Tender For Iec For Awareness Of People Along Adi Ganga Pollution Abatement Of Tollys Nullah.-2 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Includin, Kolkata-West Bengal

Tender For Iec For Awareness Of People Along Adi Ganga Pollution Abatement Of Tollys Nullah.-2 Plaster ( To Wall, Floor, Ceiling Etc. ) With Sand And Cement Mortar Including Rounding Off Or Chamfering Corners As Directed And Raking Out Joints Including Throating, Nosing And Drip Course, Scaffolding / Staging Where Necessary ( Ground Floor ) . [ Excluding Cost Of Chipping Over Concrete Surface ] ( Ii ) With 1:4 Cement Mortar ( A ) 20 Mm Thick Plaster 3 Priming One Coat On Timber Or Plastered Surface With Synthetic Oil Bound Primer Of Approved Quality Including Smoothening Surfaces By Sand Papering Etc. ( This Item Is Applicable To New Work Or Old Work When The Original Surface Has Been Exposed By Removal Of Old Paint. ) 4 Painting With Best Quality Synthetic Enamel Paint Of Approved Make And Brand Including Smoothening Surface By Sand Papering Etc. Including Using Of Approved Putty Etc. On The Surface, If Necessary : ( A ) On Timber Or Plastered Surface :With Super Gloss ( Hi-Gloss ) - ( Iv ) Two Coats ( Withany Shade Except White ) 5 Printing New Letters And Figures Of Any Shade Printing New Letter And Figures Of Any Shade With Synthetic Enamel Paint Black Or Any Other Approved Colour To Give An Even Shade As Per Drawings And Technical Specification Clause 801 Of Specifications For Road & Bridge Works Of Mort&H ( 5Th Revision ) . I ) Hindi ( Matras Commas And The Like Not To Be Measured And Paid For. Half Letters Shall Be Counted As Half Only ) 6 Making One Set Of Scaffolding Only For Replacing Glass Panels, Painting, Uprooting Plant And Another Repairing Works Of Building And S&P Works For External Works Only With 10 Cm. Dia Bamboo As Main Posts At The Rate Of 1 Metre Centre To Centre And7.5 Cm. Dia Bamboo Ties @ 0.75 Metre Apart Fitting And Fixing With Necessary Coir, Nails Etc. As Per Direction Of The Engineer-Incharge. ( This Item Should Be Executed Only After Prior Approval Of The Engineer-Incharge ) . Firstly, One Number To Be Paid And Then Labour Rate For Shifting Up To Further Nineteenth ( 19 ) Times @ 10% Each Time To Be Considered. If Necessary Further After Twenty Times Of Total Use, Another One Number New And Labour Rate For Shifting To Be Consideredaccordingly A ) 3.90 Metre Height

Refer document

INR 20000.0 /-

INR 9.47 Lakhs /-