Tender For Tender For Textile Testing Lab Equipment, varanasi-Uttar Pradesh

Supplying Textile Testing Lab Equipment , The Unit Is Recommended For Yield Testing I.E. The Determination Of Weight Per Unit Area. The Sample Cutter Cuts Out Rapidly And Accurately Circular Specimen Of 100 Cm2, Which Is Exactly 1 / 100Th Of A Square Meter. The Result In Grams, Multiplied By 100, Gives The Gsm (Grams Per Square Meter) Directly. Grams Per Square Meter= Specimen Weight In Grams X 100. Single Solid Machine. 3 Metal Special Cutting Wheels Perfectly Synchronized To Get Precise 100 Cm2 Cut. Holds Complete Grip On The Fabric With Minimal Effort. With A Smooth Grip Rotation The Gsm Sample Will Be Apart. Long Lasting Hardened Metal Wheels Gives You Smooth & Long Cutting Life. Template Required With The Machine. , Latest Handy Pick Glass To Check The Reed (Ends) And Picks Of Any Type Of Fabrics Accurately. Very Fine Pick Glass With Pointer. Metal Body, Size: 5.3 X 4.6 X 1.4 Cm. Magnification: 6X. Weight: 56±4 Gms. Dimensions: 0.5 X 0.25 X 1 Base , The Equipment Is Used To Determine The Thickness Of Fabrics Digitally. Maximum Capacity 10 Mm & Accuracy 0. 01Mm. Portable & Handy To Carry Anywhere. Digital Readout Of Thickness In Millimeter. Supplied With Two Pressure Feet For Different Pressure. A Dead Weight Is Provided With The Instruments As Per Requirement Of Standard Pressure. Supplied With Calibration Certificate. Range Of Measurement: 0 - 10 Mm Least Count Of Dial Gauge : 0.01 Mm Diameter Of Anvil : 60 Mm Diameter Of Pressure Foot (Interchangeable) 10 Mm & 25 Mm Applied Pressure : 4.14 Kpa Or 23.4 Kpa Throat Depth : 22 Mm. Astm Standard – D1777-96 , For Accurately Determining Fibre Length Characteristics Including Effective Length And Percentage Of Short Fibre.2.5 % And 50% Span Length. Measuring Principle: Baer Sorter Method Measuring Range: Up To 50 Mm (2 Inch)Comb Spacing: 6 Mm Top And Bottom Comb Setting: 6.35 Mm Row Of Top And Bottom Middle Setting: 3.2 Mm Number Of Top Comb: 3 Nos Number Of Bottom Comb: 6 Nos Test Specimen Size: 50 Mg Applicable Standards: Astm D1440 And Bs 4044 Physical Dimensions: Size (Wdh): 220 X 120 X 120 Mm Weight: 4 Kg (Accessories Included)A Clamp, Velvet Mat, Supporting Rods And Combs Provided. , Table Top Machine. Noise Free, Long Life Indigenous Blower Motor Outside Fitted. Mini Carding Like Machine With Built In Motor And Two Stage Filters. Detachable Feed Tray And Dust Collection Tray Are Provided. Operates On A Superior Aerodynamic Lint/Trash Separation And New Collection Technique Provides The Micro Dust Present In Cotton Sample. Emergency Stop For The Safety Of The Operators. Feeding Quantity :50Gms To 100Gms. Main Motor: 1.0 Hp/ 3 Phase Motor, 1440 Rpm Blower Motor: 1.0 Hp/ 3 Phase Motor, 2880 Rpm Our Scope Of Supply: Machine, Blower. , Specialized Equipment To Determine The Draping/Hanging Phenomenon Of Fabrics In Numerical Form. Smooth Precision Engineered Components For Excellent Performance. 1000W Halogen Lamp Used For Exposing The Sample To Be Tested. With Specially Designed Developing Chamber. Supplied With Complete Instructions To Calculate Drape Co-Efficient. Complete With All Accessories-Ammonia Paper, Template Etc. Supplied Complete With Calibration Certificate (Traceable To Npl). Light Source: 1000 W Halogen Tube. Size Of Specimen Support Unit: 125 Mm Diameter X 60 Mm Height. Size Of Test Specimen: 250 Mm Diameter. Panel Board Dimensions: 60X90x140 Mm. Size Of Acrylic Sheet: 365X380 Mm. Size Of Exposing Chamber: Length X Depth X Height 400Mm X 400Mm X 800Mm. Size Of Developing Chamber 400Mm X 400Mm X 200Mm. Overall Dimensions Of Instrument 400Mm X 400Mm X 110Mm 16” X 18” X 40”.Net Weight Of The Instrument: 36.6 Kg. (80.52 Lbs). Bs 5058 Standards. , Truly Portable Instrument. Micro Controller Based & User Friendly. Facility To Enter Name And Lot Number. Large Lcd Screen - To View Result. Print Out Of Completed Test Series Result From The Built-In Mini Printer. Facility To View And Print The Completed Test Result During Any No. Of. Test (Max.10.Nos). No Need Of Compressor Air And A.C. Mains Supply. Can Be Used To The Places Where Ever Required. Measuring Range: 2.0 To 6.5 ?G/Inch (Microgram/Inch) Test Parameter: Micronaire Sample Size : 4.0 +/- 0.1 Grams Test Time : 20 Sec Approx. Accuracy : +/- 0.1 Ug/Inch Astm-D1448-11 , To Determine The Crimp Of Texturized Yarn / Yarn Affected By Knitting Or Weaving. Sliding Weight Acting On A Lever Arm Range From 0 To 25 Gm. Maximum Crimp Extension Up To 125 Mm Can Be Measured. Gauge Length Of Yarn Can Be Set Up To 400 Mm. Supplied With Calibration Certificate Traceable To Nabl. Load On Yarn: 3-20 Gm Extension Scale: Up To 125 Mm Gauge Length Of Yarn: Up To 440 Mm. Dimensions Of The Unit: 770 (L) X 120(W) X 140 (H) Mm. 30.50 (L) X 4.75 (W) X 5.5 (H) Inch. Weight Of The Unit : 15 Kg (33 Lb.). Astm D3937-12 , Test Specimen 44±1Mm×4. Load-595G,795G. Counter/Timer Lcd, 0-999999. Machine Size58.5×56.5×32.5Cm. Weight67kg. Power 1Ø, Ac220v,1.5A. Main Unit: 01 No. Top Moving Plate : 01 No. Sample Cutter Template (140Mm) : 01 No. Sample Cutter Template (38Mm) : 01 No. Abrading Platform Clamping Rings : 04 Nos. Abrading Platform Clamping Nuts : 04 Nos. Numbered Specimen Holder Set : 04 Sets. Dead Weight (9Kpa) (For Apparel Testing) : 04 Nos. Dead Weight (12Kpa) (For Upholstery): 04 Nos. 10. Loading Pin: 04 Nos. 11. Metal Pen To Make Lissajous Figure Of Abrasion: 01 No. Required 4 Test Specimen According To Standards. Astm D4966. , Latest Design Computer Interfaced Projection Microscope For Fiber & Yarn Analysis. With Maximum Resolution Of 1500X.With 5-Mega Pixel Digital Camera To Capture The Magnified Photograph Of The Object. Photos Of All Fibers Longitudinal & Cross-Sectional View Are Loaded In Software To Identify The Fibers Without Prior Knowledge In The Same. Any Type Of Measurement Like Length, Area, Count Of Any Fine Textile Fiber Can Be Done. Mains Supply: 230 + 10%, 50 Hz, 1 Phase Ac Supply. Magnification Power: 150X, 300X, 600X & 1500X Objective: 4X, 10X, 40X & 100X.Light Control: Invariably Controlled Light Intensity Meter. Mechanical Stage: Graduated Mechanical Stage With X & Y (Forward & Backward Movement And Left & Right Movement). Coarse Focus Adjustment: With A Knob (Bigger Knob). Fine Focus Adjustment : With A Knob (Smaller Knob). Light Condenser Movement: Up/ Down With A Knob Light Centering : With Three Long Screws. Stage Micrometer : 1 Mm Scale With 0.01 Mm Accuracy. Overall Dimension: Length Depth Height 304 Mm 203Mm 457Mm: 11.96 Inch 8 Inch 18 Inch Net Weight Of The Unit: 10 Kg (22 Lb.). With Software And Pc. , Microprocessor Based Programmable Equipment Used To Determine The Twist Per Inch/Cm In Single Yarn, Double Yarn & Open-End Yarns. Special Adjustable Tensioning Device Provided To Give Tension To The Yarn While Testing. With Adjustable Motor Speed. Feather Touch Operational Keys With Lcd Display.1 To 50Gm Tension Weight Supplied To Give Proper Tension During Testing. Yarn Bobbin Stand Is Supplied To Rest And Draw The Specimen Yarn While Testing. Supplied With Calibration Certificate. Power Supply : 220 / 230V, 50 Hz. Ac Single Phase. Display : Lcd Digital Display Maximum Test Length : 50 Cm/ 20 Inch. Tension Weight: 1Gm, 2Gm, 5Gm, 10Gm, 20Gm, 50Gm. Dimensions : 1130 X 488 X 380 Mm Gross Weight : 20 Kg. Astm D1423. , Moisture Regain Oven, Used For Conditioning Of Various Textile Samples Of Fibre, Yarn, Lea, Fabric, Etc., Prior To Testing. This Unit Is Having Facility To Control &Maintain Suitable Temperature & Humidity Inside Chamber. This Unit Is Having Approx. Size Of 15” X 15” X 15” Inside Dia., With 2 Shelves Of S.S., Inner Chamber Of S.S.(Stainless Steel) And Outer Chamber Of Powder Coated M.S. (Mild Steel) Proper Insulation Is Provided In Between Walls Of Inside & Outside Chambers. Unit Consists Of Heating & Refrigeration System For Controlling Temperature & Suitable Arrangement For Humidity Control With Air Circulating Fan.Control Panel Consists Of Mains, Digital Temp. Controller, Digital Humidity Controller, Neon Indicators, Etc. Unit Is Provided With Castor Wheel For Easy Movability. Temperature Range: 5 To 50 Deg. C. Humidity: Ambient To 95% +/- 3%.The Is Supplied Complete With Digital Display, Forced Air Circulation, Etc. Astm D4442-20. , Conventional Wrap Block Is Highly Reliable And Accepted By All Technical Personnel In The Textile Industry Accurate 1 Yard Circumference, High Quality M.S. (Mild Steel) Chrome Plated Drum To Measure Hank Measurement In Sliver And Roving. An Electronic Preset Table Counter With Alarm For Completion Of Counts Is Provided. Hand Operated Wrap Block. , Speed Of Rotation Of Boxes: 60 Rpm (+2 Rpm) Size Of Test Specimen: (250X125) Mm No. Of Boxes : 4Boxes Dimension Of Boxes(Inner): 235X235x235mm Size Of Rubber Tubes : Length 140Mm+1Mm : Diameter 31.5Mm +1Mm : Wall Thickness 3.2Mm+0.5Mm : Weight 52.25Gms+1Gm Motor : 1/4H.P.Single Phase Geared Motor Digital Counter: 0-99999/L.C-1 Scale For Checking The Pillness Rating And Sample Holder Required. Astm D3512/D3512m-16 , Very Delicate & Sophisticated Instrument With Auto Calibration, Stability Indication And Auto Backlight. Weighs Up To 600 Gm With Accuracy Of 0.01 Gm Weigh Unit Switchable: Gsm, Gm, Ct, Gn, Lb, Pcs Etc. Complete With Acrylic Cover For Error Free Reading. Users’ Friendly Bigger Lcd And Pan Size Complete With Accessories As A.C Adaptor. Supplied With All Accessories. Capacity: 600 G Least Count: 0.01 G Power Source: Adaptor Supply 10 V/500 Ma Operating Temperature: 0-40° C Overall Dimensions Of The Unit: Length Depth Height 305Mm 254Mm 254 Mm 12-Inch 10-Inch 10 Inches Net Weight Of The Instrument: 2.5 Kg (3.74 Lb.). Astm E898-20. , Specially Designed Digital Model To Be Used To Conveniently Make Skeins (Lea/Hank) Of Yarn Digital Control Panel With Resettable Revolution Counter. Supplied With 1 Meter Or 1.5-Yard Wheel As Per Customer Demand. Specially Designed Bobbin Holding Stand, Which Can Accommodate Bobbins Die Up To 100 Mm. Bobbin’S Stands, Is Equipped With A Yarn-Tensioning Device. Five Skeins (Lea/Hank) Can Be Made Together. Complete With All Accessories. Swift/Wheel Circumference: 1.5 Yards Or 1 Meter. Number Of Leas Made At A Time: 5. Spread Of Each Lea: 20Mm + 5. Counter (Three Digits): Digital Pre-Set Counter With Sensor. Operating Speed: 100 + 2 Rpm Motor: 1/8 Hp 230V Geared Motor. Overall Dimension Of The Unit: 650 (L) X 500 (W) X 670 (H) Mm. Net Weight Of The Unit: 38 Kg (83.7 Lb.). Overall Dimensions Of Cone Unit: 440 (L) X 390 (W) X 515 (H) Mm Net Weight Of Cone Unit: 7.5 Kg.Iso 2060, Astm D1907/2260, Bs 2010 , Computerized Fibro Graph Able To Measure 2.5% And 50% Span Length, Upto 50Mm Fibre Length, Indicates Uniformity Ratio & Fibro Graph, Additional Two Span Length Selectable, Selectable Two Pre-Determined Fibre Amount At Par, Predicts Fibre Quality Index And Yarn Csp At Various Mixing. It Is Based On Microelectronic Mechanical System And Optical Scanning Technique.With Software, Pc And Printer. Astm D1447-89. , Specialized Equipment To Determine The Flammability Of The Fabric. With Fine Gas Control System To Regulate The Flame Length. Movable Sample Mounting Mechanism To Adjust The Sample As Per Standards. With Specially Designed Digital Resettable Timer. With Transparent Acrylic Door For Removing External Interferences. Supplied With All Accessories. Supplied With Calibration & Inspection Certificates And Detailed User Manual. Power Supply: 220V Ac, 50 Hz, 1-J. Flame Source: L.P. Gas. Gas Cylinder & Regulator: General (Lpg). Gas Pipe: 1.5 Meter. Multipurpose Gauge: 16 Mm, 19 Mm, 8 Mm. Movement Of Platform: Manually Operated By Bearing Wheels. Specimen Cutting Template: 150 Mm X 500 Mm. Flame Length: 16 Mm. Burner Specimen Distance: 8 Mm. Specimen Holder Receiver Tray Position: 45° Angle. Equipment Door: Acrylic Made (Open Able Upward). Astm D635. , Frame Construction: Stainless Steel. Load On The Test Specimen (As Per Iso 105E01): 5 Kg. Size Of Test Specimen: 100 Mm X 40 Mm. Size Of Acrylic Separator Plates: 115 Mm X 60 Mm. Number Of Separator Plates: 21 Nos. Dimensions Of The Unit: 125 Mm X 105 Mm X 90 Mm Net Weight Of The Unit: 13Kg. Load On The Test Specimen (As Per Aatcc 106): 4.5Kg. Can Also Be Used For Testing Color Fastness Against Sea Water And Water. Made Of Stainless-Steel Frame. A Different Load For Aatcc Standards Is Available On Request. User Friendly And Corrosion Resistant. Smooth Precision Engineered Components For Excellent Performance. Scale Required For Checking The Color Fastness. , Latest Model Electronic Crock Meter Used To Determine The Colorfastness Of Textile To Dry Or Wet Rubbing As Per Aatcc & Iso Requirement. Easy To Use, Polycarbonate Dual Specimen Clamps For Fabric As Well As Garment Testing. Diameter Of The Finger (For Fabrics & Textiles): 16 Mm Force On The Finger (For Fabrics & Textiles):9 Newton. Size Of Crocking Cloth: 5 X 5 Cm. Size Of Crocking Cloth (For Furnishing Fabric): 7 X 7 Cm Length Of The Traverse Of The Finger: 104 ± 3 Mm. Microprocessor Based Counter: 0 – 999, (Least Count: 1) Overall Dimension Of The Unit: 540 (L) X 390(W) X 245(H) Mm Net Weight Of The Unit: 21 Kg. Astm F1319. , To Determine The Color Fastness To Washing Or Dry Cleaning. Latest Ergonomic Design With Customer Friendly Control Panel. Adheres To Both European And American Standards. Temperature Up To 95 C With A Digital Temperature Controller. Digital Timer With Automatic Shutdown & Audible Warning. Inching Facility For Loading And Unloading The Beakers.4 Beakers 550Ml ± 50 Ml. (For Iso) And 4 Nos. 1200Ml Beakers For Aatcc. Supplied With Complete Accessories To Conduct The Testing Immediately After Receipt. Inner Dimensions Of The Main Bath: 378 X 525 X 525 Mm. Capacity (In Liters) Of Main Bath: 44 Liters (Approx.). Number Of Beakers (Test Vessels): 08 Nos. (4 For Iso And 4 For Aatcc). Standard Seal For Beakers: 08 Nos. Special Neoprene Gaskets. Volume Of Each Beakers As Per Iso: 550 ± 50 Ml (4 No’S). Volume Of Each Beakers As Per Aatcc: 1200 ± 50 Ml (4 No’S). Speed Of Rotation: 40 ± 2 Rpm. Temperature Controller: Pt-100 Type (Up To 99.9 C). Temperature Regulation: ± 2.0°C. Timer (Digital): 0-99 Minutes, Least Count: 1 Minute. Geared Motor: ¼ H.P, Single Phase. Scale Required For Checking The Color Fastness. , An Effective And Essential Fabric & Garment Testing Equipment. It Is Used To Determine The Color Fastness And Degradation Of Textiles To Sunlight. This Standard Model Comes With Xenon Lamp. Automatic Voltage Stabilizer. Stainless Steel Clamps. Gray Scale For Assessing Change In Color & L-4 Standard @ Extra Cost. Light Source: 4200 Kelvin, Xenon Lamp. Test Chamber Temperature: Ambient To 60° C. Temperature Range Control: By Air Circulation, Type ‘A’ Rectangular Cells. Maximum Number Of Samples: 24 Nos. ‘A’ Rectangular Cells. Maximum Space Per Type: 110 X 50 Mm ‘A’ Rectangular Cells. Specimen Thickness: Up To 1.5 Mm. Specimen Size: 100 X 50 Mm. Working Life Of Lamp: 2000 Hours. Power: 220 Volts, Single Phase, 50 Hz, A.C. Supply. Power Consumption: Maximum 1 Kw. Water: Use Of Distilled Water Only In The Water Circulation Unit For Humidity And Spray. Dimension Of The Unit: 450 Mm(W) X 450 Mm(D) X 650 Mm(H)Net Weight: 50 Kg. Required Outside Temperature: 10° - 24°C. Temperature Required Outside Humidity: 60% To 70% Humidity. Humidity Control: Inserting Saturated Solution In The Type ‘A’ Cells. 1-8 Blue Wool Standard Samples. , An Accurate Determination Of Sample Length. An Accurate Determination Of Its Weight. Balance: Precision Jewel Bearing. Template: Brass Polished. Overall Dimension: 20X 9X 7. Gross Weight: 5Kgs. Colors: Grey/ Metallic Blue. Leveling: Metallic Chrome, Leveling Screw. Astm D2260 , Small Size, Wideband Output With Three Sound Profiles, High Output Per Unit Volume. Full-Spectrum Sound. Multiple Sound Signatures. Low Magnetic Radiation. 6.1Khz To 11.8Khz Frequency. 101Dba To 106Dba Sound Pressure Level. 46.3O To 135O Impedance. , One Scale May Read From 0.1 To 1.0 To Give The Hank Of A 4-Yard Sample Of Sliver. The Second Scale May Read From 0.1 To 0.6 For 20-Yard Samples Of Roving. The Third Scale May Read From 4S To 80S For 840-Yard Samples Of Yarn. , Elmendorf Tearing Strength Tester, To Determine The Ballistic Tearing Strength Of Woven Fabrics, Plastic Films, Paper, Textile Elmendorf Tearing Or Other Similar Materials. Measuring Pendulum Range 16N, 32N, 64N Unit Of Measurement Cn, N,Gf, Lbf Distance Between Clamps 7.0 ± 0.25 Mm Tearing Distance 43 ± 0.15M Slit Size 20 ± 0.2Mm Tolerance Range 20-80 % Of Each Full Scale, Settable Range Or Full-Scale Angular Resolution High Resolution Digital Optical Encoder Display Lcd Display Backlight Blade Steel Data Port Rs232 Port For Printer Connection And 3 Pin Mini-Din Connector For Pc. Statistics V%, St. Deviation, Range % Template Size As Per Astm D1424 Standard Dimensions 490 X 430 X 680 Mm Power Supply 220V, 50Hz Weight 60Kg. Template And Scale Required With The Machine. , Specially Designed Instrument To Determine Tensile Strength Of Fabrics. ? Capacity 250 Kgs With Accuracy 100 Grams ? The Equipment Works On Cre Principle. ? With User Friendly Digital Control Panel. ? Maximum Jaw Separation 600Mm & Minimum Jaw Separation 25M. ? Control Panel Has Peak & Zero Setting Option. ? Runs On Advanced Software With An Easy To Operate User Interface And User-Friendly Control Panel. Principle: Constant Rate Of Extension (Cre). Load Capacity: 0.5-2500N. Test Speed: 1-999 Mm/Min. Gauge Length: 0.1-500 Mm. Force Resolution: 1/10,000. Force Accuracy: =+/-0.5%. Walking Space: 800 Mm (It Can Be Custom-Tailor According To Their Requirements). Force Unit Switch: Kgf, N & Ibf. Stop Mode: Emergency Stop Button, Overload Stop, Specimen Damage Automatic Stop, Upper & Lower Limit Set Automatic Stop. Main Power Off Machine Drive: Servo Motor Drive, Synchronous Wheel And Precision Ball Screw Drive. Power: 400W. Power Supply: 220V 50/60Hz 10A. Dimensions: 72 X 62 X 140 Cm (W X D X H). Weight: 150 Kg. Astm D5035. Yarn Jaw And Fabric Jaw Required. , Hand Operated And Noise Free Movement. Highly Accurate Test Results Under Uniform Load. Smooth Dial Movement With Brass Bush. Uniform Load By Weights On Samples For Evenness In Testing. Firm Hold Of Test Specimen By Stainless Steel. Spring Loaded Clamp. Circular Disc With Locking Pin For Safety. Dimension Of Test Specimen: 40 X 15 Mm Creasing Load: 1.0 Kg, 500 Gm. Distance Between Edges Of The Clamp To The Axis: 2 Mm. Angle Measurement: 10 To 180° X 1°. Template Provided. Tongue To Mount Sample Provided. Is 4861 : 1981 , Angle Of Inclination Of Intersecting Plane To Horizontal: 41., Load On Test Specimen: 10+2 Gm / Cm, Balancing Length Scale: 0-16 Cm, L/C:0.1 Cm, Overall Dimensions: Length Width Height, Of The Unit 275Mm 140Mm 200Mm. This Instrument Directly Gives The Bending Length To Calculate Bending Modulus & Flexural Rigidity From Calculation. Top Scale Graduated In 0-16 Centimeter, Weight 270Gm Strictly Meets The Specification Of Astm D1388-18 Standard. Provided Spirit Level For Checking The Leveling. Metal Based For Long Life & Durability. Supplied With Complete Accessories-Two Templates For Preparing Sample. Supplied With Calibration Certificate. , It Should Have Touch Screen Panel And Inbuilt Printer For Direct Results Print Out, Suitable To Test Various Fabrics, Including Industrial Fabric, Non-Woven Fabric, Air Filter Paper, Coated Fabrics, Etc. It Should Be A Floor Mounted Model With Castor Wheels For Easy Movability. The Test Principle And Results Generated By It Should Meet Almost All International Standards For Air Permeability Mentioned In Astm D737;Astm D3574;Enis0 7231;Eniso 9237;Bs 5636;Din 53887.Test Time: 20-30 Sec Approx., Accuracy: <±2%; Pressure: 0-3000Pa,Test Area: 20 Cm2-38 Cm2, Test Range: 0.2-12826Mm/S. , Computer-Controlled Portable Instrument Alambeta For The Fast And Non- Destructive Measurement Of Transient And Steady-State Thermo Physical Properties (Thermal-Insulation And Thermal-Contact Properties) Of Any Compressible Materials, Especially Plain Textile Fabrics. The Instrument Measures The Sample Thickness Also. Results Are Statistically Treated. Supply 110 V / 230 V, 100 W, Weight 8 Kg. Measured Parameters Of Fabric: Thermalresistance R: 0,005 To 1,0M2k/W(0,05 To 10 Tog, 0,03 To 6 Clo) At The Adjustable Contact Pressure 100 – 500 Pa, Thermal Conductivity ?:0,00 To 2,0W/M/K ,Sample Thickness H: 0,15 To 25Mm, Up To 35 Mm At Lower Precision Peak Level Of The Contact Heat Flux Qmax [W/M2/K] Ratio Between The Qmaxand Steady State Heat Flux P [1 - 5] ,Thermal Diffusivity[M2/S] In Any Range For Common Plastics And Textiles Thermal Absorptivity B: 20 To 1000 Ws1/2/M2/K – A New Parameter For The Objective Evaluation Of Warm-Cool Feeling Of Plain Textile Fabrics Non Destructive Testing Up To The Full Garment Thickness 25 Mm Or More At Lower Precision – No Need To Cut A Special Specimen. The Instrument Principle Satisfies The Iso Standard 8301. , Water Vapor Permeability Tester Is Used To Determine The Resistance Of Textiles And Textile Composites To Water Vapor Penetration Under Room Condition.Rf4319 Water Vapor Permeability Tester Consists Of 8 Test Cups With Water Reservoirs And A Precision Drive System. Test Cups Moving Speed 2Rpm, Test Cup 8 Units, Power Ac 230V, 50Hz/60Hz, Dimension 810(L) X 410(W) X 250(H)Mm, Weight Approximate 17Kg.

Refer document

INR 178440.0 /-

INR 89.22 Lakhs /-

Name of Work: SupplyingTextile Testing Lab Equipment

Sl. No.	Item Description
1	Supplying Textile Testing Lab Equipment
2	The unit is recommended for yield testing i.e. the determination of weight per unit area. The sample cutter cuts out rapidly and accurately circular specimen of 100 Cm2, which is exactly 1 / 100th of a square meter. The result in grams, multiplied by 100, gives the GSM (Grams per square meter) directly. Grams per Square Meter= Specimen Weight in Grams x 100. Single Solid Machine. 3 Metal Special Cutting Wheels perfectly synchronized to get precise 100 Cm2 cut. Holds complete grip on the fabric with minimal effort. With a smooth grip rotation the GSM sample will be Apart. Long lasting hardened metal wheels gives you smooth & long cutting life. Template required with the machine.
3	Latest handy pick glass to check the reed (ends) and picks of any type of fabrics accurately. Very Fine Pick Glass with Pointer. Metal Body, size: 5.3 x 4.6 x 1.4 cm. Magnification: 6x. WEIGHT: 56±4 gms. DIMENSIONS: 0.5" x 0.25" x 1" Base
4	The equipment is used to determine the thickness of fabrics digitally. Maximum capacity 10 mm & accuracy 0. 01mm. Portable & handy to carry anywhere. Digital readout of thickness in millimeter. Supplied with two pressure feet for different pressure. A dead weight is provided with the instruments as per requirement of standard pressure. Supplied with calibration certificate. Range of measurement: 0 - 10 mm Least count of dial gauge : 0.01 mm Diameter of anvil : 60 mm Diameter of pressure foot (Interchangeable) 10 mm & 25 mm Applied Pressure : 4.14 kpa or 23.4 kpa Throat depth : 22 mm. ASTM Standard – D1777-96
5	For accurately determining fibre length characteristics including effective length and percentage of short fibre.2.5 % and 50% span length. Measuring Principle: Baer sorter method Measuring range: Up to 50 mm (2 inch)Comb Spacing: 6 mm Top and bottom comb setting: 6.35 mm Row of top and bottom middle setting: 3.2 mm Number of top Comb: 3 Nos Number of bottom Comb: 6 Nos Test specimen size: 50 mg Applicable standards: ASTM D1440 and BS 4044 Physical Dimensions: Size (WDH): 220 x 120 x 120 mm Weight: 4 kg (Accessories included)A clamp, velvet mat, supporting rods and combs provided.
6	Table Top Machine. Noise free, long life indigenous Blower Motor Outside fitted. Mini carding like machine with built in motor and two stage filters. Detachable feed tray and dust collection tray are provided. Operates on a superior aerodynamic lint/trash separation and new collection technique provides the micro dust present in Cotton sample. Emergency Stop for the Safety of the Operators. Feeding Quantity :50gms to 100gms. Main Motor: 1.0 HP/ 3 Phase Motor, 1440 RPM Blower Motor: 1.0 HP/ 3 Phase Motor, 2880 RPM Our Scope of Supply: Machine, Blower.
7	Specialized equipment to determine the draping/hanging Phenomenon of fabrics in numerical form. Smooth precision engineered components for excellent performance. 1000w halogen lamp used for exposing the sample to be tested. With specially designed developing chamber. Supplied with complete instructions to calculate drape co-efficient. Complete with all accessories-ammonia paper, template etc. Supplied complete with Calibration certificate (traceable to NPL). Light source: 1000 W halogen tube. Size of specimen support unit: 125 mm diameter x 60 mm height. Size of test specimen: 250 mm diameter. Panel board dimensions: 60x90x140 mm. Size of Acrylic sheet: 365x380 mm. Size of exposing chamber: Length x Depth x Height 400mm x 400mm x 800mm. Size of developing chamber 400mm x 400mm x 200mm. Overall dimensions of Instrument 400mm x 400mm x 110mm 16” x 18” x 40”.Net weight of the Instrument: 36.6 kg. (80.52 lbs). BS 5058 standards.
8	Truly Portable Instrument. Micro Controller Based & User Friendly. Facility to enter name and lot number. Large LCD screen - to view result. Print out of completed test series result from the built-in mini printer. Facility to view and print the completed test result during any No. Of. Test (Max.10.Nos). No Need of compressor air and A.C. Mains Supply. Can be used to the places where ever required. Measuring range: 2.0 to 6.5 µg/inch (Microgram/Inch) Test Parameter: Micronaire Sample Size : 4.0 +/- 0.1 grams Test time : 20 sec approx. Accuracy : +/- 0.1 ug/inch ASTM-D1448-11
9	To determine the crimp of Texturized yarn / yarn affected by knitting or weaving. Sliding weight acting on a lever arm range from 0 to 25 gm. Maximum crimp extension up to 125 mm can be measured. Gauge length of yarn can be set up to 400 mm. Supplied with calibration certificate Traceable to NABL. Load on yarn: 3-20 gm Extension scale: up to 125 mm Gauge length of yarn: up to 440 mm. Dimensions of the unit: 770 (L) x 120(W) x 140 (H) mm. 30.50 (L) x 4.75 (W) x 5.5 (H) inch. Weight of the unit : 15 kg (33 lb.). ASTM D3937-12
10	Test specimen 44±1mm×4. Load-595G,795G. Counter/Timer LCD, 0-999999. Machine Size58.5×56.5×32.5cm. Weight67kg. Power 1ø, AC220V,1.5A. Main Unit: 01 No. Top Moving Plate : 01 No. Sample Cutter Template (140mm) : 01 No. Sample Cutter Template (38mm) : 01 No. Abrading Platform Clamping rings : 04 Nos. Abrading Platform Clamping nuts : 04 Nos. Numbered Specimen Holder Set : 04 Sets. Dead Weight (9kpa) (for apparel testing) : 04 Nos. Dead Weight (12kpa) (for upholstery): 04 Nos. 10. Loading Pin: 04 Nos. 11. Metal Pen to make Lissajous Figure of Abrasion: 01 No. Required 4 test specimen according to standards. ASTM D4966.
11	Latest design computer interfaced projection microscope for fiber & yarn analysis. With maximum resolution of 1500X.With 5-mega pixel digital camera to capture the magnified photograph of the object. Photos of all fibers longitudinal & cross-sectional view are loaded in software to identify the fibers without prior knowledge in the same. Any type of measurement like length, area, count of any fine textile fiber can be done. Mains Supply: 230 + 10%, 50 HZ, 1 Phase AC Supply. Magnification Power: 150x, 300x, 600x & 1500x Objective: 4x, 10x, 40x & 100x.Light Control: Invariably controlled Light Intensity Meter. Mechanical Stage: Graduated Mechanical Stage with X & Y (Forward & Backward Movement and Left & Right Movement). Coarse Focus Adjustment: With a Knob (Bigger Knob). Fine Focus Adjustment : With a Knob (Smaller Knob). Light Condenser Movement: Up/ Down with a knob Light Centering : With three long screws. Stage Micrometer : 1 mm Scale with 0.01 mm Accuracy. Overall Dimension: Length Depth Height 304 mm 203mm 457mm: 11.96 inch 8 inch 18 inch Net weight of the unit: 10 kg (22 lb.). With software and PC.
12	Microprocessor based programmable equipment used to determine the twist per inch/cm in single yarn, double yarn & open-end yarns. Special adjustable tensioning device provided to give tension to the yarn while testing. With Adjustable Motor Speed. Feather touch operational keys with LCD Display.1 to 50gm Tension weight supplied to give proper tension during testing. Yarn bobbin stand is supplied to rest and draw the specimen yarn while testing. Supplied with calibration certificate. Power Supply : 220 / 230V, 50 Hz. AC Single Phase. Display : LCD digital display Maximum Test Length : 50 cm/ 20 Inch. Tension Weight: 1gm, 2gm, 5gm, 10gm, 20gm, 50gm. Dimensions : 1130 x 488 x 380 mm Gross Weight : 20 Kg. ASTM D1423.
13	Moisture Regain Oven, used for conditioning of various textile samples of fibre, yarn, lea, fabric, etc., prior to testing. This unit is having facility to control &maintain suitable temperature & humidity inside chamber. This Unit is having approx. size of 15” x 15” x 15” Inside dia., with 2 shelves of S.S., inner chamber of S.S.(stainless steel) and outer chamber of powder coated M.S. (mild steel) Proper insulation is provided in between walls of inside & outside chambers. Unit consists of heating & refrigeration system for controlling temperature & suitable arrangement for humidity control with air circulating fan.Control panel consists of MAINS, Digital temp. controller, Digital Humidity Controller, neon indicators, etc. Unit is provided with castor wheel for easy movability. Temperature Range: 5 to 50 Deg. C. Humidity: Ambient to 95% +/- 3%.The is supplied complete with digital display, forced air circulation, etc. ASTM D4442-20.
14	Conventional Wrap Block is highly reliable and accepted by all technical personnel in the textile industry Accurate 1 yard circumference, high quality M.S. (mild steel) Chrome plated drum to measure hank measurement in Sliver and Roving. An Electronic Preset table counter with alarm for completion of counts is provided. Hand Operated Wrap Block.
15	Speed of rotation of Boxes: 60 RPM (+2 Rpm) Size of test Specimen: (250x125) mm No. of boxes : 4Boxes Dimension of Boxes(inner): 235x235x235mm Size of Rubber Tubes : Length 140mm+1mm : Diameter 31.5mm +1mm : Wall Thickness 3.2mm+0.5mm : Weight 52.25gms+1gm Motor : 1/4H.P.Single Phase GEARED MOTOR Digital Counter: 0-99999/L.C-1 Scale for checking the pillness rating and sample holder required. ASTM D3512/D3512M-16
16	Very delicate & sophisticated instrument with auto calibration, stability indication and auto backlight. Weighs up to 600 gm with accuracy of 0.01 gm Weigh unit switchable: GSM, gm, ct, gn, lb, pcs etc. Complete with Acrylic cover for error free reading. Users’ friendly Bigger LCD and pan size Complete with accessories as A.C adaptor. Supplied with all accessories. Capacity: 600 g Least count: 0.01 g Power source: Adaptor supply 10 V/500 mA Operating Temperature: 0-40° C Overall Dimensions of the unit: Length Depth Height 305mm 254mm 254 mm 12-inch 10-inch 10 inches Net Weight of the Instrument: 2.5 kg (3.74 lb.). ASTM E898-20.
17	Specially designed digital model to be used to conveniently make Skeins (lea/hank) of yarn Digital control panel with resettable revolution counter. Supplied with 1 meter or 1.5-yard wheel as per customer demand. Specially designed bobbin holding stand, which can accommodate bobbins die up to 100 mm. Bobbin’s stands, is equipped with a yarn-tensioning device. Five Skeins (lea/hank) can be made together. Complete with all accessories. Swift/wheel circumference: 1.5 yards or 1 meter. Number of leas made at a time: 5. Spread of each lea: 20mm + 5. Counter (Three digits): Digital pre-set counter with sensor. Operating speed: 100 + 2 rpm Motor: 1/8 HP 230V geared motor. Overall dimension of the unit: 650 (L) x 500 (W) x 670 (H) mm. Net weight of the unit: 38 kg (83.7 lb.). Overall dimensions of cone unit: 440 (L) x 390 (W) x 515 (H) mm Net Weight of cone unit: 7.5 kg.ISO 2060, ASTM D1907/2260, BS 2010
18	Computerized fibro graph able to measure 2.5% and 50% span length, upto 50mm fibre length, indicates uniformity ratio & fibro graph, additional two span length selectable, selectable two pre-determined fibre amount at par, predicts fibre quality index and yarn CSP at various mixing. It is based on microelectronic mechanical system and optical scanning technique.With software, PC and printer. ASTM D1447-89.
19	Specialized equipment to determine the Flammability of the Fabric. With fine gas control system to regulate the flame length. Movable sample mounting mechanism to adjust the sample as per standards. With specially designed digital resettable timer. With transparent acrylic door for removing external interferences. Supplied with all accessories. Supplied with Calibration & Inspection Certificates and detailed user manual. Power supply: 220V AC, 50 Hz, 1-j. Flame source: L.P. Gas. Gas cylinder & regulator: General (LPG). Gas pipe: 1.5 meter. Multipurpose gauge: 16 mm, 19 mm, 8 mm. Movement of platform: Manually operated by bearing wheels. Specimen cutting template: 150 mm x 500 mm. Flame length: 16 mm. Burner specimen distance: 8 mm. Specimen holder receiver tray position: 45° Angle. Equipment door: Acrylic made (Open able upward). ASTM D635.
20	Frame Construction: Stainless steel. Load on the Test Specimen (As per ISO 105E01): 5 kg. Size of Test Specimen: 100 mm x 40 mm. Size of Acrylic Separator Plates: 115 mm x 60 mm. Number of Separator Plates: 21 Nos. Dimensions of the Unit: 125 mm x 105 mm x 90 mm Net weight of the Unit: 13kg. Load on the Test Specimen (As per AATCC 106): 4.5kg. Can also be used for testing color fastness against sea water and water. Made of stainless-steel frame. A different load for AATCC standards is available on request. User friendly and corrosion resistant. Smooth precision engineered components for excellent performance. Scale required for checking the color fastness.
21	Latest model electronic Crock METER used to determine the colorfastness of Textile to dry or wet rubbing as per AATCC & ISO requirement. Easy to use, polycarbonate dual specimen clamps for fabric as well as garment Testing. Diameter of the finger (for fabrics & textiles): 16 mm Force on the finger (for fabrics & textiles):9 Newton. Size of crocking cloth: 5 x 5 cm. Size of crocking cloth (for furnishing fabric): 7 x 7 cm Length of the traverse of the finger: 104 ± 3 mm. Microprocessor based counter: 0 – 999, (Least count: 1) Overall dimension of the unit: 540 (L) x 390(W) x 245(H) mm Net weight of the unit: 21 kg. ASTM F1319.
22	To determine the Color Fastness to Washing or Dry Cleaning. Latest Ergonomic design with customer friendly control panel. Adheres to both European and American standards. Temperature up to 95 C with a Digital Temperature Controller. Digital Timer with automatic shutdown & audible warning. Inching facility for loading and unloading the beakers.4 Beakers 550ml ± 50 ml. (For ISO) and 4 Nos. 1200ml Beakers for AATCC. Supplied with complete accessories to conduct the testing immediately after receipt. Inner dimensions of the Main Bath: 378 X 525 X 525 mm. Capacity (in liters) of Main Bath: 44 Liters (Approx.). Number of Beakers (Test Vessels): 08 Nos. (4 for ISO and 4 for AATCC). Standard Seal for Beakers: 08 Nos. Special Neoprene Gaskets. Volume of each Beakers as per ISO: 550 ± 50 ml (4 No’s). Volume of each Beakers as per AATCC: 1200 ± 50 ml (4 No’s). Speed of Rotation: 40 ± 2 rpm. Temperature Controller: PT-100 Type (up to 99.9 C). Temperature Regulation: ± 2.0°C. Timer (Digital): 0-99 minutes, Least Count: 1 minute. Geared Motor: ¼ H.P, Single Phase. Scale required for checking the color fastness.
23	An effective and essential fabric & garment testing equipment. It is used to determine the color fastness and degradation of textiles to Sunlight. This standard model comes with Xenon lamp. Automatic voltage stabilizer. Stainless steel clamps. Gray scale for assessing change in color & L-4 standard @ extra cost. Light Source: 4200 Kelvin, Xenon Lamp. Test Chamber Temperature: Ambient to 60° C. Temperature Range Control: By air Circulation, Type ‘A’ rectangular cells. Maximum Number of samples: 24 Nos. ‘A’ Rectangular Cells. Maximum Space per Type: 110 x 50 mm ‘A’ Rectangular Cells. Specimen Thickness: Up to 1.5 mm. Specimen size: 100 x 50 mm. Working Life of Lamp: 2000 Hours. Power: 220 Volts, single Phase, 50 HZ, A.C. Supply. Power Consumption: Maximum 1 KW. Water: Use of Distilled Water only in the water circulation Unit for humidity and spray. Dimension of the Unit: 450 mm(W) x 450 mm(D) x 650 mm(H)Net Weight: 50 kg. Required outside Temperature: 10° - 24°C. Temperature Required outside Humidity: 60% to 70% Humidity. Humidity Control: Inserting Saturated Solution in the type ‘A’ Cells. 1-8 blue wool standard samples.
24	An accurate determination of sample length. An accurate determination of its weight. Balance: precision jewel bearing. Template: brass polished. Overall dimension: 20"x 9"x 7". Gross weight: 5kgs. Colors: grey/ metallic blue. Leveling: metallic chrome, leveling screw. ASTM D2260
25	Small size, Wideband output with three sound profiles, High output per unit volume. Full-spectrum sound. Multiple sound signatures. Low magnetic radiation. 6.1kHz to 11.8kHz frequency. 101dBA to 106dBA sound pressure level. 46.3O to 135O impedance.
26	One scale may read from 0.1 to 1.0 to give the hank of a 4-yard sample of sliver. The Second scale may read from 0.1 to 0.6 for 20-yard samples of roving. The Third scale may read from 4s to 80s for 840-yard samples of yarn.
27	ELMENDORF TEARING STRENGTH TESTER, to determine the ballistic tearing strength of woven fabrics, plastic films, paper, Textile Elmendorf Tearing or other similar materials. Measuring pendulum range 16N, 32N, 64N Unit of measurement CN, N,gf, lbf Distance between Clamps 7.0 ± 0.25 mm Tearing Distance 43 ± 0.15m Slit Size 20 ± 0.2mm Tolerance range 20-80 % of each full scale, settable range or full-scale Angular resolution high resolution digital optical encoder Display LCD display backlight Blade steel Data port RS232 port for printer connection and 3 pin Mini-DIN connector for PC. Statistics V%, St. Deviation, Range % Template Size As per ASTM D1424 standard Dimensions 490 x 430 x 680 mm Power supply 220V, 50Hz Weight 60KG. Template and scale required with the machine.
28	Specially designed instrument to determine tensile strength of fabrics. ? Capacity 250 Kgs with accuracy 100 Grams ? The equipment works on CRE principle. ? With user friendly digital control panel. ? Maximum jaw separation 600mm & minimum jaw separation 25m. ? Control panel has peak & zero setting option. ? Runs on advanced software with an easy to operate user interface and user-friendly control panel. Principle: Constant Rate of Extension (CRE). Load Capacity: 0.5-2500N. Test Speed: 1-999 mm/min. Gauge Length: 0.1-500 mm. Force Resolution: 1/10,000. Force Accuracy: =+/-0.5%. Walking space: 800 mm (it can be custom-tailor according to their requirements). Force Unit Switch: Kgf, N & Ibf. Stop Mode: Emergency stop button, Overload stop, specimen damage automatic stop, upper & lower limit set automatic stop. Main Power OFF Machine Drive: Servo motor drive, synchronous wheel and precision ball screw drive. Power: 400W. Power Supply: 220V 50/60HZ 10A. Dimensions: 72 x 62 x 140 cm (W x D x H). Weight: 150 kg. ASTM D5035. Yarn jaw and Fabric jaw required.
29	Hand operated and noise free movement. Highly accurate test results under uniform load. Smooth Dial Movement with brass bush. Uniform load by weights on samples for Evenness in testing. Firm hold of test specimen by Stainless Steel. Spring loaded clamp. Circular disc with locking pin for safety. Dimension of test specimen: 40 x 15 mm Creasing load: 1.0 kg, 500 gm. Distance between edges of the clamp to the axis: 2 mm. Angle measurement: 10 to 180° x 1°. Template Provided. Tongue to mount sample provided. IS 4861 : 1981
30	Angle of inclination of intersecting plane to horizontal: 41., load on test specimen: 10+2 gm / cm, balancing length scale: 0-16 cm, L/C:0.1 cm, overall Dimensions: length width height, of the unit 275mm 140mm 200mm. This instrument directly gives the bending length to calculate bending modulus & flexural rigidity from calculation. Top scale graduated in 0-16 centimeter, weight 270gm strictly meets the specification of ASTM D1388-18 standard. Provided spirit level for checking the leveling. Metal based for long life & durability. Supplied with complete accessories-two templates for preparing sample. Supplied with calibration certificate.
31	It should have Touch Screen Panel and inbuilt Printer for direct results print out, suitable to test various fabrics, including industrial fabric, non-woven fabric, air filter paper, coated fabrics, etc. It should be a floor mounted model with castor wheels for easy movability. The test principle and results generated by it should meet almost all international standards for air permeability mentioned in ASTM D737;ASTM D3574;ENIS0 7231;ENISO 9237;BS 5636;DIN 53887.Test time: 20-30 sec approx., Accuracy: <±2%; Pressure: 0-3000Pa,Test area: 20 cm2-38 cm2, Test range: 0.2-12826mm/s.
32	Computer-controlled portable instrument ALAMBETA for the fast AND NON- DESTRUCTIVE measurement of transient and steady-state thermo physical properties (thermal-insulation and thermal-contact properties) of any compressible materials, especially plain textile fabrics. The instrument measures the sample thickness also. Results are statistically treated. Supply 110 V / 230 V, 100 W, weight 8 kg. Measured parameters of fabric: thermalresistance R: 0,005 to 1,0m2K/W(0,05 to 10 TOG, 0,03 to 6 CLO) at the adjustable contact pressure 100 – 500 Pa, thermal conductivity ?:0,00 to 2,0W/m/K ,sample thickness h: 0,15 to 25mm, up to 35 mm at lower precision peak level of the contact heat flux qmax [W/m2/K] ratio between the qmaxand steady state heat flux P [1 - 5] ,thermal diffusivity[m2/s] in any range for common plastics and textiles thermal absorptivity b: 20 to 1000 Ws1/2/m2/K – a new parameter for the objective evaluation of warm-cool feeling of plain textile fabrics non destructive testing up to the full garment thickness 25 mm or more at lower precision – no need to cut a special specimen. The instrument principle satisfies the Iso standard 8301.
33	Water Vapor Permeability Tester is used to determine the resistance of textiles and textile composites to water vapor penetration under room condition.RF4319 water vapor permeability tester consists of 8 test cups with water reservoirs and a precision drive system. Test Cups Moving Speed 2rpm, Test Cup 8 units, Power AC 230V, 50Hz/60Hz, Dimension 810(L) x 410(W) x 250(H)mm, Weight Approximate 17kg.