Construction Of Bridge Over Canal At Basantpur (Msme Park), Sambalpur, Odisha.
Tender Value
1.48 Crore
Estimated cost
Bid Submission
05 Oct 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
11800
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
basantpur → Odisha
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Bridge Over Canal At Basantpur (Msme Park), Sambalpur, Odisha.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation of structures in all kinds of soil as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. as per clause 304 of MORTH specification for Road and Bridge works (5th revision)and as directed by the Engineer in charge |
| 2 | Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer-in-charge. |
| 3 | Supplying, Providing & laying Plain cement concrete (1:3:6) grade (cast-in-situ) in nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days as levelling course as per drawing and technical specification section 1000, 1500 & 2100 of MORTH specification for Road & Bridge works (5th revision)as directed by Engineer in charge |
| 4 | Providing supplying and laying Design Mix Reinforced Cement Concrete with grade M25 in Open Foundation complete as per Drawing and Technical Specificationsas per approved drawings and sections 1000, 1500, 1600, 1700 and 2100 of MORTH specifications for road and bridge works(5th revision)completeas directed by Engineer in charge |
| 5 | Providing supplying and laying Reinforced Cement Concrete of grade M30 (Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) in (Abutment/Pier shaft,Deck slab, return wall,retaining wall & flywing etc) as per approved drawings and sections 1000, 1500, 1600, 1700 and 2300 of MORTH specifications for road and bridge works(5th revision) complete as directed by Engineer -in - charge. |
| 6 | Providing supplying and laying Reinforced Cement Concrete of grade M35 (Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) in (Abutment/Pier shaft,Deck slab, return wall,retaining wall & flywing etc) as per approved drawings and sections 1000, 1500, 1600, 1700 and 2300 of MORTH specifications for road and bridge works(5th revision) complete as directed by Engineer -in - charge. |
| 7 | Providing supplying and laying Reinforced Cement Concrete of grade M40 (Cast - in - Situ) using graded crushed stone aggregate and coarse sand, cement of approved quality (IRC 383) as per approved drawings and sections 1000, 1500, 1600, 1700 and 2300 of MORTH specifications for road and bridge works(5th revision) complete as directed by Engineer -in - charge. |
| 8 | Supplying, straightening, cutting, bending, placing in position and tying the grills of HYSD steel reinforcementFe 500 conforming to IS-1786, 2008 in position binding with galvanized binding works of 18 gauge complete for all RCC works in as per working drawing and technical specification section 1000,1500,1600, 2300 of MORTH specification for Road & Bridge works (5th revision) as directed by Engineer in charge. |
| 9 | Rigid and smooth Steel centering and shuttering at all heights of bridge work such as well curb, well steining, well cap, pier and abutment shaft, pier and abutment cap, wing wall, tie beam,slab,beam,girder, road kerb and dirt wall using required nos of vertical and horizontal supports of scaffolding with joists, N.G. rails and channels and steel shutering plates including welding, bolting,cost, conveyance , royalty and all other , of all materials and cost of scaffolding gangway etc. including cost of conveyance of dismantling and disposing debris clear of work site complete to receive reinforcement grills and concrete as per requirement as directed by Engineer-in-Charge |
| 10 | Providing, fitting and fixingstrip seal expansion joint as per approveddrawing and technical specification as per road & bridge work including all cost of material,labour,T&P roalty etc complete in all respect as per direction of EIC |
| 11 | Fixing of Strip seal expansion joint |
| 12 | Fixing of Salitex Board |
| 13 | Supplying, fitting and fixing in position true to line and level elastomeric bearing conforming to IRC: 83 (Part-II) section IX and clause 2005 of MoRTH specifications complete including all accessories as per drawing and Technical Specifications. |
| 14 | Providing and fixing in position tar paper bearingfor slab as per approved drawings and specification |
| 15 | Supplying, fabricatingwelded water tight drainage spout as per technical specificationclause 2705 of specification road and bridge work MORT&H (5th revision) assembly to dimensions shown on drawing of dia not less than 100mm with galvanized steel conforming to IS 226 & fixing in position with suitable fixtures at specified locations on bridge decks including painting two coats with bituminous paint sealed with sealant as per IS 1834 around the spout to the deck slabincluding full compensation to all operations, all inclusive costs, contigencies, incidental involved for the finished defect free item of work complete to specificaton & as directed by engineer in charge. |
| 16 | Providing& fixing PVC 150mm pipe dia of material duly approved as utility duct with all costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer in charge. |
| 17 | Providing& fixing100mmdia DI Pipe of approved make,quality. all costs, all operations contingencies, incidentals involved in the finished defect free item of work as per Drawings and directions of the Engineer in charge. |
| 18 | Providing,laying of filter media with stone crushed agreegate of 45mm size satisfying the requirements laid down in clause 2504 2.2 of MoRTH specifications to a thickness of not less than 600mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment,wing wall and return wall to the full height compacted to a firm condition complete as per drawing and technical specification.complete in all respect and as per direction of the engineer in charge. |
| 19 | Provideing weep holes in brick masonary/plain/reinforced concrete abutement,wing wall/return wall with 100mm dia AC pipe,extending through the full width of the structure with slope 1V:20H towards drawing foce.complete as per drawing and technical specifications.complete in all respect and as perdirection of engineer in charge. |
| 20 | Back filling behind abutment,wing wall and return wall complete as per drawing and technical specification.complete in all respect and as per direction of the engineer in charge. |
| 21 | Granular Material |
| 22 | Sandy Material |
| 23 | Providing and applying two coat of water based cement paint to unplastered concrete surface after cleaning the surface of dirt,dust,oil,grease efflorescense etc.complete in all respect and as per direction of the engineer in charge. |
| 24 | providing and applying one coat priming for bridges including scafolding etc.to unplastered concrete surface after cleaning the surface of dirt,dust,oil,grease efflorescense etc.complete in all respect and as per direction of the engineer in charge. |
| 25 | providing and applying two coats of enamal paint tounplastered concrete surface after cleaning the surface of dirt,dust,oil,grease efflorescense etc.complete in all respect and as per direction of the engineer in charge. |
| 26 | Providing, laying and fixing of interlocking paver block of minimum 60 mm thickness and compressive strength of 300 kg/Sq.cm. laid over cement concrete base of 100mm thick PCC (1:3:6) followed by 50mm thick sand bed including the cost of all materials, labours, conveyance, ,, T&P, etc. complete for the work as per the direction of Engineer-in-Charge. |
| 27 | GST as applicable Will be Paid Extra. |
AI Tender Summary
Tender Timeline
Sep 23, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 05, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 06, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender