Tender For Purchasing Safety Equipments For Maintaining Ugd Under Tcc Limits-Karnataka

Purchasing Safety Equipments For Maintaining Ugd Under Tcc Limits Purchasing Safety Equipments For Maintaining Ugd Under Tcc Limits , Supplying And Commissioning Metal Detector Conformity Conformity To Technical Requirements As Per Qr / Specification And Tds For Deep Search Mine / Metal Detector, Prepared By Directorate General National Security Guard ( Provisioning Branch / Ord Section ) , Mehram Nagar, Palam, New Delhi-110037 And Approved By Mha As Per Letter No Iv-P / 604 / 17 / ( 389 ) Dsmd / Nsg / 1359 Dated On 25 / 02 / 2018. Availability Of Qr / Specification For Deep Search Mine / Metal Detector Yes Qr / Specification Has Been Seen, Read And Understood Yes Scope Of Supply Of Deep Search Mine / Metal Detector Covers All Components Complete As Per Governing Qr / Specification Yes Advance Sample / Field Trial Demo Offered At Consignees Place Yes, Agree To Provide Advance Sample ( S ) For Buyers Approval / Field Trial Before Commencement Of Supply Yes Number Of Days Required To Provide Advance Sample To The Buyer ( From The Date Of Placement Of Order ) Yes Warranty Warranty 2 Year Minimum Period For Which Manufacturer Undertakes To Provide Spares 10 Year Test Report Availability Of Test Reports From Central Govt / Nabl Approved / Ilac Accredited Lab To Prove Conformity To The Mha Qr / Specification Yes If Yes, Test Report To Be Furnished To The Buyer On Demand Yes Test Report No And Date Ctr / 201901192 Name Of The Lab And Address Sspi&Rc. Inclusive Gst, Transportation Charges And Other All Charges., Supplying And Commissioning Bosch Power Tools ( Bosch Gsh 27 Vc ) Standards Certifications And Standards Epto / Equivalent International Standards Performance Parameters Weight Of Chipping Hammer In Kgs 29.5 The Chipping Hammer To Be Supplied With Adjustable Bits Yes Power Requirements 230 V 50 Hz, Single Phase Power Rating In Watt 2000 Chiseling Impact Rate In Bpm 1000 Chiseling Impact Force In Joules 69 Noise Level At 1 M Distance When Working In Db 100, Material Of Bit Supplied High Tensile Steel Bit Diameter Should Match With Size Of Bit Locker Of Equipment Yes Protective Carry Case To Be Supplied Which Is Designed So That Same Fully Protect The Equipment Getting Damaged And For Easy Handling Of Equipment During Transit Yes Material Of The Protective Carry Case Hard Durable Plastic Warranty In Years 1 Additional Parameters The Equipement Shall Be Light In Weight And Shock Proof Body Yes Electric Cord Not Less Than 4 M In Length 10 / 15 Amp 3 Pin Which Can Be Converted To Pin Also To Be Provided Yes Dust Seal To Protect Equipement From Entering Of Dust Inside Yes Easy To Easy To Operate Suitable On / Off Switch Yes Availability Of Active Vibration Absorbing System Yes All Safety Noms As Per National / International Systems To Be Available Yes, One Flat Bit And One Pointed Bit To Be Supplied With Machine Yes Number Of Pairs Of Spare ( Extra ) Pointed Bits To Be Supplied With Machine 1 The Bit Length Pair Of Pointed Bits Supplied As Spare ( Extra ) Should Be Such That Length Of The One Bit Should Be More Than 28 Cm And Other Should Be More Than 41 Cm Yes Number Of Pairs Of Spare ( Extra ) Flat Bits To Be Supplied With Machine 1 The Bit Length Pair Of Flat Bit Supplied As Spare ( Extra ) Should Be Such That Length Of The One Bit Should Be More Tham 28 Cm And Other Should Be More Than 41 Cm Yes Grease Of 100 Gm In Suitable Packed Container To Be Supplied With Machine Yes One Set Of Dust Cap And Ear Plug To Be Supplied For The Use Of Operator Yes Product Instruction Manual Shall Be Supplied With The Machine Yes Demonstration Of Equipment And Training To Be Provided After Completing Supplies Before Acceptance Yes, Certificates Availibility Of Test Report From Central Govt / Nabl / Ilac Accredited Lab Covering All Parameters Yes Copies Of Test Reports / Certificates And Other Certifications To Be Furnished To Buyer On Demand At Time Of Supplies Yes. Inclusive Gst, Transportation Charges And Other All Charges., Supplying And Commissioning Dewatering Pump 5 Horsepower, Constructional Make Of Pump Jk Casing Granded Cast Iron Impeller Cast Iron Of Grade Fg200 Of Is210 Casing And Impeller Wearing Ring If Provided Otherwise Put Na Na Shaft Type Chrome Steel Gland Packing Type Non Asbestors Blade Material Stainless Steel Sleeve Brass Bracket Others Suction Flange Others Net Positive Suction Head ( Npsh ) 16 Meter, Gland Packing Set Brass One Number Suitable Size Suction Strainer And Non Return Value To Be Supplied With Each Pump Yes Number Of Stages 1 Dimension Of Pump Set ( L X B X H ) ( Mm ) 420X459x626 Weight Of Pump Set 155 Kilogram Minimum Submerge 12 Meter Delivery Flange Granded Cast Iron Material Of Trolley Ms Fabricated Suction And Delivery Pipe Dimensions ( Mm X Mm ) ( Mm X Mm ) 87.5X80 The Engine Shall Be Vertical, Inline, Diesel Engine Capable Of Continuous Operation And Must Be Equipped With 12 Volt Starter And Alternator, Control Panel, Wiring Harness For Panel Fuel Pipes And Suitable Battery Yes 12 V Starting System Complete With Starter Motor, Charging Alternator And Cutout Yes Engine Make Jk Number Of Cylinder 1 Engine Capacity 5 Horsepower Power Input To Pump At Duty Point ( Kilowatt ) 3 Kilowatt , Diesel Engine Be Closed Coupled And Mounted On A Base Plate Robust Yes Material Of Base Plate On Which Engine Is Mounted Mild Steel Make Of Engine Control Panel Others Engine Control Panel With Following Items I Engine Start Switch Ii Engine Oil Pressure Meter Iii Engine Temperature Meter Iv Ampere Meter V Emergency Engine Stop Switch Engine Oil Pressure Meter Vi Engine Hour Meter Vii Fuel Indication Meter Viii Rpm Meter Yes Safety Controls To Shutdown The Engine In The Event Of Low Lub Oil Pressure Or High Cylinder Head Temperature In Case Of Air Cooled Engines Yes Exhaust Silencer Of Residential Type Application Yes Rotation: Clock Wise While Facing The Flywheel End Yes Fuel Tank Capacity For Min 24 Hours Continous Running At Full Load 30 Liter Temperature Rise 40 Degree Celsius, Standard Set Of Tools Consisting Of Set Of 3 Spanners , One Screw Driver , One Standard Plier And One Nose Plier Of Appropriate Engine Size Shall Be Provided To The Consignee Along With , Free Of Cost For Each Of Pump Set Yes Supply Of Auto Prime, Horizontal, End Suction, Centrifugal Type Pumping Unit Capable Handling Floating Material / Soft Solids Like Wooden Pieces , Muddy Water, Etc Yes Generic Dewatering Pump Set Dewatering Pumps Or Engine Monoset Pumps Generally Incompliance To Is 11501 : 1986 ( Reaffirmed 2016 ) Complete Unit Including Pump & Engine Duly Coupled Along With Auto Prime System, Fuel Tank Etc Shall Be Mounted On A Two Wheeled Trolley For Easy Transportability, The Trolley Shall Be Equipped With Leaf Springs For Suspension, Support For Rear End And Towing Bar, Parking Breaks Etc And The Trolley Must Have Minimum Ground Clearance Of 300 Mm, Below Leaf Spring Type Of Pump Back Pull Out Model Number Of Pump Jk-Dw-8722 Service / Duty Continuous Location Outdoor Fuel Supply Fuel Pump By Gravity Feed Through Tank Starting Hand Start, Performan- Capacity ( Rate Of Flow ) ( MⳠ/ Hr ) 50 Total Head ( Min ) Corrsponding To Capacity And Speed ( Metres ) 10 Meter Speed In Rpm ( Rpm ) 1500 Pump Efficiency At Duty Point Corrsponding To Capacity And Speed ( Water Delivered / Pump Input ) ( % ) 60 Lub Oil Consumption ( G / K Wh ) : ( G / K Wh ) 1 All Rotating Parts Be Dynamically Balanced For Longer Bearing Life And Vibration Free Smooth And Silent Operation Yes The Pump Shall Be Capable Of Developing Required Head At Rated Capacity For Continuous Outdoor Operation External Conditions Like Rain, Snow And Humidity Should Not Affect Pumping Operation Yes The Shut Off Head Of The Pump Shall Not Less Than 12% Of Head At Rated Capacity For 3 Cusec And 5 Cusec Pumps Having 10 Mtrs As Duly Point Head Yes The Pump Should Be Capable Of Starting Without External Priming And Should Be Capable Of Operation With Least Human Intervention Yes , The Pump Must Have Non-Overloading Characteristics And The Prime Mover Ie Engine Shall Not Get Overloaded In The Entire Range Of Operation Yes Certification Isi Marked No Cm / L No And Date Na Availability Of Type Test Report For Conformity Is As Per Is:10, 001Latest / Is 11170Latest / Is:7347Latest Forengines, To Is:11501 Latest And Is:9137 Latest For Pumps And Other Parameters To Specification From Any Ilac / Nabl Accredited / Central Govt Lab Yes Test Cetificate No And Date 128-11 / 2 / 2020 Name And Address Of The Lab Gujarat Metal-Rajkot Test Report And Certifications To Be Furnished To The Buyer On Demand Yes Warranty ( Years ) 1. Inclusive Gst, Transportation Charges And Other All Charges., Supplying And Commissioning Safety Square Iron Collapsible Road Barricade, Material , Design Material Iron Material Of Collapsible Flate Strip Iron Side Structure Of Pipe Square Wheels Yes No Of Wheels 4 Item Item Collapsible Road Barricade Colour Colour Yellow , Overall Height At Close ( In Mm ) 1000 Overall Height At Open ( In Mm ) 900 Length After Opening ( In Mm ) 2500 Length After Collapse ( In Mm ) 450 Diamension Of Side Structure Of Pipe ( In Mm ) 50 X 50 Square Thickness Of Side Structure Of Pipe ( In Mm ) 1.5 Thickness Of Movable Flate Strip ( In Mm ) 4 Length Of Movable Flate Strip ( In Mm ) 800 Width Of Movable Flate Strip ( In Mm ) 30 Diameter Of Wheel 50 Finish Coating Galvanized Metal. Inclusive Gst, Transportation Charges And Other All Charges., Supplying And Commissioning Handheld Walkie Talkie Conformity Conformity To Technical Requirements As Per Qr / Specification & Tds For Digital Handheld Vhf Transceiver Set, Prepared By Police Modernization Division, 26, Mansingh Road, Jaisalmer House, New Delhi And Approved By Mha As Per Letter No. B.V-7 / 2012-13 ( Qrs ) Dated 02Nd October, 2014 ( Copy Of Qrs / Tds Uploaded In Gem Portal ) Availability Of Qr / Specification For Digital Handheld Transceiver Set Yes Qr / Specification Has Been Seen, Read And Understood Yes, Scope Of Supply Of Digital Handheld Transceiver Set Covers All Components Complete As Per Governing Qr / Specification Yes General Frequency Range Vhf:136 -174 Mhz Type Of Band Full Band No Of Channel 255 Or Higher Protocol And Technology Tdma ( 2-Slot ) Channel Spacing 12.5 Khz Or Better Frequency Stability ( +Or - ) 1.5 Ppm Or Better Type Of Emission ( Modulation ) Analog ( 11K0f3e ) Type Of Operation Press To Talk Type Of Antenna Rugged Flexible Helical Antenna Protection ( 1 ) Reverse Polarity Protection ( 2 ) Protection Against High Vswr Weight Less Than 450 Gram With Battery Other Parameter Air Interface Standard ( Open Standard Dmr Tier - Ii ) Transmitter / Receiver, Transmitter Rf Power Output ( Vhf : 1 / 5 Watts ( Programmable / Selectable ) , Uhf: 1 / 4 Watts ( Programmable / Selectable ) , Fm Emission ( 11K0f3e ) , Fm Emission ( 7K60fxe ) , Fm Emission ( 7K60fxw ) , Modulation Limiting ( +2.5 Khz At 12.5 Khz ) , Digital Modulation ( 4Fsk ) , Fm Emission ( 7K60fxd ) , Fm Hum & Noise ( -40Db ) , Adjacent Channel Power ( -60 Dbc ) Receiver Sensitivity ( Analog ) : 0.30 μv For 12Db Sinad Or Better, Sensitivity ( Digital ) : 0.30 μv At 5% Ber Or Better, Adjacent Channel Selectivity ( 60 Db Or Batter ) , Inter Modulation ( 60 Db Or Batter ) , Inter Modulation ( 70 Db Or Batter ) , Audio Output ( Minimum 500 Mw ) , Audio Response ( +1, -3 Db ) , Audio Distortion ( Less Than 3% ) Power Source / Battery Battery Capacity 2000 Mah Or More With Belt Clip Type Of Battery Supplied With Digital Handheld Vhf Transceiver Set ( Battery Chemistry ) Li-Ion Dc Voltage 7.4 Volt Valid Bis Certification For Battery To Is: 16046 ( Latest ) Under Compulsory Registration Scheme ( Crs ) Yes Communication Security / Optional Features Communication Security Na Encryption Aes 128 / 256 Bit Encryption + Thirdparty Encryption Buyer Specific Requirements, Whether The Offered Product / Model Has Been Successful During Field Trial Conducted Through Eoi Tender By Cpmf Organisation No ( Not Participated In Any Eoi Tender ) If Yes, Provide The Cpmf Organisation Name And Eoi Number With Date Na Accessories ( Hint :-Repair Manual And Prog Kit, Qty Required By Buyer May Be Specified Through Atc In The Bid For Procurement Of Sets More Than One If Considered Appropriate, As These Are Not Required One With Every Radio ) Literature - User Manual With Each Radio Sets Provided Free Of Cost In Soft As Well As Hard Copy, Literature - Technical Repairing & Maintenance Manual With Complete Block Diagram, Programming Kit ( All Necessary Programming Software And Hardware Required For The Set Shall Be Provided ) , Spare Batteries-1No Supplied With Each Radio Set ( In Addition To The Battery Supplied With The Equipment ) , Single Unit Smart Charger Additional Accessories ( Hint :-Repair Manual And Prog Kit, Qty Required By Buyer May Be Specified Through Atc In The Bid For Procurement Of Sets More Than One If Considered Appropriate, As These Are Not Required One With Every Radio ) . Inclusive Gst, Transportation Charges And Other All Charges., Jetting Hose Pipe, Guddali & Kaavu, Salike And Kaavu, Haare ( 1 Inch ) , Plastic Tub ( Pamela )

INR 500 /-

INR 25000.0 /-

INR 9.92 Lakhs /-

Sl. No.	Item Name
1	Supplying and commissioning Metal Detector CONFORMITY Conformity to technical requirements As Per QR/Specification and TDs for "Deep Search Mine/Metal Detector", Prepared by Directorate General National Security Guard (Provisioning Branch/Ord Section), Mehram Nagar, Palam, New Delhi-110037 and approved by MHA as per letter No IV-P/604/17/(389)DSMD/NSG/1359 Dated on 25/02/2018. Availability of QR/specification for Deep Search Mine/Metal Detector Yes QR/specification has been seen, read and understood Yes Scope of supply of Deep Search Mine/Metal Detector covers all components complete as per governing QR/specification Yes ADVANCE SAMPLE / FIELD TRIAL Demo offered at consignees place Yes,Agree to provide Advance Sample(s) for buyers approval / Field Trial before commencement of supply Yes Number of days required to provide Advance Sample to the buyer (from the date of placement of order) Yes WARRANTY Warranty 2 year Minimum Period for which manufacturer Undertakes to Provide Spares 10 year TEST REPORT Availability of Test Reports from Central Govt / NABL approved / ILAC accredited Lab to prove conformity to the MHA QR/specification Yes If Yes, Test Report to be furnished to the Buyer on demand Yes Test Report No and Date CTR/201901192 Name of the Lab and Address SSPI&RC. Inclusive GST, Transportation charges and Other all charges.
2	Supplying and commissioning Bosch power tools (BOSCH GSH 27 VC) Standards Certifications and Standards EPTO/ Equivalent international standards Performance Parameters Weight of Chipping hammer in kgs 29.5 The chipping hammer to be supplied with adjustable bits Yes Power Requirements 230 V 50 Hz, Single phase Power Rating in Watt 2000 Chiseling impact rate in bpm 1000 Chiseling impact force in Joules 69 Noise level at 1 m distance when working in dB 100, Material of bit supplied High Tensile Steel Bit Diameter should match with size of bit locker of equipment Yes Protective carry case to be supplied which is designed so that same fully protect the equipment getting damaged and for easy handling of equipment during transit Yes Material of the protective carry case Hard durable plastic Warranty in Years 1 Additional Parameters The equipement shall be light in weight and shock proof body YES Electric cord not less than 4 m in length 10/15 Amp 3 pin which can be converted to pin also to be provided Yes Dust seal to protect Equipement from entering of dust inside Yes Easy to Easy to operate suitable on/off Switch Yes Availability of active vibration absorbing system Yes All safety noms as per National / International systems to be available Yes, One flat bit and one pointed bit to be supplied with machine Yes Number of pairs of spare(extra) pointed bits to be supplied with Machine 1 The bit length pair of pointed bits supplied as spare (extra) should be such that length of the one bit should be more than 28 cm and other should be more than 41 cm Yes Number of pairs of spare (extra) flat bits to be supplied with Machine 1 The bit length pair of flat bit supplied as spare (extra) should be such that length of the one bit should be more tham 28 cm and other should be more than 41 cm Yes Grease of 100 gm in suitable packed container to be supplied with machine Yes One set of Dust Cap and ear plug to be supplied for the use of operator Yes Product instruction manual shall be supplied with the machine Yes Demonstration of equipment and training to be provided after completing supplies before Acceptance Yes, Certificates Availibility of test report from central Govt/ NABL/ILAC accredited lab covering all parameters Yes Copies of test Reports/certificates and other certifications to be furnished to buyer on demand at time of supplies Yes. Inclusive GST, Transportation charges and Other all charges.
3	Supplying and commissioning Dewatering Pump 5 horsepower, CONSTRUCTIONAL Make of Pump JK Casing Granded Cast Iron Impeller Cast Iron of Grade FG200 of IS210 Casing and Impeller Wearing Ring If provided otherwise put NA NA Shaft Type Chrome Steel Gland Packing Type Non Asbestors Blade Material Stainless Steel Sleeve Brass Bracket Others Suction Flange Others Net Positive Suction Head (NPSH) 16 meter, Gland Packing set Brass One number suitable size suction strainer and Non Return Value to be supplied with each pump Yes Number of Stages 1 Dimension of Pump Set ( L x B x H )(mm) 420X459X626 Weight of Pump Set 155 kilogram Minimum Submerge 12 meter Delivery Flange Granded Cast Iron Material of Trolley MS fabricated Suction and Delivery Pipe Dimensions ( mm x mm) (mm x mm) 87.5X80 The engine shall be Vertical, inline, diesel engine capable of continuous operation and must be equipped with 12 volt starter and alternator, control panel, wiring harness for panel fuel pipes and suitable battery Yes 12 V starting system complete with starter motor, charging alternator and Cutout Yes Engine Make JK Number of Cylinder 1 Engine Capacity 5 horsepower Power input to pump at Duty Point (Kilowatt) 3 kiloWatt , Diesel engine be closed coupled and mounted on a base plate robust Yes Material of Base Plate on which Engine is Mounted Mild Steel Make of Engine Control panel Others Engine Control Panel with Following Items i Engine START switch ii Engine oil Pressure meter iii Engine Temperature meter iv Ampere Meter v Emergency Engine Stop Switch Engine oil Pressure meter Vi Engine Hour Meter Vii Fuel Indication meter Viii RPM Meter Yes Safety controls to shutdown the engine in the event of low lub oil pressure or high cylinder head temperature in case of air cooled engines Yes Exhaust silencer of Residential type application Yes Rotation: clock wise while facing the flywheel end Yes Fuel Tank Capacity for min 24 hours continous running at full load 30 liter Temperature Rise 40 degree Celsius, Standard set of tools consisting of set of 3 spanners ,one screw driver ,one standard plier and one nose plier of appropriate engine size shall be provided to the consignee along with , free of cost for each of Pump Set yes Supply of Auto prime, horizontal, end suction, centrifugal type pumping unit capable handling floating material/soft solids like wooden pieces , muddy water, etc yes GENERIC Dewatering Pump set DEWATERING PUMPS Or ENGINE MONOSET PUMPS generally incompliance to IS 11501 : 1986 (REAFFIRMED 2016) Complete unit including pump & engine duly coupled along with auto prime system, fuel tank etc shall be mounted on a two wheeled trolley for easy transportability,The trolley shall be equipped with Leaf Springs for Suspension, Support for Rear end and Towing Bar, Parking Breaks etc and The trolley must have minimum ground clearance of 300 mm, below leaf spring Type of pump Back Pull Out Model Number of Pump JK-DW-8722 Service/Duty Continuous Location Outdoor Fuel supply Fuel Pump by Gravity Feed through Tank Starting Hand Start, PERFORMAN- Capacity (Rate of Flow) ( m³/hr) 50 Total Head (min) Corrsponding to Capacity and Speed (metres) 10 meter Speed in RPM (rpm) 1500 Pump Efficiency at Duty point Corrsponding to Capacity and Speed ( water delivered / Pump Input ) (%) 60 Lub Oil Consumption (g/k Wh) : (g/k Wh) 1 All rotating parts be dynamically balanced for longer bearing life and vibration free smooth and silent operation yes The pump shall be capable of developing required head at rated capacity for continuous outdoor operation External conditions like Rain, Snow and humidity should not affect pumping operation yes The shut off head of the pump shall not less than 12% of head at rated capacity for 3 cusec and 5 cusec pumps having 10 mtrs As duly point head yes The pump should be capable of starting without external priming and should be capable of operation with least human intervention yes , The pump must have non-overloading characteristics and the prime mover ie engine shall not get overloaded in the entire range of operation yes CERTIFICATION ISI marked No CM/L No and date NA Availability of Type Test Report for conformity IS as per IS:10,001latest/IS 11170latest/IS:7347latest forEngines,to IS:11501 latest and IS:9137 latest for pumps and other parameters to specification from any ILAC/NABL accredited/Central Govt LAB yes Test cetificate No and Date 128-11/2/2020 Name and address of the Lab GUJARAT METAL-RAJKOT Test report and certifications to be furnished to the buyer on demand yes Warranty (Years) 1. Inclusive GST, Transportation charges and Other all charges.
4	Supplying and commissioning SAFETY Square Iron Collapsible Road Barricade, MATERIAL ,DESIGN Material Iron Material of Collapsible Flate Strip Iron Side Structure of Pipe Square Wheels Yes No of wheels 4 ITEM ITEM COLLAPSIBLE ROAD BARRICADE Colour COLOUR Yellow , Overall Height at Close ( In MM ) 1000 Overall Height at Open ( In MM ) 900 Length after opening ( In MM ) 2500 Length after collapse ( In MM ) 450 Diamension Of side structure of pipe ( In MM ) 50 x 50 square Thickness of side structure of pipe ( In MM ) 1.5 Thickness of Movable flate strip(in mm) 4 Length of Movable flate strip(in mm) 800 Width of Movable flate strip(in mm) 30 Diameter of wheel 50 FINISH Coating Galvanized metal. Inclusive GST, Transportation charges and Other all charges.
5	Supplying and commissioning Handheld Walkie Talkie CONFORMITY Conformity to technical requirements As per QR/specification & TDs for Digital Handheld VHF Transceiver Set, prepared by Police Modernization Division, 26, Mansingh Road, Jaisalmer House, New Delhi and approved by MHA as per letter No. B.V-7/2012-13 (QRs) Dated 02nd October, 2014 (Copy of QRs / TDs uploaded in GeM portal) Availability of QR/specification for Digital Handheld Transceiver Set Yes QR/specification has been seen, read and understood Yes, Scope of supply of Digital Handheld Transceiver Set covers all components complete as per governing QR/specification Yes General Frequency Range VHF:136 -174 MHz Type of Band Full Band No of Channel 255 or higher Protocol and Technology TDMA (2-SLOT) Channel spacing 12.5 KHz or better Frequency Stability (+or -) 1.5 PPM or better Type of Emission (Modulation) Analog (11K0F3E) Type of Operation Press to Talk Type of Antenna Rugged flexible Helical antenna Protection (1) Reverse polarity protection (2) Protection against high VSWR Weight Less than 450 gram with battery Other parameter Air Interface Standard ( open standard DMR Tier - II) Transmitter/Receiver, Transmitter RF power output (VHF : 1 / 5 watts (Programmable/selectable ),UHF: 1 / 4 watts (Programmable/ selectable ),FM Emission (11K0F3E),FM Emission (7K60FXE),FM Emission (7K60FXW),Modulation Limiting(+2.5 KHz at 12.5 KHz),Digital Modulation(4FSK),FM Emission (7K60FXD),FM HUM & Noise(-40dB),Adjacent Channel power(-60 dBc) Receiver Sensitivity(Analog) : 0.30 μV for 12dB SINAD or better,Sensitivity(Digital) : 0.30 μV at 5% BER or better,Adjacent Channel selectivity (60 dB or batter ),Inter modulation(60 dB or batter ),Inter modulation(70 dB or batter ),Audio Output ( minimum 500 mW),Audio Response ( +1, -3 dB),Audio Distortion(Less than 3%) POWER SOURCE / BATTERY Battery Capacity 2000 mAH or More with Belt Clip Type of Battery supplied with Digital Handheld VHF Transceiver Set (Battery Chemistry) Li-ion DC Voltage 7.4 Volt Valid BIS certification for Battery to IS: 16046 (latest) under Compulsory Registration Scheme (CRS) Yes COMMUNICATION SECURITY / OPTIONAL FEATURES Communication Security NA Encryption AES 128/256 bit encryption + Thirdparty Encryption Buyer Specific REQUIREMENTS, Whether the offered product/ model has been successful during field trial conducted through EOI tender by CPMF organisation No ( NOT PARTICIPATED IN ANY EOI TENDER) If Yes, Provide the CPMF Organisation name and EOI Number with date NA Accessories ( hint :-Repair Manual and Prog Kit, Qty required by buyer may be specified through ATC in the bid for procurement of sets more than one if considered appropriate, as these are not required one with every radio) Literature - User Manual with each radio sets provided free of cost in soft as well as hard copy,Literature - Technical repairing & maintenance manual with complete block diagram,Programming Kit( All Necessary Programming Software and Hardware required for the set shall be provided),Spare Batteries-1No supplied with each radio set (in addition to the battery supplied with the equipment),Single Unit Smart Charger Additional Accessories ( hint :-Repair Manual and Prog Kit, Qty required by buyer may be specified through ATC in the bid for procurement of sets more than one if considered appropriate, as these are not required one with every radio). Inclusive GST, Transportation charges and Other all charges.
6	Jetting hose pipe
7	guddali & kaavu
8	salike and kaavu
9	haare (1 inch)
10	Plastic tub(pamela)