|
| 1 | B/R SERVICES/WORKS |
| 2 | Surface Dressing not exc. 15 Cm Deep and getting out in Soft/Loose soil, complete all as specified and as directed. |
| 3 | Excavation in Over Areas not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed. |
| 4 | Excavation in Over Areas exc. 1.50 Metre and not exc. 3.00 Metre in depth and getting out as in Soft/Loose Soil, complete all as specified and as directed. |
| 5 | Excavation in Trenches not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out as in Soft/ Loose Soil, complete all as specified and as directed. |
| 6 | Returning, Filling in including Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm thick, in Soft/Loose Soil, complete all as specified and as directed. |
| 7 | Spreading, Levelling, Watering and Well Ramming in layers not exc. 25 Cm, in Soft/ Loose Soil, complete all as specified and as directed. |
| 8 | Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc 1.50 Metre above the Starting Point, complete all as specified and as directed. |
| 9 | M&L Hardcore Broken Stone or Boulders, Gauge not exc. 63mm, deposited, spread and levelled in layers not exc. 15 Cm thick, watered and well rammed to a True surface, complete all as specified and as directed. |
| 10 | M&L Treating the Bottom and Sides of Excavation at the Rate of 5.0 Litre of Emulsion Per Square Metre of Surface Area, complete all as specified and as directed. |
| 11 | M&L Treating the Top Surface of Filled Earth at the Rate of 5.0 Litre of Emulsion Per Square Metre of Surface Area, complete all as specified and as directed. |
| 12 | M&L Treating the Soil under Plinth Protection at the Rate of 5.0 Litre of Emulsion Per Square Metre of Surface Area, complete all as specified and as directed. |
| 13 | M&L Treating the Soil along with External Perimeter of Building at the Rate of 2.25 Litre of Emulsion Per Metre of the Perimeter Wall, complete all as specified and as directed. |
| 14 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregates) in Lintels upto 1.50 Metre Clear Span, Cills, Steps; Seismic and Other Similar Bands, Plinth Courses, String Courses, Lacing Courses, Parapets and Railings upto 600mm in Height, Copings, Kneelers, Apex Stones, Bed Plates, Water Troughs and the Like including Weathering, Slightly Rounded or Chamfered Angles and Throating, Finishing all Exposed Faces of Concrete including Use and Waste of Formwork as required/ ordered, complete all as specified and as directed.NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate. |
| 15 | M&L Cement Concrete 1:4:8 (40mm graded stone aggregates) in Foundation, Filling and Mass Concrete, etc. including necessary Formwork, complete all as specified and as directed.NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate. |
| 16 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregates) in Foundations of Manholes, etc. including necessary Formwork, complete all as specified and as directed.NOTE : Cost of Formwork will deemed to be included in the Quoted Unit Rate. |
| 17 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Founda-tion including Raft, Footing, Foundation Beam for Column Basement Slab, under reamed Piles, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 18 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) Columns, Pillars, Piers, Posts and Struts, etc., complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 19 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Beams, Cantilevers, Bressummers, Lintels Over 1.50 Metre Span and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 20 | M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregates) in Chajjas and the like, complete all as specified and as directed.NOTE : Reinforcement & Formwork will be Measured & Paid for separately under appropriate Items. |
| 21 | M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded aggregate) in Landings, Cover Slabs (for Manholes, etc.), Chullah Hoods, Water Troughs, Mangers, Shelves and Similar Articles with Plain faces and setting in Cement Morter 1:4, complete all as specified and as directed.NOTE : Reinforcement will be Measured & Paid for separately under appropriate Items. |
| 22 | M&L Machine Pressed Pre-cast Concrete Curve Stone in Cement Concrete 1:2:4 (20mm graded stone aggregate) of Size 200x200x125mm thick and grouting to Natural Earth including necessary Earthwork, complete all as specified and as directed.NOTE : Cost of Earthwork will deemed to be included in the Quoted Unit Rate. |
| 23 | M&L Formwork to Sides of Concrete Foundations, Footings, Bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of Foundation and Plinth Beams; and Similar Work; Vertical or to Batter, Rough Finished surfaces of Concrete Flat, complete all as specified and as directed. |
| 24 | M&L Formwork to Sides Pillars, Posts, Struts, Piers, Columns and Stanchions and Similar Work; Rough Finished surfaces of Concrete, Square, Rectangular or Polygonal, complete all as specified and as directed. |
| 25 | M&L Formwork to Sides and Soffits of Floor or Roof Beams, Girders, Beam Haunch-ings, Bress-summers, Lintels, Cantilevers, Shelves including Supports, Overhangs, etc. also splays between Floors and Beams, etc., Rough Finished surfaces of Concrete Flat, complete all as specified and as directed. |
| 26 | M&L Formwork to Chajjas, Chullah Hoods, Troughs and Similar Items including Edge, Rough Finished Surfaces of Concrete Flat, complete all as specified and as directed. |
| 27 | M&L Pre-cast Cement Concrete Block Masonry with Solid Blocks of Sizes 300x200x200mm or 300x200x100mm, having Compressive Strength of not less than 100 Kg/ Sq Cm (as per IS-2185) in Cement Concrete 1:3:6 (20mm graded stone aggregate), exc. 10 Cm in Width and Setting in Cement Mortar 1:6, complete all as specified and as directed. |
| 28 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 40mm thick in Damp Proof Courses to Horizontal or Vertical Surfaces including Use & Waste of Formwork and Applying Evenly a coat of Blown type Bitumen @ 1.50 KG/SQM and blinding with Clean Dry Sand @ 0.05 CUM/SQM, complete all as specified and as directed. |
| 29 | M&L Cutting Holes in Brick/ Pre-cast Concrete Block Walling, not exc. Half Brick thick, built in Cement Mortar for inserting of Holdfasts, Lugs, etc. and Making Good to Dismantled portion with Cement Concrete 1:2:4 (20mm graded stone aggregates) and adjoining Surfaces in Cement Mortar 1:4, complete all as specified and as directed. |
| 30 | M&L Second Class Hardwood (well seasoned) Plain, Solid, Straight, Chowkats and Frame, Wrought, Framed rebated on the Solid, Rounded or Chamfered, put together with Glue pinned at Joints, complete all as specified and as directed. |
| 31 | M&L Second Class Hardwood (well seasoned) Panelled Shutter 35mm thick (any number Panels) Plain, Framed with Lock Rails, having Panels of 12mm thick BWP, Commercial Ply or 12mm thick Veneered Particle Board Medium density, Wood Particle Board with Commercial Face Veneers and fitted to Chowkat, complete all as specified and as directed. |
| 32 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open rebated and prepared to receive Glass, Gauze, etc. (Without Sash Bars), Edges of Framing plain, chamfered or rounded. fitted with cut and mitred Beads for securing glass, etc.; Sizes of Members of Shutters as specified inSSR Part I, Section 8, Clause 8.24(b) and fitted to Chowkat, complete all as specified and as directed. |
| 33 | M&L Second Class Hardwood (well seasoned) Glazed and Skeleton Shutter 30mm thick, Open rebated and prepared to receive Glass, Gauze, etc., Divided into Squares, with plain, chamfered or rounded, mitred and rebated Sash Bars (any numbers), fitted with cut and mitred beads for Glass, Gauze, etc., Sizes of Members of Shutters as specified in MES Schedule Part-I, Section 8, Clause No. 8.24(b) and fitted to Chowkats, complete all as specified and as directed. |
| 34 | S&F Solid PVC Door Frame of Size 50x47mm made out of 5.0mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube and fixing in Opening as per Specification and Drawing of MES Schedule, complete all as specified and as directed. |
| 35 | S&F Factory Made Solid PVC Moulded Door Shutter, 28mm to 30mm thick (Stiles), with 2, 4, or 6 Raised Panel design with 2.0mm thick Moulded PVC Sheet on the Front Face and 2.0mm Plain Colour PVC Sheet on Back Face, with Particle Board Core and fixing in Frame at Site as per Specifications & Drawing of MES Schedule, complete all as specified and as directed. |
| 36 | S&F Aluminium anodised Barrel Tower Bolt of Size 150mm long, Extruded Section, complete all as specified and as directed. |
| 37 | S&F Aluminium anodised Barrel Tower Bolt of Size 200mm long, Extruded Section, complete all as specified and as directed. |
| 38 | S&F Aluminium alloy, anodised, Sliding Door Bolt 300mm long with Hasp, Staple (Bolt type) and Fixing Clips of Sheet, Cast or Extruded Sections and Fixing Bolts and Sliding Bolts of Extruded Sections or Cast-Aluminium alloy, complete all as specified and as directed. |
| 39 | S&F Stainless Steel Butt Hinge of Size 75mm, complete all as specified and as directed. |
| 40 | S&F Stainless Steel Butt Hinge of Size 100mm, complete all as specified and as directed. |
| 41 | S&F Aluminium Handle of Size 125mm, Cast type, anodised, complete all as specified and as directed. |
| 42 | S&F Aluminium Handle of Size 150mm, Cast type, anodised, complete all as specified and as directed. |
| 43 | S&F Floor Door Stopper having Overall length of Cover Plate 140mm of Aluminium Alloy Body and Tongue, anodised, with Hard Drawn Steel Spring, fixing in Floor, complete all as specified and as directed. |
| 44 | S&F Mild Steel Ordinary Rat Tail Rod Pattern Spring 300mm for Door Shutter including Roller and Roller Plate, complete all as specified and as directed. |
| 45 | S&F Stainless Steel Wire Cloth 0.36mm nominal dia of Wire and average width of aperture 1.40mm and fixed with Stainless Steel Wire Staples, complete all as specified and as directed. |
| 46 | S&F Sheet Glass 3.0mm thick, Plain, Ordinary quality and Glazing with Oil Putty in Square not exc. 0.50 Sqm in Each Pane, complete all as specified and as directed. |
| 47 | M&L TMT Bars 10mm dia and Over, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 48 | M&L TMT Bars 8.0mm dia, Cut to length, Bent to Shape required including Cranking, Bending Spirally for Hooping for Columns, hooking Ends and Binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 49 | M&L TMT Bars 8.0mm dia in Stirrups, Spacers and Binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including Mild Steel Wire (annealed) not less than 0.9mm dia, complete all as specified and as directed. |
| 50 | M&L Mild Steel Bands, Straps, Supports or Stays for Rain Water, Ventilating Pipes including Bolts (if required), Heavy Hooks (Stay) for Large Gates; Hook and Pintle Hinges, Large Hasps and Staples; Chains; Hand Made Sliding Bolts; Clamps; Holdfasts (Flat Iron 25x4.0mm); Wall Ties; Hooks for Hanging Fans; Plain Angle Cleats for securing Purlins to Wood Trusses or Rafters; Knee Piece inserts; 2-way and 3-way Straps, Plate Washers and Similar Small Articles, conform to Fe-290 Gde-E-165, complete all as specified and as as directed. |
| 51 | M&L Mild Steel Framed Works such as Grills, Gratings, etc. with Ends of Bars shouldered and/or riveted or forged into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walkways; Railings; Framework of Water Tanks and Similar Works, conforming to Fe-290, Gde-E-165, complete all as specified and as directed. |
| 52 | M&L Mild Steel Tublar Trusses, Rafter, Purlins, etc. including Special Shaped Washers, etc. complete using ERW or Induction Butt welded Tubes, confirming to IS:1161-1979, Grade St-240, complete all as specified and as directed. |
| 53 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 54 | S&F Pre-painted Galvalume Aluminum Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Ridges/Roof Covering, Cladding to Walls, fixed with Aluminum Self Tapping Screws and Aluminum Washers of suitable Size, complete all as specified and as directed. |
| 55 | M&L Exposed Suspended False Ceiling System with Powder Coated Aluminium Anodised Sections Snap Grid/ Frame Work of Size 605x605mm (but except Hangers) all as per Specification and Drawing of MES Schedule, complete all as specified and as directed. |
| 56 | S&F Hangers 4.0mm dia GI Wire (upto 1200mm length) for adjusting Level, fixed to Roof Slabs by means of Ceilling Cleats made out of GI Flat 40x3.0mm in Size, 60mm long and Expansion Hold Fasteners 12.5mm dia, 40mm long, complete all as specified and as directed. |
| 57 | S&F HSPC Non-Asbestos Fibre Cement Building Board 595x595x6.0mm thick, Pre-primed, Self Embossed, Textured Designer Boards, Water Resistant, Termite Resistant, Fire Resistant for insulation, fixed or laid/ inserted to Snap Grid Frame Work with Screws, complete all as specified and as directed. |
| 58 | M&LCement Concrete 1:4:8 (40mm graded stone aggregate) 75mm thick in Sub-base to Floor, etc., complete all as specified and as directed. |
| 59 | M&L Cement Concrete 1:2:4 (12.5mm graded stone aggregate) 25mm thick in Sub-base for laying of Tiles, etc. including maintaining Level Uniformly, finished Concrete Surfaces Fair and Even, complete all as specified and as directed. |
| 60 | M&L Non-Skid Ceramic Coloured Tiles 7.0mm to 8.0mm thick (Square/Rectangular), Area of Each Tile exc. 0.11 Sqm but not exc. 0.18 Sqm (1st quality and/ or as approved) in Floors, Jointed in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, laid over and including Screed or Screed Bed 15mm thick in Cement Mortar 1:6, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 61 | M&L Glazed Ceramic Coloured Tiles 300x200x6.0mm to 7.0mm thick (1st quality and/ or as approved) conforming to IS:13753, in Vertical Surfaces i.e. Dado, Skirting, etc., Set in Neat Cement Slurry and Pointed in Coloured Cement to match the Tile, fixing over and including Screed or Screed Bed 10mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 62 | M&L Machine Cut Granite (of any type) Work 20mm thick (Table Rubbed & Polished) in Steps, Jambs, Pillars, Window Cills, Cooking Platforms and like in Cement Mortar 1:4 including Pointing in White Cement 1:2, using Marble Dust with Admixture of Pigment to match with Shade of Granite, fixing over and including Cement Screed Bed 15mm thick in Cement Mortar 1:4, complete all as specified and as directed.NOTE : Cost of Screed Bed will deemed to be included in the Quoted Unit Rate. |
| 63 | M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) 75mm thick in Plinth Protection, etc., Laid in Alternate Panels, finished Concrete Surfaces Even and Smoooth without Using Extra Cement, complete all as specified and as directed. |
| 64 | M&L Machine Pressed Pre-cast Concrete Interlocking Paver Block 60mm thick of M-35 Grade, with Grey Cement and Pigment of any shape and Size (as ordered), conforming IS-15658-2006, ISI Marked, laid dry over Clean dry Sand and grouted with Clean dry Sand as in Floors, complete all as specified and as directed.NOTE : Sand will be Measured & Paid separately under appropriate Item. |
| 65 | M&L Sand Filling/ Cushioning 50mm thick under Pre-cast Concrete Interlocking Paver Block and Filling gaps, etc. including Spreading and Levelling, etc., complete all as specified and as directed. |
| 66 | M&L Rendering 5.0mm thick in Cement Mortar 1:3 on Ceiling Surfaces of Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 67 | M&L Rendering (Internal) 10mm thick in Cement Mortar 1:6 on Brick/ PCC Blocks or Concrete Works, finished Plastered Surfaces Even and Smooth without using Extra Cement, complete all as specified and as directed. |
| 68 | M&L Rendering (External) 15mm thick on Brick/PCC Blocks or Concrete Works consisting in 2 layers, Backing/Under layer of 10mm thick in Cement Mortar 1:4 and Float/ Top layer 5.0mm thick in Cement Mortar 1:4 including mixeing WPC to Float/ Top layer, finished Fair and Even, complete all as specified and as directed. NOTE : Water Proofing Compound (WPC) will be Measured & Paid separately under appropriate Item. |
| 69 | Supply only Water Proofing Compound (as approved), conforming to IS:2645-2003, complete all as specified and as directed. |
| 70 | M&L Preparing Newly Plastered Surfaces of Walls and Applying Three Coats of White Wash, complete all as specified and as directed. |
| 71 | M&L Preparing Newly Plastered Surfaces of Ceiling and Applying Three Coats of White Wash, complete all as specified and as directed. |
| 72 | M&L Preparing Newly Plastered Surfaces of Walls and applying Two Coats of Cement Based Paint (as approved Tint) over a coat of Alkali Resistant Priming Paint, complete all as specified and as directed. |
| 73 | M&L Preparing New Wooden Surfaces of any description, over 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade Paint of as approved Tint) over a Coat of Pink Primer, complete all as specified and as directed. |
| 74 | M&L Preparing Steel and Iron Surfaces of any descriptions, over exc. 10 Cm in Width or Girth and applying Two Coats of Synthetic Enamel Paint (1st quality/ grade) over a Coat of Red Oxide Zinc Chrome Primer, complete all as specified and as directed. |
| 75 | M&L Preparing Previously Untreated Surfaces of Wood and Wood Based Materials, of any description and girth not otherwise described and Treating with Tar or Coal Tar Black Paint to Backs of Chowkats, etc. Area tarred exc. 0.10 Sqm but not exc. 0.50 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. |
| 76 | M&L Preparing Previously Untreated Surfaces of any description and girth not otherwise described and Treating with Tar or Coal Tar Black Paint to Holdfast or similar Small Items, Area tarred not exc. 0.10 Sqm Each including Sanding with Clean Sharp Sand after tarred, complete all as specified and as directed. |
| 77 | S&F Stainless Steel Letters or Figures of Height exc. 200mm but not exc. 300mm with Width of 40mm thick made out of Sheet of thickness 1.0mm and Side Depth 25mm embeded into Granite Work, complete all as specified and as directed.NOTE : Cost of embedding Stainless Steel Letters or Figures into Granite Work and Commas, Dashes, Under-line, etc. (as ordered/ required) are inclusive of Quoted Unit Rate. |
| 78 | S&F Galvanised Steel Tubing 15mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 79 | S&F Galvanised Steel Tubing 20mm bore (dia), medium grade, conforming to IS-1239 with all Fittings, fixed to Walls, Ceiling or laid in Floors, complete all as specified and as directed. |
| 80 | S&F Bib Tap 15mm bore (dia) Cast Copper alloy, Chromium Plated, Fancy type with Crutch or Butter-fly Handle, screwed down, screwed for Iron Pipe or for Brass Ferrule, complete all as specified and as directed. |
| 81 | S&F Pillar Tap 15mm bore (dia), Cast Copper alloy, Chromium Plated, with Capstan Heads, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with Long Screwed Shanks and Fly-nuts, screwed for Iron Pipe, complete all as specified and as directed. |
| 82 | S&F Angle Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed. |
| 83 | S&F Stop Valve 15mm bore (dia), Cast Copper alloy, Chromium Plated, screwed down, high pressure, with Crutch or Butter-fly handle, screwed both Ends for Iron Pipe or for Unions, complete all as specified and as directed. |
| 84 | S&F Gun Metal Globe/Gate Valve 20mm bore (dia) with Iron Wheel Head, screwed both Ends for Iron Pipe, complete all as specified and as directed. |
| 85 | M&L Rotational Moulded Polyethene Water Storage Tank 1000 Litre Capacity, Cylindrical, Vertical with Closed Top, 3 layered, conforming to IS:12701-1996, hoisted and fixed in Position all as specified in MES Schedule, complete all as specified and as directed. |
| 86 | S&F PTMT Ball Valve 20mm bore (dia), having weight not less than 210 Grams, high pressure with Epoxy coated Aluminium Rod and high density Plastic Ball, screwed for Iron Pipe, complete all as specified and as directed. |
| 87 | M&L Vitreous China White Squatting Pan of Size 580x440mm, Orissa Pattern with Integral Foot Rests, PVC (SWR) ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) incluiding provision of Lime Concrete Bedding and Making Good to Floor/ Distrubed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 88 | S&F PVC Flushing Cistern 10 Litre capacity White, Low Level, Valveless, Syphonic Action type with Inlet, Ball Valve, Float & Handle, and PVC Flush Pipe 32mm bore (dia) for suitable Length, a Pair of Cast Iron Brackets Erecting Stand duly painted including Cutting, Pinning in Ends and Making Good to Distrubed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 89 | S&F Vitreous China White Wash Hand Basin 600x480mm in Size, Flat Back with Brass Chromium Plated Waste Fitting 32mm bore (dia) and PVC Waste Pipe 32/40mm bore (dia) of suitable Length, a Pair of Cast Iron Brackets/ Erecting Stand duly Painted, Cutting and Pinning in Ends and Making Good Disturbed Surfaces in Cement Mortar 1:3, complete all as specified and as directed. |
| 90 | S&F PTMT Bottle Trap 40mm bore (dia) having (Minimum Weight 270 Grams) and Minimum Water Seal of 25mm suitable for Wash Hand Basins with Inlet and Outlet, screwed for Pipe or Connections including necessary Packing, Uunion, Cap, complete all as specified and as directed. |
| 91 | S&F PVC Connection Pipe 15mm in Size and 450mm in length with PTMT Nuts suitable for Connecting with Flushing Cistern, Wash Hand Basin, etc., complete all as specified and as directed. |
| 92 | S&F Looking Mirror 600x450mm in Size, 5.5mm thick Selected quality Glass, Bevelled edge, with Rigid PVC Frame around and mounted on 4.0mm thick PVC Sheet or 6.0mm thick Commercial Ply, fixed to Wall with Brass Chromoum Plated Screws on Wooden/ PVC Cleats, complete all as specified and as directed. |
| 93 | S&F Tubular Towel Rail 20mm dia, Brass Chromium Plated, D-type, 60 Cm long between Flanges with Bracket (One Pair), fixing to Walls with and includingChromium plated Brass Screws and Wooden/ Plastic Cleats, complete all as specified and as directed. |
| 94 | S&F Shower Rose of Size not less than 125mm (as approved) with Shower Arm and Swival Joint, Chromium Plated including fixing to Steel Pipe 15mm bore (dia), complete all as specified and as directed. |
| 95 | S&F Soap Dish of Size not less than 125mm (as approved), Chromium Plated, fixing to Walls with and including Chromium plated Brass Screws and Wooden/ Plastic Cleats, complete all as specified and as directed. |
| 96 | S&F PVC (SWR) 75mm bore (dia) Floor Trap having Diameter of Outlet 75mm, Plain with Grating including Jointing with Solvent Cement, complete all as specified and as directed. |
| 97 | S&F PVC (SWR) 75mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, fixing to Walls or laid in Floors, complete all as specified and as directed. |
| 98 | S&F PVC (SWR) Bend 75mm bore (dia), any Radius, etc. and Jointing with Solvent Cement, complete all as specified and as directed. |
| 99 | S&F PVC (SWR) Vent Cowl 75mm bore (dia), Jointing with Solvent Cement, complete all as specified and as directed. |
| 100 | S&F PVC (SWR) 110mm bore (dia) Pipe, Single Socketed, in any length with Rubber Ring Joints, laid in Trenches, complete all as specified and as directed.NOTE : Necessary Earthwork will be Measured & Paid for separately under appro-priate Items. |
| 101 | M&L Cutting into Existing Manhole for Connecting New Drain Pipes of 110mm (Internal dia), Making Good to Pipe and Rendering, Cutting out Existing Benching for and Forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed. |
| 102 | E/M SERVICES/WORKS |
| 103 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE LIGHT POINT controlled by One 1-way Switch 6 Amp, complete all as specified and as directed. |
| 104 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, single core FRLSH Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated, unsheathed, multi-stranded, Single Core FRLSH Copper Conductor Cable (Green Colour) as Earth Continuity Wire for ONE 3/5 PIN SOCKET 6 AMP POINT on SAME BOARD, complete all as specified and as directed. |
| 105 | M&L Point Wiring with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 1.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodating Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed. |
| 106 | M&L Point Wiring with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded single core Copper Conductor Cable with 2.5 Sqmm (nominal area) 1100 Volt grade PVC insulated unsheathed FRLSH multi-stranded Single Core Copper Conductor Cable (Green Colour) as Earth Continuity Wire, drawn in and including PVC Casing Capping (ISI Marked) of suitable Size (25/32/40mm width) along with all Fitting/ Fixtures as Tee, Bend, Elbow, Socket, Saddles, etc. complete with PVC Board of suitable Size for accommodat-ing Switches, Sockets, Regulators, etc. Earth Continuity Wire connected to Common Earth dolly for ONE 3/5 PIN SOCKET OUTLET 6/16 AMP POINT on INDEPENDENT BOARD, complete all as specified and as directed. |
| 107 | S&F Switch Piano 6 Amp, Single Pole, Flush type, 1-way, 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 108 | S&F Socket Outlet 6 Amp, 3 Pin, 2-in-1, Flush type, 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 109 | S&F Switch Socket Combination 6/16 Amp, 3 Pin, 3-in-1, Multi-purpose type, 230 Volt AC, complete all as specified and as directed. |
| 110 | S&F Ceiling Rose 65x50mm, 3 Terminals, Surface Bakelite suitable for 230 Volt AC and Connecting up, complete all as specified and as directed. |
| 111 | S&F Angle/ Lamp Holder PVC/ Polycarbonate type with Back Plate suitable for Batten Fitting and Connecting up, complete all as specified and as directed. |
| 112 | S&F LED Bulkhead Luminaires 1x10 Watt including LED Bulb/Light, Driver, Holder, Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size, complete all as specified and as directed. |
| 113 | S&F LED Tube Light Fitting 1x20 Watt, T-08 complete with 20 Watt T-8 LED Batten/ Rod and mounted on 2 No. PVC Box suitable for fixing of Tube Light Fitting and Connecting up with & including suitable Length Twisted Flexible Copper Wire of Size 40/0.0076, complete all as specified and as directed. |
| 114 | Supply & Hanging BLDC Ceiling Fan 1400mm Sweep, Min Air delivery 245 CFM and Service Value 6.0 BEE, 5 Rated having 3 Blades, Holding Down Rod and Accessories, 230 Volt, Providing Electric Connection from Ceiling Rose to Ceiling Fan with and including Twisted Flexible Copper Conductor Cable of suitable Size and Length, 3 Core, complete all as specified and as directed. |
| 115 | S&F MCB 6 Amp to 32 Amp, Single Pole, \"C\" Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed. |
| 116 | S&F MCB 10 Amp to 32 Amp, Single Pole & Neutral, \"C\" Curve, 50 Hz, 10 kA, 240 Volt and Connecting up, complete all as specified and as directed. |
| 117 | S&F Sheet Metal Enclosure for DB\"s when MCBs to be used 8-way, SPN, 240 Volt, Double Doors, Epoxy Based Powder coated suitable for mounting MCB DP/ SPN as Incomer and MCB SP as Out-goings with 200 Amps rated Bus-bar, Neutral Bar, Earth Bar, Connecting Cable Links and Connecting up, complete all as specified and as directed. |
