Construction Of Segregation Shed Near High School Lalpora
Tender Value
4.93 Lakhs
Estimated cost
Bid Submission
30 Sep 2022
0 days left
EMD
9870
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
beerwah → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
CONSTRUCTION Of Segregation Shed Near High School Lalpora
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 min width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: |
| 2 | Providing and laying of dry stone soling hand packed including carriage 25 kms, all complete job.( including plum 2.48 cum) |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 4 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) |
| 5 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work with common burnt clay bricks/cement concrete bricksin superstructure above plinth level upto floor five level including carriage 20 kms. |
| 6 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns |
| 8 | 12mm Cement plaster of mix 1 : 4 ( 1 cement : 4 coarse sand) |
| 9 | Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 10 | Providing corrugated G. S. sheet roofing including vertical/curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 11 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm |
| 12 | Carraige of sand / aggregateAverage lead of 25 kms by MT. |
| 13 | Carraige of Bricks from source to site average lead of 15 kms by MT. |
| 14 | Carriage of Steel barsfrom source to site average lead of 10 kms by MT. |
| 15 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) |
| 16 | Finishing with Epoxy paint (two or more coats) at all locations preparedand applied as per manufacturer’s specifications including appropriatepriming coat, preparation of surface, etc complete : On steel work |
| 17 | Suppling and fixing of rolling shutters of approved make. Made of required size M.S laths interlocked together through their entire length and jointed at the end by end locksmounted on specially designed pipe shaft with brackets side guide and arrangement for inside and outside locking push and pull operations complete including the cost of providing and fixing neccesary 27.5 cm long wire springs manufactered from high tensil steel wire of adequate strength confirming to IS :4454 part -I and M.S Top cover of required thickness for rolling shutters 80*0.90 mm laths with 0.90 mm thick top cover. |
| 18 | Add Labours for site clearence 2 lab for 2 days. |
| 19 | Add Cost of Signboard/ Photograph etc and others unforeseen items. |
AI Tender Summary
Tender Timeline
Sep 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 30, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 01, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender