|
| 1 | Surface excavation not exceeding30 cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and as directed. |
| 2 | Excavation in trenches not exceeding 1.5 m wide and 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed. |
| 3 | M&L for natural river sand as cushioning of cables including spreading and punning downcomplete all as specified and as directed.Note :- Punned thickness shall be measured for payment purpose |
| 4 | Returning, filling in, including spreading levelling watering and well ramming in layers not exceeding 25 cmas in soft/loose soil complete all as specified and as directed. |
| 5 | Removing excavated soilto a distance exceeding 50 m but not exceeding 100 m anddepositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed. |
| 6 | M&L for broken stone hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 7 | M&L for cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed. |
| 8 | M&L cement concrete 1:2:4type B-0 using 12.5mm graded stone aggregateas in lintels upto 1.5m clear span,chajjas, roof kerbs or mud stops, rounded or chamfered on edgesand other similar work complete all as specified and as directed. |
| 9 | M&Lfor brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar1:6 complete all as specified and as directed. |
| 10 | Supply and laying fly ash brick of size 200x100x80mmlocallly available as protection of cable in trenches complete all as specified and as directed. |
| 11 | Cutting holes in brick wall built in cement mortar not exceeding half brikc thick for inserting hold fastand making gooddismantled portionin cement mortar 1;3 or in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate complete all as specified and as directed. |
| 12 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and applying cement slurry @3 kg/Sqm complete all as specified and as directed. |
| 13 | M&L for 100 mm thick cement concrete1:3:6 typeC-2using40 mm graded stoneaggregateas subbaseof floor/hardstanding/path etc, surface finished evenrough to receive furtherfinishes complete all as specifiedand directed |
| 14 | M&L for 100 mm thick cement concrete1:2:4 type B-2using40 mm graded stoneaggregateasin floor/hardstanding/path etc complete all as specifiedand directed |
| 15 | M&L for chequered cement concrete tiles30 cm x 30 cm x 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigment over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and as directed. |
| 16 | Taking down cement plaster on brick or stone wall etc including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed. |
| 17 | M&L 15 mm thick renderingon brickwork or concrete surfaces in cement mortar 1:4,surface finishedeven and fair complete all as specified and as directed. |
| 18 | M&L for applying two coats of weather proof acrylic emulsion paint exterior grade (100% acrylic) of silver steak shade of asian paint over a coat of primer including preperation of newly plastered external surfaces of walls of any description over 10 cm width or girth etc on column/ pillars, RCC chajja and facia complete all as specified and as directed. |
| 19 | M&L for providing and fixing stainless steel tube (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size on the top of floor or the side of waist slab with suitable arrangement complete all as specified andas directed. |
| 20 | S&F stainless steel hand rail ball ( Grade 304) 50mm dia on top of stainless steel tube andfixing arrangements complete all as specified and as directed. |
| 21 | M&L for 40 mm dia bore galvanised iron light gradefor cable protection and sealing both ends complete all as specified and as directed.Make:- Tata/ Jindal/ Prakash Surya. |
| 22 | Supply, laying, jointing and testing XLPE Cable insulated, armoured, earthed, heavy duty electric cable with aluminium conductor , 1100 Volt grade, cross sectional area 10 sqmm 4 core including necessary cable lugs, glands, insulation tapeetc complete all as specified and as directed.Make:- Paragon/Gloster/Havells/Polycab |
| 23 | S&FGarden light 40 watt LED CORAL (Opal), IP-65 new generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun alluminium landscape luminaire with high power LEDs as light source including40 mm dia galvanised iron pipe having 3.0 M lengthwith suitable size of nuts, bolts , washers etc including connection with three core flexible copper wire of suitable length from junction box to light fitting complete all as specified andas directed.Make :- Havells Model No. CORALPT40WLED757PSYMTOPC or equivalentin Phillips/Crompton Greaves/Bajaj as approved. |
| 24 | S&F250 W LED flood light of die-cast aluminium body, IP66protection, heat resistant toughened clear glass cover with reflector and all accessories complete with all accessories as required complete all as specified and as directed . Make :- Crompton Greaves Cat Part No:LSFO-250-CDL/60 or equivalent inPhilips/ Havells |
| 25 | S&F of street light terminal boxes made out with SMC material, shock & dust proof of inside size 295x195x100mm as per IS and including 100Amp, TPN busbar fixed on insulators, 01 No 10Amp, SP MCB, earth termination with nuts & bolts and including 02 sets offlat iron25x6mm clamps of suitable size with nuts, bolts and washers including two coats of aluminium paint over a coat of primer on exposedsteel surfaces complete all as specified and as directed. |
