Construction Of District Sericulture Complex At Sarnal Anantnag ( District Anantnag )
Tender Value
1.12 Crore
Estimated cost
Bid Submission
03 Oct 2022
0 days left
EMD
2.24 Lakhs
Bank guarantee accepted
Document Fee
2600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
anantnag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of District Sericulture Complex At Sarnal Anantnag ( District Anantnag )
BOQ
| Sl. No. | Item Description |
| 1 | Platform cutting of land for construction of District Sericulture |
| 2 | Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : |
| 3 | Disposal of excavated earth for a lead of 2 Km by M.T |
| 4 | Construction of District Sericulture Office |
| 5 | Earth work in excavation by mechanical means(hydraulic excavator) in trenches for foundations ,drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like notexceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m,including getting out excavated earth and disposal of surplusexcavated earth as directed, within a lead of 50 metres:All kinds of soil : |
| 6 | Providing/Laying stone soling hand packed level on bed of foundation trenches including cost and carriage involved complete job |
| 7 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 8 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All Works upto plinth level 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 9 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 10 | Supply and filling of River Bed Material in layers including watering ramming with hand rammers complete job with all carriages royalty involved. |
| 11 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 12 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure upto floor V level curing in Cement mortar 1:6 ( 1 cement : 6 fine sand) |
| 13 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 14 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level ThermoMechanically Treated bars of grade Fe-500D or m |
| 15 | Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete. |
| 16 | Suspended floors, roofs, landings, balconies and access platforms |
| 17 | Lintel, beams, plinth beams, girders, bressumers and cantilevers |
| 18 | Dry random rubble masonry with hard stone in foundation and plinth: With bond stone |
| 19 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately):Second class kail wood. |
| 20 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class kail wood.35 mm thick. |
| 21 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Second class Kail wood. Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 22 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Second class Kail wood 30 mm thick. |
| 23 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class Kail wood 30 mm thick. |
| 24 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type) |
| 25 | Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved Steel primer all complete. Fixed to openings / wooden frames with rawl plugs screws etc. |
| 26 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 27 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded) |
| 28 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size ,with top and bottom rail of T-iron 40x40x6mm, with 40mm dia, steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer, |
| 29 | Providing and fixing bolts including nuts and washers complete. 20mm dia |
| 30 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered Excluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 31 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate |
| 32 | Flooring with marble stone of specified thickness as per sample of marble approved by Engineer-incharge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement:4 coarse sand) laid and jointed with grey cement slurry including rubbing, polishing and curing complete with: Black zebra |
| 33 | Extra for pre finished nosing to treads of steps of marble stone |
| 34 | Extra for marble stone flooring in treads of steps and risers using single length up to 2.00 meter. |
| 35 | Providing and fixing 1st quality ceramic glazed floor tiles conforming To IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete |
| 36 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 37 | P/F 0.50 mm thick colour coated high rib iron profile sheet roofing of approved profile as approved by the engineer in charge including carriage of same upto site of work. The sheets should have protective guard film of 25 microns to avoid scratches while transportation and should be supplied in single length upto 12 Mtr or as directed by the Engineer in charge. The sheet shall be fixed using self drilling / self tapping screws of size 5.5 x 55 mm with EPDM seal of same colour matching the colour of sheets |
| 38 | Providing and fixing precoated galvanized steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete |
| 39 | Gutter .(600 mm over all width) |
| 40 | 15 mm Cement plaster on the rough side of single or half brick wall of mix 1 : 6 ( 1 cement : 6 fine sand) |
| 41 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 42 | 12mm Cement plaster of mix 1 : 6 ( 1 cement : 6 fine sand) upto floor V level |
| 43 | 12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand) |
| 44 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, inall colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Chargein skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand)and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 45 | Structural steel work welded in single section with or without connecting plate including a coat of red oxide steel primer complete job for soffits and eaves boarding consisting of MS angles and 1mm MS sheet. |
| 46 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade |
| 47 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws,4mm glazing , ACP panelling all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 48 | Providing and fixing M.S. pressed butt hinges bright finished with necessary screws etc. complete (For doors) |
| 49 | Providing and fixing aluminum tower bolts of standard make anodized transparent or dyed to required colour or shade with necessary screws etc. complete :150 mm |
| 50 | Providing and fixing aluminum handles ISI marked anodized transparent or dyed to required colour and shade with necessary screws etc. complete |
| 51 | Providing and fixing of Sliding door bolts of standard quality (Link) with inbuilt locking arrangement complete with fixing by nuts and bolts. (having at least two keys). |
| 52 | P/F aluminium air hooks complete job. |
| 53 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick. |
| 54 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. |
| 55 | P/F of PPR pipes and fittings of standard quality including fittings/ jointing / testing complete B type Pipe 16 mm |
| 56 | Pipe 25 mm |
| 57 | Pipe 32 mm |
| 58 | Union 15 mm |
| 59 | Union 25 mm |
| 60 | Union 32 mm |
| 61 | P/F water heater (geyser) of 50 liter capacity of approved make and quality including all necessary fittings and fixtures cutting and making good the walls wherever required. |
| 62 | Providing and placing on terrace (at all floor levels) PVC water storage tank of approved make and quality three layered with cover and locking arrangement and making necessary holes for inlet and outlet and overflow pipes complete job. |
| 63 | P/F of 1 H.P water motor of approved quality including fixtures and carriages involved. |
| 64 | Providing and fixing of C.P brass fittings of standard quality and make angle value |
| 65 | Bib cock |
| 66 | wall mixer |
| 67 | brush holder |
| 68 | towel rod |
| 69 | pvc connection |
| 70 | ball value |
| 71 | base value |
| 72 | sink mixer |
| 73 | stainless steel sink |
| 74 | soap case |
| 75 | Health Faucet |
| 76 | C.P grating |
| 77 | P/F PVC pipes and fittings of approved make and quality including jointing / testing complete B type Pipe 100 mm dia |
| 78 | Pipe 75 mm dia |
| 79 | Door Tee 100 mm |
| 80 | Door Tee 75 mm |
| 81 | Plain Tee 100 mm |
| 82 | Plain Tee 75 mm |
| 83 | Reducer 75x100 mm |
| 84 | Elbow 100mm |
| 85 | Elbow 75 mm |
| 86 | P Trap |
| 87 | Floor Trap 100 mm |
| 88 | Coupler Socket 100 mm |
| 89 | Coupler socket 75 mm |
| 90 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, includingcutting and making good the walls and floorswherever required. White vitreous china Orissapattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 91 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 92 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 93 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings |
| 94 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Flexible pipe 40 mm dia |
| 95 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm. |
| 96 | Providing and fixing 600x120x5mm glass shelf with edges round off supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete |
| 97 | approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinable cement primer. |
| 98 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)Qtty vide item 35 |
| 99 | Applying priming coat: With ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 100 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade two or more coats on new work. |
| 101 | Constructing masonry Chamber of specified size, in brick work with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1cement :4 coarse sand) and R.C.C. top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) including necessary excavation, foundation concrete 1:5:10 (1 cement :5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. Chamber size 45x45x45 cm |
| 102 | Carriage of materials by M.T Bricks for avg lead 12 Km |
| 103 | Sand for avg lead 25 Km |
| 104 | Bajree for avg lead 12 Km |
| 105 | Stones for avg lead 9 Km |
| 106 | construction of Brest Wall cum drain on backside of land proposed for construction |
| 107 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 meters: All kinds of soil |
| 108 | Providing/Laying stone soling hand packed level on bed of foundation trenches including cost and carriage involved complete job. |
| 109 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 110 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 111 | Centering and shuttering including strutting, propping etc. and removal of form for foundations footings and bases of columns |
| 112 | Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 50 mm thick with 20mm nominal size stone aggregate |
| 113 | 12 mm thick cement plaster in 1:6 mixes. |
| 114 | Disposal of excavated earth for a lead of 2 Km by M.T |
| 115 | Providing of weep holes 75 mm dia PVC type B pipe complete job at required spacing and length as per x-section of wal |
| 116 | Carriage of materials by M.T Bricks for avg lead 12 Km |
| 117 | Bajree for avg lead 12 Km |
| 118 | construction of fencing around District Sericulture Office |
| 119 | Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 meters: All kinds of soil : |
| 120 | Providing/Laying stone soling hand packed level on bed of foundation trenches including cost and carriage involved complete job. |
| 121 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 122 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 123 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 124 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All Works upto plinth level 1:1½:3 (1 cement: 1½ coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 125 | Reinforcement for RCC work including straightening cutting bending placing in position and binding etc all complete |
| 126 | Centering and shuttering including strutting propping and removal of formwork for foundations footings and bases of columns. |
| 127 | 12 mm thick cement plaster in 1:6 mix |
| 128 | Structural steel work in single section with or without connecting plate including cutting ,hoisting ,fixing in position applying a priming coat of approved steel primer and two or more coats of synthetic enamel paint |
| 129 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineerincharge. Made of G.I. wire of dia 4 mm. |
| 130 | Structural steel welded in built up sections in gates consisting of angles sheets flats round/square bars etc with red oxide steel priming and two coats of paint |
| 131 | Lettering of sign board in letters of required dimension/font/draft as directed by the department including painting of logos or images if required |
| 132 | Stone tile polished work for wall lining over 12mm cement plaster 1:3 mix and cement slurry @ 3.3 Kg/Sqm including pointing in white cement mixed with pigment of matching shade |
| 133 | Carriage of materials by M.T Bricks for avg lead 12 Km |
| 134 | Bajree for avg lead 12 Km |
AI Tender Summary
Tender Timeline
Sep 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 03, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 04, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender