|
| 1 | Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Chequred cement concrete tiles 30 cmx30 cmx25 mm thick heavy duty with epoxy coating & ultra finished, any coloured (with grey cement and pigment),jointed and pointed in neat cement slurry in floors complete all as specified and directed. |
| 3 | M&L for 12mm thick heavy duty outdoor matte finished ceramic tiles in any colour, size & design etc for parking, footpath, pedestrian etc and similar location, of size 300x300, jointed and pointed in neat cement slurry complete all as specified and directed. |
| 4 | M&L for 20 mm thick screed bed or bedding layed for tiling work (parking tile, foothpath tile, chequered tile etc) in cement mortar 1:6 complete all as specified and directed. |
| 5 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded or pointed in cement mortor complete all as specified and directed. |
| 6 | M&L for Machine pressed rubber moulded coloured (with grey cement and pigment) precast concrete interlocking paver block, ultra finished with epoxy coating any shape and sizeISof 60mm thickness M-35 Grade complete all as specified and directed. |
| 7 | M&L for 50mm Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 8 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like vertical surfaces in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including 10 mm thick rendering in CM 1:4 for receiving Granite work complete all as specified and directed. |
| 9 | Demolition of cement concrete of any description and any position not otherwise specifically provided for and removing to a distance n.exc 500m etc, complete all as specified and directed. |
| 10 | M&L for PCC type B-1, 1:3:6 (using 20mm graded aggregate) as in coping including water through and the like weathring, slightly rounded or chamferred angles and throating complete including formwork complete all as specified and directed. |
| 11 | M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in floor, finished concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L cement concrete type C-2, 1:3:6 using 40mm graded stone aggregate of 75 mm thick in floors complete all as specified and directed. |
| 13 | M&L for Pre- cast factory made heavy duty kerb stone of PCC 1:2:4 type B1( 20mm graded stone aggregate) of size 300x300x150mm fixed in CM 1:4 mortar with min 10mmjoints ,complete all as specified and as directed. |
| 14 | Demolitionof brick work or stone / boulder masonry, built in cement mortar incl all qunins, arches, pillars etc but excluding ashlar facing dressed stone work & precast concrete articles complete all as specified and directed. |
| 15 | M&L for brick work with sub-class \"B\" bricks straight or curved on plan exc. 6mm mean radius built in cm (1:6) complete all as specified and directed. |
| 16 | All as per Item No. 14 here-in-before but but except brick. |
| 17 | M&L for brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick wall built in cm (1:4) complete all as specified and directed. |
| 18 | Taking down cement plaster on brick or stone walls incl raking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 19 | M&L for rendering 15mm thick of fair faces of brick work/concrete surfaces to be finished even and smooth with out using extra cement in CM 1:4 complete all as specified and directed. |
| 20 | M&L for rendering 15mm thick other than fair faces of brick work/concrete surfaces to be finished even and smooth with out using extra cement in CM 1:4 complete all as specified and directed. |
| 21 | M&Lpreparation of newly plastered wall surfaces and applying two coats of cement base paint by using with fully automatic airless spray technology max pressure 3300 PSI with single spray gun on newly plastered / untreated wallsurfaces complete all as specified and directed. |
| 22 | Dismantling structural steel work including doors, gates,angle post but excluding framed truss etc complete all as specified and directed. |
| 23 | S & F MS framed work Fe-410W, (Grd-E-250, Qlty \"A\"), as in doors or gate of angle or other section with gusset plates rails braces etc complete drilled for fixing of steel sheeting or other coveringdoor etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing complete all as specified and directed. |
| 24 | S & F 1mm sheetMild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, includingscrew clout nails riveted & weldingbending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 25 | S & F MSFramed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 26 | Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 27 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 28 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 29 | M&L applying two coats of synthetic enameled paint overa coat of red oxide zinc chromeprimer on new steel surfaces over 10 cm width or girth including preparation of new surfaces all as specified and directed. |
| 30 | All as per item No. 29 here-in-before but n.exc 10 cm with or girth |
| 31 | Removal of demolished/debris material with alead of upto 500 m complete all as specified and directed. |
