Construction Of Various Deposit Works Under Jsv Sub-Division Tihra In Tehsil Dharampur Distt. Mandi ( Hp ) ( Sh:- 1. C / O Saheed Smark Tihra At Bandal ( Vkv / 2022 / 195 ) , 2. C / O Ex Servicemen Csd Counter Tihra At Bandal ( Vkv / 2022 / 195 ) ,
Tender Value
24.96 Lakhs
Estimated cost
Bid Submission
03 Oct 2022
0 days left
EMD
44946
Bank guarantee accepted
Document Fee
400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
tihra → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Various Deposit Works Under Jsv Sub-Division Tihra In Tehsil Dharampur Distt. Mandi ( Hp ) ( Sh:- 1. C / O Saheed Smark Tihra At Bandal ( Vkv / 2022 / 195 ) , 2. C / O Ex Servicemen Csd Counter Tihra At Bandal ( Vkv / 2022 / 195 ) , 3. C / O Combined Building At Sajao Piplu ( Vkv / 2022 / 841 ) , 4. C / O Community Bhawan At Sajao Piplu ( Vkv / 2022 / 157 ) , 5. Improvement Of Lwss Noun Tanihar Prov. Anti Erosion Measures Along The Rising Main Near Vill. Bid Rd 0 To 10 Mtrs. ( Bsp / 2021 / 17 ) , 6. Improvement Of Lwss Noun Tanihar Prov. Anti Erosion Measures Along The Rising Main Near Vill. Bid Rd 10 To 19 Mtrs. ( Bsp / 2021 / 19 ) , 7. R / O Lwss Rakhoh, Cholthara, Awah Devi & Tihra 2Nd Protection Work For Pump House ( Sdf / 2020 / 312 ) , 8. R / O Lwss Rakhoh, Cholthara, Awah Devi & Tihra 2Nd Interlock Tile Flooring At Pump House ( Sdf / 2020 / 313 ) , 9. R / O Lwss Dudal Sajao Piplu Rd 10 To 50 Mtrs. ( Sdf / 2020 / 323 ) , 10. R / O Lwss Dudal Sajao Piplu Rd 50 To 90 Mtrs. ( Sdf / 2020 / 324 ) , 11. R / O Lwss Rakhoh, Cholthara, Awah Devi & Tihra Protect Storage Tank Kango Ka Gehra )
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work, blasting work, chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed in all leads including lifts and soring/strutting timbering and dewatering where ever required as per thr direction and to the entire satisfaction of the Engineer-in-charge. |
| 2 | Cutting in earth work and disposal of excavated earth within all leads and lifts complete in all respect as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 3 | Providing form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs. and removal of the same for insitu- reinforcement concrete and plain concrete work in:- |
| 4 | Foundation footing bases of columns etc and mass concretecomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 5 | Flat surfaces such as soffits of suspended floors, roofs, landings and the like, Floors etc. up to any thicknesscomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 6 | Vertical surfacessuch as wall (any thickness) partitions and the like including attached pillasters, buttresses plinth and string courses and the likecomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 7 | Beam, cantilever, girders and lintels, Sides and soffits of beam, beam haunching, cantilever, bressumers and lintels not exceeding 1 mtr. In depth in all heights from floor complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 8 | Columns, pillars, post and struts, Square, rectangular or polygonal in plancomplete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 9 | Edges of slabs and breaks in floors and walls under 20cm wide complete within all leads and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 10 | Providing and laying cement concrete 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation and plinth within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 11 | Providing and laying cement concrete 1:3:6 (1 cement :3 sand :6 graded stone agg. 40mm nominal size) On curing complete excluding cost of form work in foundation and plinthin all lead and lifts as per direction and to the entire satisfaction of the Engineer-in-Charge. |
| 12 | Providing and laying cement concrete1:2:4 (1 Cement : 2 Sand :4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work andreinforcement for reinforced concrete work in : - Walls any thicknessbut not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundationlevel upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 13 | Providing & Laying cement concrete work 1 : 1.5 : 3 (1 cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in:- |
| 14 | Foundation footing bases of columns etc and mass concrete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 15 | Walls any thicknessbut not less than 0.1m thickness including attached pillaster buttresses, plinth and string courses from top of foundationlevel upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 16 | Suspended floors, roofs, landing and shelves and their support, balconies, beams, girders, bressumers and cantilever upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 17 | Column, pillar, posts and struts upto floor two level as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts. |
| 18 | Lintels,beams, girders, bressumers and cantilevers upto floor two level within all lead and lifts as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 19 | Providing mild steel / Tor steel reinforcement for RCC work including bending binding and placing in position complete upto all floor level within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 20 | Brick work using common burunt clay building bricks in foundation anf plinthl in cement mortor 1:4 (1 cement : 4 sand) (2nd class brick) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 21 | Providing 40x3 mm iron hold fast 40 cm long including Fixing to frame with 10 cm da bolts nuts and wooden pluges and embencing in C.C. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 gradedstoneaggregate 20 mmnominal size) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 22 | Providing & fixing MS tower bolts (barrel type) with screws etc. within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 23 | 200 x10 mm |
| 24 | Providing and fixing MS sliding door bolt with bolt and nuts screws etc. within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 25 | 300 x 16 mm |
| 26 | Providing and fixing MS handleswith necessary screws. complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 27 | 100mm |
| 28 | Providing and Fixing oxidized MS Hooks and Eyes 150 mm with screws etc. within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 29 | Providing and laying Duro stone vetrified tiles(600x600x10mm) in grey/coloured or of approved shade in flooring,treadsofstepsandlanding laid on a bed of 12mm thick cement mortar1:3(1cement:3sand)laid overandjointedwithneatcement slurryfinishedwithflushpointingin whitecementmixedwithpigment of required shade to match the shade of tiles complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 30 | Providing and fixing 10mm thick anti skidwaterproofstainandimpect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mmmanufacturedof approvedshadeandcolourin flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3(1cement :3 sand)jointed with cement slurry mixed with pigment to match the shade oftilesas required complete within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 31 | 15 mm cement plaster in single coat on rough side of brick/concrete stone walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6 (1 cement: 6 sand) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 32 | Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete . |
| 33 | Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty a required for metling the surface within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 34 | 6mm cement plaster to ceiling in cement mortar 1:3 ( 1Cement :3 Sand) within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 35 | Steel work welded in built up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackets and similar works as per direction of Engineer-in-Charge upto all lead and lift. |
| 36 | Applying priming coat over new Steel and steel based surface after and I/c preparing the surface by thoroughly cleaning oil, grease,dirt and other foreign matter with ready mixed paint other than white as per the direction and to the entire satisfaction of Engineer-in-charge . |
| 37 | Painting two coat (excluding Priming coat ) on new steel and other metal surface with enamal paint brushing to give an even shade I/c cleaning of all dirt dust and other foreign matter with silver paint as per direction and to the entire satisfaciton of Engineer-in-charge upto all lead and lifts. |
| 38 | Providing and fixing vitreous china wash down water closet (European type W.C. Pan) with integral \"P\" or \"S\" trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) (seat and cover to be measured and paid for separately). (Asian Paints Make one piece) |
| 39 | Providing and fixing C.P. brass pillar tap with Capson Head 15mmwithin all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 40 | Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outletconnection, 15mm nominal bore ball valve and mosquito proof PVC cover with lockingarrangement including hoisting up to all heights above ground level :-1000 litres net capacity tank within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 41 | Providing and fixing to wall, ceiling & floor, galvanised mild steel tube (Heavy Class), tube fittings & clamps i/c making good wall, ceiling and floor within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 42 | 20mm dia Nominal Bore TATA Make |
| 43 | 15mm dia Nominal Bore TATA Make |
| 44 | Providing and Fixing 100 mm dia cast iron plated grating of superior quality for floor, gully or Nahni trap within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 45 | Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 75mm Nominal bore within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 46 | Providing and fixing C.P. brass angle cock 15mm without Nuts and pipe within all leads and lifts as per direction and to the entire satisfaction of the Engineer in Charge. |
| 47 | Providing and laying no fine cement concrete 1:6 (1 Cement : 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in cement mortar 1:6 as per direction and to the entire satisfaction of Engineer-in-Charge. |
| 48 | Providing and fixing precast concrete manhole cover and frame, conforming to IS 12692-2002, 560mm dia completeas per direction and to the entire satisfaction of Engineer-in-Charge. |
| 49 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 50 | Providing and fixing Stone Sclupture/Statue of Indian Army Veteran of 6 feet height within all lead and lifts |
| 51 | Wiring for light point / fanpoint /exhaust fan /call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. |
| 52 | a)Group A. |
| 53 | b)Group C. |
| 54 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required. |
| 55 | Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required. |
| 56 | Supplying and fixing of following sizes of PVC conduit along with the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required:- |
| 57 | a) 20mm dia |
| 58 | b) 25mm dia |
| 59 | Supplying an drawing following sixe of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existin surface/recessed, Steel.PVC conduit as required. |
| 60 | a) PVC insulated HRFRLSCopper conductor 1.5 Sq.mm. 3x1.5 Sq. Mm. |
| 61 | b) 3x4.0 Sq. mm. |
| 62 | Supplying abd erection of 6amps. To 32 amps. Rating, 10 KA breaking capacity, 240 volts, \"C\" curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- |
| 63 | a) Single pole, Cat-A. |
| 64 | Supplying and fixing following ratring, double pole (sinle phase & neutral) 240 volts, residual current fircuit breaker(RCCA), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 65 | b) 25 Amps. Cat-A. |
| 66 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface/recess, complete with tinned copper bus-bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plates, cable, identification labels interconnectionss, phosphatized, and powder painted,including earthing etc. as required. |
| 67 | a) double door-6 way |
| 68 | b) Double door-8 way |
| 69 | Wiring for light/power plug with 2x10 Sqmm PVC insulated copper conductor single core cable in surface/rcessed steel conduit along with 1 No. 10 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. |
| 70 | Wiring for circuit/sub-main 4x6 swmm size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) opper conductor cable in surface/recessed steel conduit along with 2 No. 6 sqmm.( 4x6+2x6) HRFRLS/PVC insulated single core copper conductorcable for earting as required. |
| 71 | Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required. |
| 72 | Exhaust Fan, Light duty, (Domestic) 225 mm sweep |
| 73 | Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and Fixing phenolic laminated sheet cover on the fan boxand earthing etc. as required. |
| 74 | Ceiling Fan 1400 mm sweep, Category-A |
| 75 | Extra for using salt and charcoal for G.I. or copper plate earth electrode completle as required. |
| 76 | Supplying and laying 8 SWG Copper wire at 0.50 mtr. Below ground level for earth electrode conductor, including soldering etc. as required. |
AI Tender Summary
Tender Timeline
Sep 27, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender