Construction Of Grampanchayat Office Building At Patharshet
Tender Value
Ref. Documents
Estimated cost
Bid Submission
13 Oct 2022
0 days left
EMD
13000
Bank guarantee accepted
Document Fee
590
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mulshi → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Grampanchayat Office Building At Patharshet
BOQ
| Sl. No. | Item Description |
| 1 | Item No. 1: Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means |
| 2 | Item No. 2: Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Mean |
| 3 | Item No. 3: Excavation For foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming watering including shoring and struttingetc. Complete ( lift upto 1.5m) By Mechanical Means... |
| 4 | Item No. 4: Excavation For foundation in Hard rock by chiselling, wedging, line drilling, etc.including trimming and levelling the bed,removing the excavated material upto a distance of 50 metres beyond the building areastacking as directed,dewatering and back filling with available earth/murum, watering iramming etc. Complete ( lift upto 1.5m) By Mechanical Means... |
| 5 | Item No. 5: Providingdry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. Complete… |
| 6 | Item No. 6: Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate ( Crushed sand VSI Grade finely washed ) |
| 7 | Item No. 7: Providing and laying in situ /Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) |
| 8 | Item No. 8: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) |
| 9 | Item No. 9: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) |
| 10 | Item No. 10: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed ) |
| 11 | Item No. 11: Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks compacting , curing , finishing and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC WITHOUTSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade finely washed) |
| 12 | Item No. 12: Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 13 | Item No. 13: Providing cement based water proofing treatment to terraces (Indian water proofing or alike ) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M. 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with average 20 mm. thick layers of same mortar added with jute fiber at 1 kg per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking Finished surface with False squares of 300mm x 300mm. making the junctions at the parapet rounded and tapered top for required height with drip mould at the junction of plaster and parapet and curing and covering 10 yearsGuarantee againts leakproofness on Court fee stamp paper of Rs. 500/- including ponding testetc. complete... |
| 14 | Item No. 14: Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete. |
| 15 | Item No. 15: Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing outwater manually, striking joints on unexposed faces, raking out joints on exposedfaces and watering etc. Complete... |
| 16 | Item No. 16: Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including strikingjoints, raking out joints, watering and scaffolding etc . Complete…. |
| 17 | Item No. 17: Providing internal cement plaster 20 mm thick in a single coat in cement mortar 1:5 without neeru finish to concrete, surface, in all positions including scaffolding and curing etc. complete. |
| 18 | Item No. 18: Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. |
| 19 | Item No. 19: Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all position with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:11/2:3 including scaffolding and fourteen days curing etc. Complete... |
| 20 | Item No. 20: Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe having overall dimension ? 95 x 38.10 x 0.90 mm at weight 0.637kg/Rmt. withwindow frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with allrequired screws and nuts etc, complete. With colour Anodisingwithout box... Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing the sharp edges wherever necessary, curing,etc. complete. |
| 21 | Item No. 21: Providing and fixing solid core flush door shutter in doubleleaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete. |
| 22 | Item No. 22: Providing and laying vitrified mirror / glossy finish tiles decorative typehaving size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 ( group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearingetc. Complete. A) Flooring |
| 23 | Item No. 23: Providing and laying Antiskid Ceramic tiles of approved qualityof size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. Complete. |
| 24 | Item No. 24: Providing and laying in position flooring of telephone black / Amba white /Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1 : 6 cement mortar includind cement floats striking joints, pointing in C. M. 1 : 3 Curing and cleaning etc. Complete.... |
| 25 | Item No. 25: Providing andapplying two coats of exterior white weather shieldpaint of approved manufcture and of approved colour to the plastered surfaces including cleanning preparing the plaster surface, applying primer coat , scaffolding if necessary, and watering the surface for two days etc. complete...NOTE :- For Item No. 15 to 18 prior approval of Superintending Engineer will be necessary... |
| 26 | Item No. 26: Providing and applying plastic emulsion paint of approved quality, colour and shade to old surface in three coats including scaffolding, preparing the surface. (excluding primer coat) etc. Complete…. |
| 27 | Item No. 27: Providing and fixing 1st class white glazed earthenwater Orissa Type W.C. Pan 580 mm dia including P or S trap cast iron soil and vent pipe upto the outside face of the wall (1:5:10 ) cement concrete bedding 15 mm thick, 10 liter P.V.C.Flushing cistern with all necessary pipe connection etc.Complete... |
| 28 | Item No. 28: Providing and fixing H.D.P container Syntex or alike one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters |
| 29 | Item No. 29:Providing and laying in trenches 15 mm dai.medium grade having embossed as ISIMark galvanised iron pipes of 1.25 kg/meter necessary excavation, fittings.remaking good the demolished portion with filling trenches and with primer of anti - corrosive oil paints, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete... |
| 30 | Item No. 30: Providing, laying and100 mm. dia. salt glazed stoneware pipe including fittings such as bends tees, single junction, double junction laying, jointing (including excavation and refilling the trenches) complete.... |
| 31 | Item No. 31: Providing, laying and fixing P.V.C. pipe of 75 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete. |
| 32 | Item No. 32: Providing and fixinghume pipe septic tank 900mm diameter with vent pipe and cap including necessary (including excavation and laying )… |
| 33 | Item No. 33: Providing and fixing whiteglazed earthenware Wash Hand Basin of 55cm x 40 cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connections including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.... |
| 34 | Item No. 34: Providing and fixing15 mm dia screw down bib/ stop tap of brass including necessary socket union nut complete… |
| 35 | Item No. 35: Providing andfixing 8cm C.I. Nahani Trap including C.I. grating bend and piece of C.I. pipe upto the outside face of the wall complete…. |
| 36 | Item No. 36: Providing and fixing M.S. grill door 24 kg/sqm of various size as per detailed drawings without hot dip coating, iron fixtures and fastenings and 3 coats of oil painting etc. |
| 37 | Item No. 37: Providing and fixing board displaying information, such as \"Name of work, Tender cost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made up of 4 mm aluminium composite pannel sheet with 0.5 mm skin thickness on either side bonded with white retro reflective sheeting of class B (Type IV High intensity micro-prismatic grade sheeting - HIP) having pressure sensitive adhesive retro reflective sheeting with specified background, border and back side reto reflective symbols, letters, numerals, arrow as per IRC : 67-2012 Table No. 8.3, on M.S. angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Class B ( Type IV High intensity micro - prismatic grade sheeting - HIP) shall have 7 years written warranty from the manufacturer including the Digitally Printed areas with Latex printing technology with sheeting manufacturer approved inks and laminated with UV overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/ supplier... Spec. No. As directed by Engineer in Charge |
| 38 | Item No. 38: Royalty Charges for HARD MURUM. Rate = Royalty + surcharge (2%) (211.95 + 4.23 = 216.18 Per Cum) |
| 39 | Item No. 39:1 BRICKS Water Absorption (Set of 5 Bricks), CompressiveStrength( Set of 5 Bricks), Efflorescence (Set of 5 Bricks). |
| 40 | Item No. 40: CONCRETE Compressive Strength OF C.C. Cube(Set of 3 cubes). |
| 41 | Item No. 41: MORTOR Compressive Strength.( Set of 3 Cubes) |
| 42 | Item No. 42: STEEL BAR TESTING Upto 16 mm(Set of 3 Bars) |
AI Tender Summary
Tender Timeline
Sep 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 13, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender