Tender For 06 Flats At Amd Er Jamshedpur, Singhbhum-Jharkhand

Bids Are Invited For 1 Item 1 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engineer - In- Charge. 2 Item 2 Dismantling Old Plaster Or Skirting Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 50 Metres Lead. 3 Item 3 Disposal Of Building Rubbish / Malba / Similar Unserviceable, Dismantled Or Waste Materials By Mechanical Means, Including Loading, Transporting, Unloading To Approved Municipal Dumping Ground Or As Approved By Engineer-In-Charge, Beyond 50 M Initial Lead, For All Leads Including All Lifts Involved . 4 Item 4 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs Having Slope Up To 15° Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Above Plinth Level Up To Floor Five Level, Excluding The Cost Ofcentering, Shuttering, Finishing And Reinforcement With 1 Isto1.5 Isto 3 ( 1 Cementisto 1.5 Coarse Sand ( Zone-Iii ) Isto3 Graded Stone Aggregate 20 Mm Nominal Size ) Derived From Natural Sources 5 Item 5 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights- Suspended Floors, Roofs, Landings, Balconies And Access Platform 6 Item 6 Steel Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Above Plinth Level- Thermo-Mechanically Treated Bars Of Grade Fe-500D Or More. 7 Item 7 12 Mm Cement Plaster Of Mix1 Isto 4 ( 1 Cement Isto 4 Fine Sand ) 8 Item 8 Providing And Fixing Ist Quality Ceramic Glazed Digital Wall Tiles Conforming To Is-15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1 Isto 3 ( 1 Cement 3 Isto Coarse Sand ) And Jointing With Grey Cement Slurry At The Rate Of 3.3Kg Per Sqm, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 9 Item 9 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished , Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1 Isto 4 ( 1 Cement Isto 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels -Granite Stone Slab Colour Black, Cherry / Ruby Red- Area Of Slab Over 0.50 Sqm 10 Item 10 Extra For Fixing Marble / Granite Stone, Over And Above Corresponding Basic Item, In Facia And Drops Of Width Upto 150 Mm With Epoxy Resin Based Adhesive, Including Cleaning Etc. Complete. 11 Item 11 Extra For Providing Opening Of Required Size & Shape For Wash Basin / Kitchen Sink In Kitchen Platform, Vanity Counter And Similar Location In Marble / Granite / Stone Work, Including Necessary Holes For Pillar Taps Etc. Including Moulding, Rubbing And Polishing Of Cut Edges Etc. Complete. 12 Item 12 Fixing Charges Of Stainless Steel Kitchen Sink ( 610X460 Mm Bowl Depth 200 Mm ) Without Drain Boardincluding Cutting And Making Good The Walls Wherever Required As Per Direction Of Engineer In Charge. 13 Item 13 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete -Flexible Pipe - 32 Mm Dia 14 Item 14 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot & Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipe With Clamps At 1.00 M Spacing. This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And The Cost Of Cutting Chases And Making Good The Same Including Testing Of Joints Complete As Per Direction Of Engineer In Charge - Concealed Work, Including Cutting Chases And Making Good The Walls Etc. - 20 Mm Nominal Outer Dia Pipes 15 Item 15 Removing Dry Or Oil Bound Distemper, Water Proofing Cement Paint And The Like By Scrapping, Sand Papering And Preparing The Surface Smooth Including Necessary Repairs To Scratches Etc. Complete. 16 Item 16 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete. 17 Item 17 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface -Water Thinnable Cement Primer 18 Item 18 Distempering With 1St Quality Acrylic Distember ( Ready Mix ) Having Voc Content Less Than 50 Grams / Litre Of Approved Brand And Manufacture To Give An Even Shade - Old Work ( One Or More Coats ) 19 Item 19 Fixing Charges Of Sink Cock With All Necessary Fittings Including Cost Of Labour Complete As Per Specification As Per Direction Of Engineer-In-Charge - 15 Mm Nominal Bore 20 Item 20 Providing And Fixing On Wall Face Unplasticised Rigid Pvc Swr Pipes Conforming To Is - 13592 Type A, Including Jointing With Seal Ring Conforming To Is - 5382, Leaving 10 Mm Gap For Thermal Expansion, ( I ) Single Socketed Pipes -75 Mm Diameter 21 Item 21 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories ( Conforming To Is - 14735 ) For Unplasticised Rigid Pvc Swr Pipes Conforming To Is -13592 Type A, Including Jointing With Seal Ring Conforming To Is -5382, Leaving 10 Mm Gap For Thermal Expansion - Bend 87.5° - 75 Mm Bend 22 Item 22 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories ( Conforming To Is - 14735 ) For Unplasticised Rigid Pvc Swr Pipes Conforming To Is -13592 Type A, Including Jointing With Seal Ring Conforming To Is - 5382, Leaving 10 Mm Gap For Thermal Expansion - Door Bend 87.5° - 75 Mm Bend 23 Item 23 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories ( Conforming To Is - 14735 ) For Unplasticised Rigid Pvc Swr Pipes Conforming To Is -13592 Type A, Including Jointing With Seal Ring Conforming To Is - 5382, Leaving 10 Mm Gap For Thermal Expansion-Single Tee With Door - 75 Mm X 75 Mm X 75 Mm 24 Item 24 Providing And Fixing Unplasticised -Pvc Pipe Clips Of Approved Design To 75 Mm Unplasticised - Pvc Swr Pipes By Means Of Nylonplugs, Screwed With Ss Screws Of Required Length, Including Cutting Brick Work And Fixing In Cement Mortar 1 Isto 4 ( 1 Cement Isto 4 Coarse Sand ) And Making Good The Wall Etc. Complete. 25 Item 25 Providing And Fixing On Wall Face Unplasticised - Pvc Moulded Fittings / Accessories ( Conforming To Is - 14735 ) For Unplasticised Rigid Pvc Swr Pipes Conforming To Is - 13592 Type A, Including Jointing With Seal Ring Conforming To Is - 5382, Leaving 10 Mm Gap For Thermal Expansion - Nahani Trap - 110 X 75 Mm 26 Item 26 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is-733 And Is- 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P.Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) - For Fixed Portion - Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 27 Item 27 Providing And Fixing Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is- 733 And Is- 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P.Brass / Stainless Steel Screws, All Complete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. ( Glazing, Paneling And Dash Fasteners To Be Paid For Separately ) -For Shutters Of Doors, Windows & Ventilators Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Epdm Rubber / Neoprene Gasket Required ( Fittings Shall Be Paid For Separately ) -Powder Coated Aluminium ( Minimum Thickness Of Powder Coating 50 Micron ) 28 Item 28 Providing And Fixing 3 Mm Thick Aluminium Compositive Panel ( Acp ) Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Of Engineer In-Charge. 29 Item 29 Providing And Fixing Aluminium Handles, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is - 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete - 75 Mm 30 Item 30 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is - 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete - 100X10 Mm

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	03-Oct-2022			11-10-2022
2	11-Oct-2022			17-10-2022

Refer document

INR 10050.0 /-

INR 5.02 Lakhs /-

Sl. No.	Item Title	Item Description
1	Item 1	Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
2	Item 2	Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
3	Item 3	Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved .
4	Item 4	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost ofcentering,shuttering, finishing and reinforcement with 1 isto1.5 isto 3 (1 cementisto 1.5 coarse sand (zone-III) isto3 graded stone aggregate 20 mm nominal size) derived from natural sources
5	Item 5	Centering and shuttering including strutting, propping etc. and removal of form for all heights- Suspended floors, roofs, landings, balconies and access platform
6	Item 6	Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete above plinth level- Thermo-Mechanically Treated bars of grade Fe-500D or more.
7	Item 7	12 mm cement plaster of mix1 isto 4 (1 cement isto 4 fine sand)
8	Item 8	Providing and fixing Ist quality ceramic glazed digital wall tiles conforming to IS-15622 (thickness to be specified by the manufacturer), of approved make, in all colours,shades except burgundy, bottle green, black of any size as approved by Engineer in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1 isto 3 (1 cement 3 isto coarse sand) and jointing with grey cement slurry at the rate of 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
9	Item 9	Providing and fixing 18 mm thick gang saw cut,mirror polished ,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 isto 4 (1 cement isto 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels -Granite stone slab colour black, Cherry/Ruby red- Area of slab over 0.50 sqm
10	Item 10	Extra for fixing marble /granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.
11	Item 11	Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
12	Item 12	Fixing Charges of Stainless Steel kitchen sink (610x460 mm bowl depth 200 mm)without drain boardincluding cutting and making good the walls wherever required as per direction of Engineer in Charge.
13	Item 13	Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete -Flexible pipe - 32 mm dia
14	Item 14	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge - Concealed work, including cutting chases and making good the walls etc. - 20 mm nominal outer dia Pipes
15	Item 15	Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
16	Item 16	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
17	Item 17	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface -Water thinnable cement primer
18	Item 18	Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade - Old work (one or more coats)
19	Item 19	Fixing charges of Sink Cock with all necessary fittings including cost of labour complete as per specification as per direction of Engineer-in-charge - 15 mm nominal bore
20	Item 20	Providing and fixing on wall face unplasticised Rigid PVC SWR pipes conforming to IS - 13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes -75 mm diameter
21	Item 21	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories (conforming to IS - 14735) for unplasticised Rigid PVC SWR pipes conforming to IS -13592 Type A, including jointing with seal ring conforming to IS -5382, leaving 10 mm gap for thermal expansion - Bend 87.5° - 75 mm bend
22	Item 22	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories (conforming to IS - 14735) for unplasticised Rigid PVC SWR pipes conforming to IS -13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal expansion - Door Bend 87.5° - 75 mm bend
23	Item 23	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories (conforming to IS - 14735) for unplasticised Rigid PVC SWR pipes conforming to IS -13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal expansion-Single Tee with Door - 75 mm x 75 mm x 75 mm
24	Item 24	Providing and fixing unplasticised -PVC pipe clips of approved design to 75 mm unplasticised - PVC SWR pipes by means of nylonplugs, screwed with SS screws of required length, including cutting brick work and fixing in cement mortar 1 isto 4 (1 cement isto 4 coarse sand) and making good the wall etc. complete.
25	Item 25	Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories (conforming to IS - 14735 ) for unplasticised Rigid PVC SWR pipes conforming to IS - 13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal expansion - Nahani Trap - 110 x 75 mm
26	Item 26	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS-733 and IS- 1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) - For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)
27	Item 27	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS- 733 and IS- 1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) -For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) -Powder coated aluminium (minimum thickness of powder coating 50 micron)
28	Item 28	Providing and fixing 3 mm thick aluminium compositive panel (ACP)fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer in-charge.
29	Item 29	Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS - 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete - 75 mm
30	Item 30	Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS - 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete - 100x10 mm