3 Infrastructure Development Work Of Icds Centre At Choonabhutti Tg Lower Line Andchoonabhutti Tg Upper Line Basbari Of Chamurchi Gp Within Banarhat Block, Jalpaiguri.
Tender Value
2.08 Lakhs
Estimated cost
Bid Submission
11 Oct 2022
0 days left
EMD
4162
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
banarhat → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
3 Infrastructure Development Work Of Icds Centre At Choonabhutti Tg Lower Line Andchoonabhutti Tg Upper Line Basbari Of Chamurchi Gp Within Banarhat Block, Jalpaiguri.
BOQ
| Sl. No. | Item Description |
| 1 | PWD-WB SOR Page No. 11, Item No. 10Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within alead of 75m as directed. |
| 2 | PWD-WB SOR Page No. 9, Item No. 6Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging thebase and removing rubbish as directed within a lead of 75 m.a) In ground floor including roof. |
| 3 | PWD-WB SOR Page No. 14, Item No. 1Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 4 | PWD-WB SOR Page No. 35, Item No. 22 (ii) (a)(II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. VarietyIn ground floor(a) 1:3:6 proportion |
| 5 | PWD-WB SOR Page No. 26, Item No. 10 (ii)Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(ii ) River Bazree |
| 6 | PWD-WB SOR Page No. 43, Item No. 40 (ii)Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m(i) Tor steel/Mild Steel(I) Other than steel(1.2% of 7.202 m3) |
| 7 | PWD-WB SOR Page No. 42, Item No. 36 (f)Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor)(f) 25 mm to 30 mm shuttering without staging in foundation |
| 8 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In-Charge. |
| 9 | PWD-WB SOR Page No. 16, Item No. 16125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. |
| 10 | PWD-WB SOR Page No. 189, Item No. 1Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]ii) With 1:4 cement mortar (For Exterior Wall)(b) 15 mm thick plaster (For repairing) |
| 11 | PWD-WB SOR Page No. 48, Item No. 6 (i)Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). Using grey cement(i) 20 mm. thick |
| 12 | PWD-WB SOR Page No. 192, Item No. 15Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.NOTE:Cement 0.152 cu.m per100 sq.m. |
| 13 | PWD-WB SOR Page No. 104, Item No. 13 (i)(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.(i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. |
| 14 | PWD-WB SOR Page No. 101, Item No. 2 (a) M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. |
| 15 | PWD-WB SOR Page No. 197, Item No. 15Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer\"s specification.In Ground floor:(iii) Two coats. |
| 16 | PWD-WB SOR Page No. 194, Item No. 1 (b)White washing including cleaning and smoothening surface thoroughly.(b) Two coats (to be done on specific instruction). |
| 17 | PWD-WB SOR Page No. 200, Item No. 2 (a)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :(a) On timber or plastered surface :With super gloss (hi-gloss) –(iv) Two coats (with any shade except white) |
| 18 | (b) On steel or other metal surface :With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) |
| 19 | PWD-WB SOR Page No. 81, Item No. 9Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)(i) In Roof:-a) With 0.60 mm thick sheet |
| 20 | PWD-WB SOR Page No. 81, Item No. 10Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping)(a) With 0.60 mm sheet |
| 21 | PWD-WB SOR Page No. 11, Item No. 8Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc. and stacking the material at site as directed. |
| 22 | PWD-WB SOR Page No. 1, Item No. 1Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed. |
| 23 | Repairing of Electrical Works & Labour Charge |
| 24 | Repairing of S & P Work & Labour charge (as per S & P Schedule) |
| 25 | Painting and Bala Work & Labour Charge |
| 26 | Supply fitting and fixing of Singboard and cost of photograph (payment will be made as per voucher |
| 27 | Add:- GST @ 12% |
| 28 | Add:- Cess @ 1% |
AI Tender Summary
Tender Timeline
Sep 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 11, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 14, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender