Military Engineer Services-MES has published Provision Of Glass Sensor Operated With Air Curtain Ge S U 51 2022 23 Provision Of Glass Sensor Operated With Air Curtain In Bldg No P01 Treatment Wingh At Cmdc, Addn Altn To Bldg No P11 At Ncsr And Provn Of Geyser At Bldg No P02 At Hqnc Kitchen At Dhruv. Submission Date for this Tender is 18-10-2022. Air Fittings and Connectors Tenders in udhampur Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Oct-2022 | 51BOQAMENDMENT01 | BOQ | 18-10-2022 |
| Sl. No. | Item Description |
| 1 | Demolition cement concrete in ground floors and paving ( unreinforced ) nexc. 15 cm thickness ( below or above ground floor) complete all as specified and as directed. |
| 2 | Dismantling wall and ceiling boards (fibre,pulp, insulation etc) or insulation boards any thickness including cover fillets complete all as specified and as directed. |
| 3 | Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish of the premises complete all as specified and as directed. |
| 4 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pilars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 5 | Demolition of reinforced cement concrete as in shelves, roof, floor (other than ground floor) beam, staircase, landing chajja and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed. |
| 6 | Dismantling stone slabs of any description and any position laid bedded and pointed in any mortar complete all as specified and as directed. |
| 7 | Dismantling of wooden boarding any description fixed in any position with screws complete all as specified and as directed. |
| 8 | Brick work with sub class "B" bricks straight or curved on plan exc. 6.00m mean radius built in cement mortor 1:6 complete all as specified and as directed. |
| 9 | Brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed. |
| 10 | Excavation in trenches, n exc 1.5 m wide and n.exc 1.5 m in depth; for foundation, & n exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard /dense soil, complete all as specified and as directed. |
| 11 | PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete, complete all as specified and as directed. |
| 12 | Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25mm in any type of soil complete all as specified and as directed. |
| 13 | Removing excavated material (soils) exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 14 | PCC 1:2:4 Type B-1(using20 mm graded crushed stoneaggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs etc complete all as specified and as directed. |
| 15 | Material and labour for providing Reinforced Cement Concrete design mix M-25using 20 mm graded aggregate as in foundation including rafts, footings,foundationbeams, plinth beams, bases of columns etc complete all as specified and as directed. |
| 16 | Material and labour for providing Reinforced Cement Concrete design mix M-25(using 20 mm graded crushed stone aggregates) as in columns, pillars, piers, posts and struts complete all as specified and as directed. |
| 17 | Material and labour for providing Reinforced Cement Concrete design mix M-25 (using 20 mm graded crushed stone aggregates) as in beams, cantilever, lintels over 1.5 m complete all as specified and as directed. |
| 18 | Material and labour for providing Reinforced Cement Concrete design mix M-25 using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floor, roof, landing, balconies, conopies, decks, slab and in shelves and like complete all as specified and as directed. |
| 19 | Use and wasteformwork to sides of concrete foundation footings base of coloumns sides and soffits (if any)of foundationandplinth beams,and similar work vertical or to batter for rough finished flat surface of concrete complete all as specified and as directed. |
| 20 | Use and wasteformworkto sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete complete all as specified and as directed. |
| 21 | Formwork to flat sides and soffits of or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and as directed. |
| 22 | Formwork to soffits of suspended flat slabs such as roof slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed. |
| 23 | Formwork to edges of concrete flats, treads breaks in floors, window cills, concrete railings,openings in concrete walls, floorand roofs n exc20cm wide and sides of RCC/PCC bands in wall, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and as directed. |
| 24 | Mild Steel TMT bars10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 25 | All as per srl item No.24above but 5mm dia and over including 10mm dia in stirrups, spacers and binders etc complete all as specified and as directed. |
| 26 | Rendering 10 mm thick on fair faces of brick /concrete surfacesin cement mortar 1:6 and finishedeven and smooth without using extra cement complete all as specified and as directed. |
| 27 | Rendering 15 mm thick in two layers (10mm + 5mm) on fair faces of brick/concrete or stone surfacesin cement mortar 1:4 and finishedeven and smooth without using extra cement complete with water proofing compound complete all as specified and as directed. (WPC shall be measured separtely). |
| 28 | Supply only Liquid water proofing compound complete all as specified and as directed. |
| 29 | Rendering 05 mm thick CM 1:4 on fair surfaces of ceiling work and finished even and smooth without using extra cement complete all as specified and as directed. |
| 30 | Rendering 15mm thick in CM 1: 4 on fair faces of brick work or concrete surfaces for backing coat for tiles complete all as specified and as directed. |
| 31 | Glazed coloured ceramic tiles in vertical surface 300mm x 600mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface complete all as specified and as directed. |
| 32 | Shingle filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering complete all as specified and as directed. |
| 33 | Hardcore of broken stone or boulders of gauge not exc 63mm and deposited spread and levelled in layers not exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed. |
| 34 | 75 mm thick cement concrete (1:4:8) type D-2 as subbase to floor complete all as specified and as directed. |
| 35 | 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in floor and finished even and fair complete all as specified and as directed. |
| 36 | 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes complete all as specified and as directed. |
| 37 | Non-skid coloured ceramic tiles (square/rectangular) 7 to 8 mm thick, area of each tileexc 0.11 sqm but not exc 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or colouredcement to match the surface, complete all as specified and as directed. |
| 38 | Screed bed or bedding layer of mortar 20mm thick in cement mortar 1:4 laying floor finishes complete all as specified and as directed. |
| 39 | Dura stone tiles of size 305mm x 305mm x 10 mm thick as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the surface of tiles complete all as specified and as directed. ( Note :Shade/colour as approved by GE) |
| 40 | Double charged vitrified ceramic tiles, area of each tileexc 0.36 Sqmbut n. exc. 42 Sqm , 10mm thick (square or rectangular) of superior quality as in floor and walls surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the light shade of tiles complete all as specified and as directed. |
| 41 | All as per item No. 40 above but on dado/skirtings complete all as specified and as directed. |
| 42 | Dismanttling of plain or corrugated steel sheetings any thicness as in roof coverings complete all as specified and as directed. |
| 43 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mmthick crimpted/tapard at the external end slope ofany colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws and caps etc complete all as specified and as directed. |
| 44 | Plain galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick in ridges, hips, valley gutters at the external end slop of any colour having tansile strength 550 Mpa as in roof(ridges) covering fixed with self tapping screwsand caps etc complete all as specified and as directed. |
| 45 | 75 mm thick plain cement concrete, 1:3:6 type C-2, (using 40 mm graded crushed stone aggregates) as in plinth protection complete all as specified and as directed. |
| 46 | Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar any description complete all as specified and as directed. |
| 47 | Rendering 15 mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed. |
| 48 | Preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etcand applying two Coats of Acrylic emulsoinpaint over a coat of primer complete all as specified and as directed. |
| 49 | Applying one coat birla wall care putty on newly plastered wall surfaces including preparation of surface by brooming down or steel wire brushing, scrapping downvegetation growth, efflorscent salts and trading oil and greasy spot complete all as specified and as directed. |
| 50 | Applying two coats of Acrylic emulsion paint on old plastered surfaces complete all as specified and as directed. |
| 51 | Two coats of distemper oil emulsionover a coat of primer including preparation of new plstered surfaces of wallscomplete all as specified and as directed. |
| 52 | Two coats of distemper oil emulsionincluding preparation of old plstered surfaces of wallscomplete all as specified and as directed. |
| 53 | 6 mm thick non asbestos fibre cement buildingdesigner boards or tiles fixed in ceiling of size 600mm x 600mm panel confirming to IS 14862 , including aodised aluminium snap grid frame work with size of grid 605 mm x 605mm for seamless ceiling comprises of aluminium perimeter l section members, including fixing with 4mm thick GI wire adjustable suspenders including all accessories complete all as specified and as directed. Make : Everest. |
| 54 | Dismantling wrought iron or mild steel work of any description not otherwise provded for complete all as specified and as directed. |
| 55 | Angles for roof truss with purlin, rafter, struts and post and fixed with angle cleats or other connecting plates conforming to Gde Fe 410-0 or Fe-310-0 complete all as specified and as directed. |
| 56 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide chrome primer complete all as specified and as directed. |
| 57 | Taking down chowkats or frame with shutter (without taking of shutter off shutters from frame) exc. 1.5 sqm but n exc 4 sqm each complete all as specified and as directed. |
| 58 | Taking down chowkats or frame with shutter (without taking of shutter off shutters from frame) n exc 1.5 Sqm each complete all as specified and as directed. |
| 59 | Aluminium powder coated frame suitable for sliding/openable/fix, partition, doors, windows, ventilator, guard bar, grill and similar work with one or more rebatesincludingjoining cleat for fixing etc complete all as specified and as directed. |
| 60 | Aluminium powder coated door shutters, aluminium section weighing 0.55 Kg/m including necesssary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door hinges, sliding bolt and tower bolts anodised aluminium snap beading screws etc complete all as specified and as directed. |
| 61 | Powder coated aluminium anodised window and ventilator shutters, side hung type without sash bar, aluminium section weighing 0.55 kg/m including necessary jointing cleat glazing clips, rubber packing, anodised aluminium snap beading screws etc.including all fittings. complete all as specified and as directed. |
| 62 | Sheet glassquality 5 mm thick (tinted/one side view glass) in squares n. exc 0.5 sqm each pane and glazing including all fittingcomplete all as specified and as directed. |
| 63 | Fixing only 10mm thick toughened glass as in railing fixed type including necessary fixings such as silicon gell or other fixing clips clamps, complete all as specified and as directed. |
| 64 | Aluminium mortice lock vertical type size 100 mm brass 4 lever etc complete all as specified and as directed. |
| 65 | Double action floor sprig hydraulically regulated made up of min 1.25 mm thick aluminium steel foundation box, main body with stainless steel covering pivot made of brass other parts made of mild steel heavy duty complete all as specified and as directed. |
| 66 | 20mm thick granite (of any type) machine cut as in shelves etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing complete all as specified and as directed. |
| 67 | 20mm thick granite (of any type) machine cut as in dado/skirtings etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing complete all as specified and as directed. |
| 68 | M & L forsand cushioning/filling under floors or laying interlocking tiles complete all as specified and as directed. |
| 69 | Machine pressed precast concrete interlocking paver blocks lacquor finish any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade of approved ISI Make by GE with grey cement and pigment complete all as specified and as directed. |
| 70 | Backing coat of cement mortar 15mm thick in 1:3 to receive tiles in vertical surfaces complete all as specified and as directed. |
| 71 | Wall cladding colour designer tiles of size 300mm x 600mm x 7mm thick (shade as approved by GE) set and jointedin neat cement slurry and laid over screed bed/backing layer of 10mm thick in cement mortarand pointed in white/coloured cement to match the colour of tiles as on vertical surfaces such as dado/skirtings complete all as specified and as directed. |
| 72 | Taking down aluminium door/window shutters form frame repair to shutter and frame and making good and serviciable and refixing to existing frame including fixing to rubber kit, handle, and similar items etc complete all as specified and as directed. |
| 73 | M&L for spot welding in repair as in steel work such as window, door, ventilater, gate and santry post and similar work with running welding including greasing and oiling complete all as specified and as directed. |
| 74 | Stainless steel pipes as in framing for fixing of railing including fixing of10mm thick toughened glass on frame as per site requirement conforming to Gde 304, complete all as specified and as directed. (Note : Toughened glass will be measured and paid separatly). |
| 75 | Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed. |
| 76 | Factory made 35mm thick 2nd class hard wood,plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and as directed. |
| 77 | 35 mm thick second class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded,fitted with cut and mitred beads for securing glass etc., sizes of members of shutterscomplete all as specified and as directed and as specified in relevant SSR. |
| 78 | PVC moulded door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and as directed. |
| 79 | Supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and as directed. |
| 80 | Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and as directed. |
| 81 | 100mm size mildSteel butt hinges medium weight cold rolled complete all as specified and as directed. |
| 82 | 150mm longAluminium anodisedbarrel tower bolt of extruded section complete all as specified and as directed. |
| 83 | 150 mm lengthAluminiumhandles fabricated type anodised complete all as specified and as directed. |
| 84 | Sheet glass 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane up to G+2 height bldg complete all as specified and as directed. |
| 85 | Sheet glass 4mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as specified and as directed. |
| 86 | Framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed. |
| 87 | Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and as directed. |
| 88 | Preparation of new woodensurfaces of any description ,not other wise described over 10 cm width or girthapplying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 89 | 300 mm long aluminiumalloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets ,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and as directed. |
| 90 | MS 300 mm ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and as directed. |
| 91 | Floor door stoper (140mm length) of aluminium alloy body complete all as specified and as directed. |
| 92 | Door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium(extruded section) body complete all as specified and as directed. |
| 93 | Pre-laminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed. |
| 94 | 18/19mm thick block board, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work/iron frame work(Termite treated / water proof) . (Make:Green Ply/Kit ply ) complete all as specified and as directed. |
| 95 | 2nd class HW plain fillets square/rectangular or triangular in section clean sawn ,secured with nails or brads exc 3 sq cm but n exc 6 sqcm complete all as specified and as directed. |
| 96 | 0.9 mm thick decorative choice of laminationtype -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and as directed. |
| 97 | Hasp & staple 100mm size aluminium anodised fixed with screws complete all as specified and as directed. |
| 98 | Continous (Piano) hinges, mild steel, bright finished or electro galvanised width of flaps in 30mm complete all as specified and as directed. |
| 99 | 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved qualitycomplete all as specified and as directed. |
| 100 | Stain less steel catcherof superior quality complete all as specified and as directed. |
| 101 | 50mm stain less steel pivoted type hingesof superior quality complete all as specified and as directed. |
| 102 | Steel rolling shutters 1.25mm thick, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete:push pull or manual type complete all as specified and as directed. |
| 103 | Sinks with drainage board made of stainless steel 1 mm thickkitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed. |
| 104 | Water closet wall mounted pattern pattern colour 535mm x 380mm x 400mm(as approved by GE) complete all as specified and as directed. Make CERA CAT PART No (S1041109 P trap,) , Seat coverB1510108 Clair seat cover, |
| 105 | WHB coloured 550mm x 480mm with Pedestal Make CERA Cat No (S2040115 & S2090111) (as approved by GE) complete all as specified and as directed. |
| 106 | 15mm bore centre hole basin mixerwith round spoutwith 450mm long copper pipes and brass nuts with out Pop up complete all as specified and as directed. Make: JaquarCat Part No CON 167KNB and equvalent in CERA. |
| 107 | 15mm bore long body Bib tap complete all as specified and as directed. Make Jaquar Cat Part No CON-037KN and equvalent in CERA. |
| 108 | 15mm bore Bib tap complete all as specified and as directed. Make Jaquar Cat Part No CON 107KN and equvalent in CERA. |
| 109 | 15mm bore angular stop cock with wall flange complete all as specified and as directed. Make: Jaquar Cat Part No CON- 059KN and equvalent in CERA. |
| 110 | Health faucetABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and as directed. Make : CERA Cat Part No F8030103. and equvalent in CERA. |
| 111 | Chromium plated toilet paper holder complete all as specified and as directed. Make Jaquar Cat Part No ACN 1153N and equvalent in CERA. |
| 112 | Glass shelfwith chromium plated guard rails complete all as specified and as directed. Make JaquarCat Part No ACN-1171N and equvalent in CERA. |
| 113 | 600mm long brass chromium plated towel rail fancy type complete all as specified and as directed. Make Jaquar Cat Part No ACN-1111NM and equvalent in CERA. |
| 114 | Soap dish complete all as specified and as directed. Make Jaquar Cat Part No ACN 1131N and equvalent in CERA. |
| 115 | Towel rack complete all as specified and as directed. Make Jaquar CAT Part No ACN 1181FN and equvalent in CERA. |
| 116 | Double Coat hook complete all as specified and as directed. Make :-Cat Part No ACN 1161N and equvalent in CERA. |
| 117 | Looking mirror 5 mm thick with bevelled edge with and including four SS spacers of selected quality size complete all as specified and as directed. |
| 118 | Rotational moulded polyethylene water storage tanks 500 ltr (cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified and as directed. |
| 119 | Rotational moulded polyethylene water storage tanks 1000 ltr (cylindlerical verrtical with closed top) hoisted and fixed in position all as specified in SSR part I inclding dismantaling of existing damaged water tanks complete all as specified and as directed. |
| 120 | PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipes(Min weight 210 gms) and fixed to iron pipes complete all as specified and as directed. |
| 121 | Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and as directed. |
| 122 | Taking up or down of 15/20 mm bore pipes steel tubing and connections complete all as specified and as directed. |
| 123 | Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,15mm bore.including taking down old pipe complete all as specified and as directed. |
| 124 | Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore including taking down old pipe complete all as specified and as directed. |
| 125 | Refixing old steel water tubing 15 mm bore medium grade galvanised and connections in new or old position (walls, ceiling,floor etc.) complete all as specified and as directed. |
| 126 | Refixing old steel water tubing 20 mm bore medium grade galvanised and connections in new or old position (walls, ceiling,floor etc.) complete all as specified and as directed. |
| 127 | 40 mmwaste coupling of PTMT ( half or full threaded) (Min weight 60 gms) complete all as specified and as directed. |
| 128 | 40 mm dia PVC wastepipe for sink and wash hand basin of pressure rating 10 kgf/Sqm complete all as specified and as directed. |
| 129 | PVC (SWR) Floortrap, 75 mm dia of outlet, plain with grating including jointing with solvent cement including removing old trap and making good complete all as specified and as directed. |
| 130 | 110 Bore PVC (SWR)Pipes in repairs single socketed in any lenth with rubber ring joints fixed to walls complete all as specified and as directed. |
| 131 | 75 mm Bore PVC ( SWR) Pipes in repairs single socketed in any lenth with rubber ring joints fixed to wall complete all as specified and as directed. |
| 132 | PVC (SWR) bends any radius 75 mm bore complete all as specified and as directed. |
| 133 | PVC (SWR) bends any radius 110 mm bore complete all as specified and as directed. |
| 134 | PVC connection 15mm dia and 45cm long with two Nosof PTMT checknuts and washers complete all as specified and as directed. |
| 135 | PVC bathroom cabinet mirror 450 x 350 mm (Prayag Cat Part No 557) with door fitted with looking mirror complete all as specified and as directed. |
| 136 | Supply and fixingvitreous china squattingpan, Orissa pattern of size 580mm x 440mmwhite with integral foot rests excluding flushihng cistertn and flush pipe complete all as specified and as directed. |
| 137 | Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe complete all as specified and as directed. |
| 138 | WHB vitreous china (flat back or angle back type ) any size ,including cutting for pinning in ends size 550x400 mm including brackets ,32 mm CP waste fittings coupling ,connection pipe 450mm long and 15mm dia CP piller taps fancy type complete all as specified and as directed. |
| 139 | 10 ltr capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified and as directed. |
| 140 | Vitreous china bowl urinal flat back, size 465mm x 355mm x 265 mm white (min) with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and as directed. |
| 141 | Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device (Make CERA )any type of EWCcomplete all as specified and as directed. |
| 142 | 15mm pillar tap cast copper alloy with capstan head ,chromium plated screwed down high presure with or with out lettered fixed with iron pipe complete all as specified and as directed. |
| 143 | 15mm stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed. |
| 144 | Bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15mm fixed complete all as specified and as directed. |
| 145 | CP bib taps disc fitting facehalf turn or full turn suitable for bib taps and similar work complete all as specified and as directed. |
| 146 | 20mm dia mild steel powder coatedtubular curtain rail with brackets complete all as specified and as directed. |
| 147 | 10-12mm thick gypsum boards seamless false ceiling as in ceiling plain, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of emulsion paint over a coat primer on exposed surface, complete all as specified and as directed. Note : (a) Design of ceiling board as approved by GE. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer. |
| 148 | 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and as directed. |
| 149 | Roughening surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc including taking down tarfelt and brushing neat cement slurry @ 3 kg/Sqm including 10mm thick plastering in CM (1:3) finished even and smooth mixed with water proofing compound (WPC shall be measured and paid separately). Applying bituminous primer on roof surfaces @ 0.40 ltr/Sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 Kg/Sqm and provide modified polymeric five layred APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polyethylene film. Min wt of membrane will be 3.5 Kg/Sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm blinded with fine sand in dry condition @ 0.5 Kg/Sqm & including two coats of bituminous Aluminium paint, complete all as specified and as directed. |
| 150 | PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in PCC filling in MS chowkhat & base of water tank on roof surface complete all as specified and as directed. |
| 151 | Precast cement concrete louvers and jallies 45-50mm thick set in cement mortar 1:6, 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) etc sample as approved by GE including taking out old precast jali. complete all as specified and as directed. |
| 152 | Precast cement concrete jallies size 300mm x 300mm x 25-30 mm thick set in cement mortar 1:4, 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) etc fixed between precast pillars size 75mm x 75mm x 300 mm height, sample as approved by GE including taking out old precast jali complete all as specified and as directed. |
| 153 | Precast cement concrete jallies size 300mm x 450mm,25-30 mm thick set in cement mortar 1:4 type B-0 (1:2:4 using 12.5mm graded aggregate etc fixed between precast pillars size 75mm x 75mm x 450 mm height, sample as approved by GE including taking out old precast jali complete all as specified and as directed. |
| 154 | Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) for drain cover andother coversetc including necessary form work and set in CM (1:4) complete all as specified and as directed. (Note:- reinforcement will be measured and paid seperately.) |
| 155 | 6mm to 8 mm thick solid PVC lining / pannelling fixed with rowel screws fixed over PVC slits grid of 5 mm thick fixed over wall so as to provide base for over laping of lining and sealing the same at top and bottom complete all as specified and as directed. |
| 156 | 1mm thick stainless steel plate rack of size 900mm x 750mm of approvedmake and quality complete all as specified and as directed. |
| 157 | Wooden panelling on Vertical surfaces of wall using following specification : (a) Supply and fixing wooden Gutties 1st class hard wood of size 25mm x 25mm x 200mm depth fixed in wall by making holes in brick wall and making good in cement mortar 1:3. (b) S & F horizontal runners 2nd class soft wood (Kail) at 120cm c/c of section area exc 13sqcm and not exc 25sqcm clean sawn treated with two coats of cresote Oil mixed with good quality Pesticide for antitermite treatment. (c) S&F 1st class soft wood (Deodar) boarding 12 to 15mm thick as in wall panelling planed one side, wrought on other side clean sawn with tongue/groove joints and applying two coats of good quality Varnish after proper preparing by sand paper etc. on planed surfaces and a coat of Primer mixed with pesticide for Antitermite treatment on the other side and fixed with screws/nails on wooden runners. (d) S&F 1st class soft wood (Deodar) decorative beading 40mm wide on top (and bottom if required) surface of wall panelling including two coats of Varnishing complete all as specified and as directed. |
| 158 | French polishing on wooden surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old decorative surface complete all as specified and as directed. |
| 159 | Preparation of old decorative surface of wall and applying two coat of plastic emulsion paint with 1mm thick wall care Putty and surface will be carried out by roller and skilled painter (Shade approved by GE) complete all as specified and as directed. |
| 160 | Preparation of surface and applying textured painting (granular or impression type) , any colour andany positioncomplete all as specified and as directed. |
| 161 | Supply, fixing &installation of Automatic toughned glass sliding door system for commercial purpose with following specifications :- (i)Double-panelor single panel sliding door,Clear passage width 900 – 3000 mm,Max. door panel weight 2 x 130 kg,Passage height 2100 – 3000 mm (ii) Profile systems– G fine-frame profile – Full-glass profile with Flex double glazing – R frame profile– R-Thermo thermal profile, MANET single-point fixing,max. clear passage width (LW)single-panel = 1600 mmdouble-panel= 2000 mm – Full-glass fixing PURE, Operator height/depth 150 mm x 180 mm, (iii) Suitable for application in emergency exits and escape routes – Maximum opening and closing force 150 N Opening speed (adjustable) 10 – 75 cm/s,Closing speed (adjustable) 10 – 50 cm/s, Hold-open time 0 – 120 s,Supply voltage/frequency 230 V, 50-60 Hz, Power consumption 250 W, Class of protectionIP 20, Compliant with the Low Voltage Directive, Manufactured to ISO 9001:2000 |
| 162 | (iv)Control Panel - Modular design, Microprocessor control, Function programs - Off, Automatic,Permanent Open,Partial Open,Exit Only,Night-/Bank Function, Automatic reversing, Emergency opening / emergency closing – (only with rechargeable battery pack). (v) 10mm thick toughned safety glass with Flex fine frame profile - Attractive glass surfaces slender frames,High stability and torsional rigidity,Excellent insulation features inter-locking side seals and top and bottom seals. (vi) wall/lintel mounting operator 100/150mm. Emergency exit and escape route doors are equipped with a redundant operator, an additional control unit for safety purposes and a self-monitoring radar motion detector. Manufactured according to the latest state of technology and complete with all regulations. Make : Dorma/Fenesta or equivalent Note : Cost of transportation, labour, all connected fittings & fixtures (whether mentioned or not mentioned here in before) for smooth working of automatic door included. Nothing extra shall be paid to the contractor on quoted rates. |
| 163 | Automatic Air curtain 1.5 mtr wide fixed on top of the door wall mounted complete all as specified and as directed. |
| 164 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power/ LED Light fittings) complete fitting such as switch, sockets, ceiling rose, pendants socket any type, rectangular board terminal boxes etc and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed. Note :- Keeping the LED lights in safe custody. |
| 165 | Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good thedisturbed surfaces of walls,floors roofs etc complete all as specified and as directed. |
| 166 | Taking down Old/ Unserviceable MCBDBs TPN / Main Switchesby disconnection of electric connection including old unserviceableMCCBs, MCBs, isolators etc and making good to distrubed surface complete all as specified and as directed. |
| 167 | Disconnecting and taking down un serviceable light fittings of any description/ capacity complete all as specified and as directed. |
| 168 | Point wiring for one light/ fan/bell point controlled by oneswitch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making samethe wall patchs after layingthe wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish. |
| 169 | All as per srl item No 167 but for 3 pin 6 Amps socket outlet independent boardincluding PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed. |
| 170 | All as per srl item No 167 but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed. |
| 171 | All as per Srl item No 167 but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed. |
| 172 | Modular switch6 Amps single pole one way230 V, 50 Hz, AC , with outer strip complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 173 | Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer strip complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 174 | ModularBell push flush type 6 amp 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 175 | Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner covercomplete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 176 | Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush typewith outer/inner covercomplete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 177 | Ceiling rose, surface bakelite 65mm x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 178 | Calling Bell ding dong 230 volts single pole 50Hzcomplete all as specified and as directed. Make: Havells/ Legrand/Indoasian Elvira |
| 179 | Electronic step type fan regulator 120 watt 230 volts 50 C/S deluxe modular type complete all as specified and as directed. |
| 180 | Single pole and neutral enclosure surface mounted 240 volts with 2 pin and earth plug and socket with one single pole MCB 20 Amps with indicator complete all as specified and as directed. Make :- Wipro/Havells/Bajaj |
| 181 | S&F in replacement 36W (2" x 2") LED Ceiling/recess lightpanel for recess mounting warm white colour which provides soft-light and glare free symmetrical illumination complete all as specified and as directed. Make - Havells,/ Phillips/ Wipro. |
| 182 | Supply and fixing LED lights fitting 1x 20W, 230V,AC decorative box typewarm white colour with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 183 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative typewarm white colour with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 184 | Supply and fixing LEDbuilding securitylight fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitablebracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 185 | Supply and fixing LED luminaire 15 watt, 220 V AC recess mounted downlighter type with high efficiency PC diffuser soft lightand symmentrical illumination complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make-Havells/ Philips/C&S. |
| 186 | Supply and fixing LED luminaire 10 watt, 220 V AC recess mounted downlighter type with high efficiency PC diffuser soft lightand symmentrical illumination complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and as directed. Make-Havells/ Philips/C&S. |
| 187 | Supply and fixing Square shape 2" x 2",34 watt 220 volts AC surface mountedtypewarm white colour with high efficiencysoft lightand symmetricall illumination complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable sizecomplete all as specified and as directed. Make-Havells/ Philips/C&S. |
| 188 | Decorative wall mounting 1X4W nickle finish fixture with frosted glass along with 4W warm white bulb GLS lamp luminaire complete all as specified and as directed. Make-Havells/ Philips/C&S. |
| 189 | Sheet metal enclosure double door type for MCCB TPNDB upto 125 Amps, 4 wayvertical type 415 volts with 400 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. Make-Havells/ legrand/CG |
| 190 | S & F replacementMCCB Three Pole & Neutral capacity of 125 amps 415 volts rupturing capacity 16 KA complete all as specified and as directed. Make - Havells/ legrand/ CG |
| 191 | Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. Make:- Havells/ legrand/ Schneider. |
| 192 | Sheet metal enclosure MCB distribution boardsingle pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link,fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and as directed. (Note-MCBs will be measured separately) |
| 193 | S & F in replacement MCBsingle pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed. Make:-Havells/ legrand/ Schneider. |
| 194 | S & F in replacement MCBsingle poleand neutral 240 volt any rating from 63 Amps "C"series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed. Make:- Havells/ legrand/ Schneider. |
| 195 | Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable6 Sq mm as earth lead complete all as specified and as directed Including taking down old sub main wire. Make: Gloster/ Finolex/ Polycab. |
| 196 | Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable6 Sq mm as earth lead complete all as specified and as directed Including taking down old sub main wire Make: Gloster/ Finolex/ Polycab. |
| 197 | Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as specified in relevant SSR & shown in electrical plate No 5connected to main control board and testingon completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. Note: if earth resistance of earthing is not found (2 to 5 O) satisfactory if will be redone by the contractor on his risk and cost. |
| 198 | Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings andhanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring complete all as specified and as directed. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account. |
| 199 | Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc complete all as specified and as directed. |
| 200 | Supply and fixing exhaust fan, steel body AC single Phase 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed. |
| 201 | Supply and fixing Wall fan, AC single Phase. 230V of size 300m sweep with, blades, and frame along with all electrical wire connection complete all as specified and as directed. |
| 202 | Supply& Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmmx 3.5 coresize complete all as specified and as directed including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately. |
| 203 | Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard/dense soiland getting out complete all as specified and as directed. |
| 204 | Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed. |
| 205 | Removing excavatedmaterial (soil)to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the startingpoint complete all as specified and as directed. |
| 206 | Dry sand for cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured |
| 207 | Bricks sub class "B"brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed. |
| 208 | Supply and fixing GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and includingprovisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed. |
| 209 | Supply and fixing electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and as directed. Make:Havells/Racold/Bajaj |
| 210 | Supply and fixingPVC flexible connection graded suitable for hot water, 450mm long (Set of two) for inlet/outlet connections of geysers with heat resistance washers and nuts complete all as specified and as directed. |
| 211 | Supply and fixing 15mm bore GI pipe medium grade galvanised with all fittings and fixed complete all as specified and as directed. |
| 212 | Supply and fixing Bib cock brass chromium plated screwed down for size 15mm dia GI pipe complete all as specified and as directed. |
| 213 | Supply and fixing stop valve brass chromium plated screwed down for size 15mm pipe ISI marked complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
