumping out water,blasting soft./hard rock ,chiselling soft/.hard rock where blasting is prohibited in all lifts including trimming and dressing of sides,levelling of bed,stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm.layers including consolidatingeach deposited layer by ramming ,watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring,strutting,timbering and dewatering where ever required as per direction of the Engineer-in-Charge. |
| 2 | Providing and laying cement concrete 1:3:6(1cement:3sand:6 crushedstone agg. 40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts. |
| 3 | Providing and laying cement concrete 1:1.5:3(1cement:1.5 sand:3 crushed stone agg.20mm nominal size )& curing complete excluding the cost of form work and reinforcementfor reinforced concrete work in: |
| 4 | In foundation and plinth in all leads and lifts. |
| 5 | Walls ( any thickness but not less than 0.1 m thickness) attached pillasters,buttresses, plinth and string courses, etc. from top of foundation level upto floor two level in all leads and lifts |
| 6 | Providing and laying cement concrete 1:2:4 (1cement:2sand:4 crushed stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement and reinforced concrete workin:- |
| 7 | Suspended floors,roofs,landing and shelves and their support balconies,beams,girders,bressumers,and cantilivers upto floor two level in all leads and lifts. |
| 8 | Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish includingcentring, shuttering ,strutting and propping etc. with wooden battens and ballies height of propping and centring below supporting floor to ceiling in all heights and removal of the same for insitu reinforced concrete and plain concrete workin:- |
| 9 | Vertical surfaces such as walls(any thickness) partions and the like including attached pillasters,buttresses plinth and string courses and the like in all leads and lifts |
| 10 | Flat surfaces such as soffits of suspended floors,roofs,landings and the like floors etc.upto 200mm in thickness in all leads and lifts. |
| 11 | Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts. |
| 12 | White washing with lime on undecorated wall surfaces two coats to give an even shade including thoroughly brooming the surface to remove all dirt , dust and other foreign matters in all leads and lifts. |
| 13 | Providing and Fixing of 3.15mm MS sheet Manhole cover 600X600 mm with locking arrangement in all leads and lifts. |
| 14 | Laying,jointing and testing in trenches GMS tubes (light grade) tube fitting such as bends, tees, air valves,unions and collars etc. as per direction and to the entire satisfaction of the Engineer-In -Charge. (Earth work in trenches to be measured and paid for separately ). |
| 15 | 40 mm dia. |
| 16 | Providing and fixing Cast iron/sand cast iron spun spigot ventilating pipe (lead caulked joints to be measured and paid for separately) 100mm dia,in all leads and lifts. |
| 17 | Providing and Fixing Cast ironCowl 100 mm nominal diameter in all leads and lifts. |
| 18 | Providing and fixing Gun Metal wheel valve (with hand wheel) as per specificatin of the the Engineer-in-Charge in all leads and lifts 40mm dia in all leads and lifts. |
| 19 | Providing and fixing of 1.80 metre high fencing with 2.50 metre angle iron posts 40x40x5mm 2.50 metres centre to centre with nine horixontal lines and two diagonal of galvanised mild steel barbed wire (IS: 278-1962 Type-I) weighting 9.38kg/100 metres (Minimum) strained and fixed WITH m.s. angle post embeded in cement concrete 1:4:8 (1cement:4 sand:8 gradedstone aggregate 40mm nominal size)(earth work to be measured and paid for separately in all leads and lifts. |
| 20 | MS Sheet sliding shutters with frame and diagonal braces or 40mmX40mmX6mm angle iron 3.15 MS gusset plates at junctions and corners 25mm dia pully 40mmX40mmX6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of red lead paint in all leads and lifts. |
AI Tender Summary
Tender Timeline
Sep 28, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender