Refurbishment And Upgradation Of Entrance Lobby Area Of Training School Hostel Building At Anushaktinagar, Mumbai. - Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material Within 100 M Leadfor Thickness Of Tiles Above 25 Mm And Up To 40 Mm. 2 Dismantling Old Plaster Or Skirting Carefully, Raking Out Joints And Cleaning The Surface For Plaster Including Disposal Of Rubbish To The Dumping Ground Within 100M Lead. 3 Dismantling Doors, Windows & Clear Storey Windows ( Steel Or Wood Or Aluminium ) Including Shutters & Chowkhats ( Frames ) , Architraves, Holdfasts Etc. Complete And Stacking Within 100 Mts. Lead. 4 Of Area Below 3 Sq. M 5 Of Area Beyond 3 Sq. M 6 Lead Charges For Lead Exceeding 4 Km Not Exceeding 5 Km, By Mechanical Transport Includinmg Loading, Unloading, Stacking / Levelling Etc. ( Note : The Rates In Respect Of Itemare Applicable For The Net Quantity Arrived At After Making Deductions For Voids At 30% From Thecorresponding Stack / Truck Measurements. ) 7 Providing Wood Work In Frames Of Doors, Windows, Clear Story Openings And Other Frames, Wrought Framed And Fixed In Position Of Required Size And Shape Including Sawing, Jointing, Making Rebates For Shutters, Making Grooves As Shown In The Drawings, Finishing The Surfaces To The Required Finish All As Per Specifications Anddrawings Including Necessary Ms Hold Fasts 40 Mm X 3 Mm Thick, 200 Mm Long / With Coach Screws Including Protective Painting To The Suface That Will Come In Contact With Walls, Joining Materials, Labour Etc. Complete All As Per Specifications And As Directed By The Engineer-In-Charge. Using Second Class Teak Wood Only. 8 Providing And Fixing 35 Mm Thick Flush Door Shutters Conforming To Is : 2202 Non-Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Commercial 3 Ply Veneering With Internal Teak Wood Lipping 25Mm Wide And Fixing With 4 Nos Of 125 Mm Long Stainless Steel Hinges With S.S. Wood Screws Complete. 9 Providing And Fixing Decorative High Pressure 1.5 Mm Thick Laminated Sheet Of Plain / Wood Grain In Gloss / Matt / Suede Finish With High Density Protective Surface Layer And Reverse Side Of Adhesive Bonding Quality Conforming To Is:2046 Type S Including Cost Of Adhesive, Labour Etc. Complete As Directed 10 Providing And Fixing 12 Mm Bison Board Including Adhesive Material, Screw Etc. As Directed By Engineer-In-Charge. 11 Providing And Applying French Spirit Polishing For Wooden Sufaceswith Twocoats On New Works Including A Coat Of Wood Filler To Form A Uniform Neat Finishas Directed By The Engineer -In-Charge And / Or As Per The Specifications Complete As Directed By The Engieer-In-Charge 12 Providing And Fixing Anodized Aluminium Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections / Z Sections And Other Sections Of Approved Make Conforming To Is 733 And Is 1285 Fixed With Rawl Plugs And Screws Or With Fixing Clips Or With Expansion Hold Fastners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Gasket Etc. Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Whereever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Panelling, C.P Brass / Stainless Screws All Complete As Per Drawings And And Directions Of Engineer-In-Charge Including Providing And Fixing Hinges / Pivots And Making Provision For Fixing Of Fittings Wherever Required Including The Cost Of Pvc / Neoprene Gasket Required Filling The Gaps Using Silicon Grout Sealent Etc. ( Fittings Glazing And Panelling Shall Be Paid For Separately ) Note : 1 ) The Rates For Aluminium Is Inclusive Of All Fastners Required For Fabrication And Fixing In The Walls. 2 ) All Joints Shall Be Of Mittered Joints 3 ) A Long M.S Rod Threaded At Both Ends To Be Provided In All Aluminium Door Shutters In Top &Bottom Horizontal Members Internally Connecting Vertical Members And Fixed With M.S Washers & Nuts. 4 ) Only Aluminium Members Alone Shall Be Measured And Paid For. 13 Anodised Aluminium Sections ( Minimum Anodizing Thickness Of 15 Micron ) 14 Polyster Powder Coating On Aluminium Sections 15 Providing And Fixing Glazing In Aluminium Doors, Window, Ventilator Shutters And Partitions Etc With Pvc / Neoprene Gasket Etc. Complete As Per The Architectural Drawings And Directions Of The Engineer-In-Charge ( Cost Of Snap Beading Shall Be Paid In Basic Item ) 16 Withclear Float Glass Panes Of 6.00 Mm Thickness 17 Design, Fabrication, Supply And Installation Of Frameless Façade Using Clear, Toughened Float Glass Of Specified Thickness For Fixed Glazing And Openable Panels ( Doors ) With Crystal Edge Polish ( Dorma Pt Range Or Approved Equivalent ) For Swing Doors, Hunged On Floor Spring, , S.S.Handles And Locking Arrangement And Clear Toughened Float Glass Fixed For Fins And All Joints Sealed With Weather Silicone Sealent And Fixed Portion Glass From Top Sides And Bottom With Anodised ( Minimumthickness 25 Microns ) Aluminium C Channels ( 25 Mm X 25 Mm X 1.5Mm Thick ) And All Glass To Glass Joints Sealed With Clear Thick Weather Silicone Sealent And Making The Required Grooves In Plaster / Concrete For Fixing Channels Etc And Making Good The Same With Sealent / Plaster Of Paris Etc. Complete All As Per Approved Shop Drawings, Specifications And As Directed By Engineer-In-Charge. ( Shop Drawings To Be Prepared By The Contrator As Per The Site Conditions And The Same Shall Begot Approved By Engineer In Charge Before Procurement. ) 18 Frameless Fixed Panels Using 12Mm Thick Clear Toughened Float Glass Including Making Cut Outs, Finishing The Edges Sealents Etc Complete. Glass Area Alone Shall Be Measured And Paid. 19 Providing And Fixing Approved Quality And Shape Star Locks Cum Handle Of Midin Or Approved Equivalent Make For Slidingshutters. 20 Providing And Fixing Approved Quality Stain Less Steel Body Roller Wheelsof Approved Make For Slidingshutters 21 Providing And Fixing Stainless Steel ( Ss 304 Grade ) Adjustable Friction Windows Stays Of Approved Quality With Necessary Stainless Steel Screws To The Side Hung Windows As Per Specifications And As Directed By The Engineer-In-Charge 22 205 X 19 Mm 23 255 X 19 Mm 24 Design, Fabrication, Supply And Installation Of Frameless Openable Panels ( Swing Doors ) Using Clear, Toughened Float Glass Of Specified Thicknessopenable Panels ( Doors ) With Crystal Edge Polish And Necessary Patch Fittings ( Dorma Pt Range Or Approved Equivalent ) For Swing Doors, Hunged On Floor Spring, Having A Length Of 1200 Mm Minimum, S.S.Handles And Locking Arrangement And Clear Toughened Float Glass Fixed For Fins And All Joints Sealed With Weather Silicone Sealent And Fixed Portion Glass From Top Sides And Bottom With Anodised ( Minimum Thickness 25 Microns ) Aluminium C Channels ( 25 Mm X 25 Mm X 1.5Mm Thick ) And All Glass To Glass Joints Sealed With Clear Thick Weather Silicone Sealent And Making The Required Grooves In Plaster / Concrete For Fixing Channels Etc And Making Good The Same With Sealent / Plaster Of Paris Etc. Complete All As Per Approved Shop Drawings, Specifications And Asdirected By Engineer-In-Charge. ( Approximate Size Of The Openings ) . 25 Frameless Openable Panels ( Swing Doors ) Using 12Mm Thick Toughened Float Glass For Door Leaves With The Required DormaS Pt Range Or Approved Equivalent Patch Fittings, Bts-80 Floor Springs, 1200Mm Long Stainless Steel Handles ( Dorma / Kich Make Or Approved Equivalent ) , Corner Lock With Strike Plate And Cylinder. 26 Designing, Providing And Fixing Of 4 Mm Thick Approved Make And Shade Aluminium Composite Metal Panel Of Approved Make Cladding At Different Locations Including Soffits Of Over-Hangs But Excluding Aluminium Frame Work With Grids Filled In With Weather Silicon Sealant As Per The Drawings. The Acm Panel Composition Shall Be Of 0.5 Mm Thick Pvdf Coatedaluminium Sheet + 3 Mm Thick Low Density Polyethelene Virgin Resin Core + 0.5 Mm Thick Polyester ( Pvdf ) Coated Aluminium Sheet All Complete As Per Approved Shop Drawings And Specification ( Aluminium Frame Work Will Be Paid Under Reelevant Item ) Note : Acmp Shall Be Measured To The Actual Visible Area Of The Acp Sheet Including Silicon Joints As Fixed On Site. 27 Providing & Fixing Epdm Herculan Mf-Od10mm Or Approved Equivalent Synthetic Flooring And Matching Shade Complete As Per Patterns, Drawings And Specifications Complete As Directed By Engineer-In-Charge. 28 Providing And Fixing Glazed Vitrified Floor Tiles In Floor And Dado Of Approved Make In Different Sizes Conforming To Is 15622 Inall Colours And Shades In Glossy Or Matt Or Satin Finishlaid Over A Bed Of Minimum20 Mm Thick Bed Of Cement Mortar 1:4 ( Using Crushed Sand ) And Jointing With Grey Cement Slurry Including Grouting With The Joints Withwhite Cement Based Tile Grout Of Approved Make And Matching Shade Complete As Per Patterns, Drawings And Specifications Complete As Directed By The Engineer-In-Charge 29 Using Tiles Of Size 800 X 1600 Mm 30 Provding And Constructing Brick Workin Cement Mortar Using Standardbricks Of Approved Class / Quality, Make Or Brandin Foundation And Plinth Including Curing, Raking Out Joints, Simultaneous Pointing Below Plinth Level If Specified, Complete As Perdrawings, Specifications And As Directed By The Engineer-In-Charge 31 Brick Workin C.M 1:4 Using Crushed Sand. 32 Providing 20 Mm Thick External Plastering In Two Coats Under Layer 12 Mm Thick With C.M 1:4 ( Usingcrushed Sand ) Finished With A Top Layer 8 Mm Thick In C. M 1:3 ( Using Crushed Sand ) Including Approved Water Proofing Compound @ 2% By Weight Of Cement Or As Per ManufacturerS Specifications, Sieving Of Sand To Required Fineness, Scaffolding Up To 10 Metres Height, Finishing, Curing Etc. Complete As Per Specifications. And As Directed By The Engineer-In-Charge 33 Providing 15Mm Thick Plastering Using Ready Mix Internal Plastering Compound Of Approved Make For Internalfaces Of Brickwork / Concrete Surfaces Including Preparation Of The Surface, Curing, Cleaning, Scaffolding Completeall As Per Specifications And As Directed At Site By The Engineer-In-Charge 34 Providing And Laying In Position Cement Concrete Of 1:2:4 ( 1 Cement, 2 Crushed Sand, 4 Graded Stone Aggregate Of Nominal Size 20 Mm ) Including Consolidation, Finishing, Curing Etc. Complete As Per Specification And Drawingsbut Excluding The Cost Of Formworkshuttering, Centering And Steel Reinforcement At All Levels 35 Providing , Centering , Shuttering Form Work Using Pvc Film Faced Plywood To Get A Neat Form Finish Surface For All Types Of Structures Including Necessary Strutting, Proping, Staging, Supports Etc And Deshuttering The Same After The Specified Time All As Per Drawings And Specifications At All Levels ( For Super Structure ) 36 Providing, Supplying And Laying Pre Polished Granite Slab Flooring / Dado / Wall Cladding With Not Less Than 15-17 Mm Thick Graniteslabsover20 Mmthick Base Cement Mortar 1:4 ( Using Crushed Sand ) Laid And Placedwith Grey Cement Slurry Including Filling The Joints With Matching Whitecement Basedtile Groutcomplete All As Per Specifications And Drawings. 37 Usingapproved Black Shade / Lather Finish 38 Usingapproved Shades Other Than Black 39 Extra For Providing Edge Moulding Upto 17 Mm Thick Granite Slab Counters, Vanitis Etc. Including Machine Polishing To Edge To Give High Gloss Finish Et. Complete As Per Design Approved By Engineer-In-Charge. 40 Granite Work 41 Providing 3 Level Polishing Including Mirror Polishing Of Terrazo / Stilan / Kotah Stone Flooring Complete As Directed By The Project Engineer. 42 Providing And Applying Wall Painting Two Coats On New Work With Premium Plastic Emulsion Paint Of Approved Brand To Give An Even Shade, Including A Coat Of Approved Cement Primer, Including Preparation Of The Surfaces, Scaffolding Complete. As Per Specifications And As Directed By The Engineer-In-Charge 43 Providingand Laying Flooring Plaster Of Paris 8Mm Thick Over New Laid Tiles Including Spreading Polythene Paper, Curing, Levelling, Removal And Disposalof Same Before Cleaning Floor, Labour, Tools Etc. Complete Andas Directed By Engineer In Charge. 44 Providing, Supplying And Fixing Velvet Curtains Of M / S Om Pile Pvt Ltd Make Or Equivalent Approved Including Fabric And Accessories Necessary Forfixing Of Curtain As Per Approved Fixing Arrangement. Fabricatingcurtains To Required Design, Pattern, Sizes Etc As Per Approved Design And Approved Fabric 100% Cotton Of Width Around 142Cm ( 56 ) Of Weight 450 Gsm Complete All As Directed By The Engineer In Charge. 45 Providing And Fixingapproved Make Lay In False Ceiling 600 X 600Mm Unperforated Corrosion Resistant Aluminium Magnesium Alloy Metal Panelfixed In 24 Mm T Frame Work Of Module 600 X 600 Mm. Panels Shall Be Manufactured By Hunders Douglas Or Approved Equivalent Of Size575 Mm X 575 Mm Of Approved Colour In 0.70 Mm Thickaluminium Alloy3105 With Square Edges Tiles To Bestove Enamelled On A Continuous Application For Pre-Treatment. The Coils To Be Go Through4 Stages Of Pre-Treatment Three Times Of Oven Baked Through Conversion Coating , Priming And Finish Coat Ensuring Superior Adhesion, High Corrosion Resistance And Good Colour Stability.The Coils To Be Painted On Both Sides After Degreasing. Inside Surface To Have A Primer Of 5 Microns And A Coat Of Natural Colour Of 5 Microns, Exposed Surface To Have A Primer Of 5 Microns, Binder Of 5 Microns And A Topcoat Ofapproved Colour 15 Microns. Grid System For Fixing Ceiling Tiles Shall Comprise Of Tees. The 24 Mm Main Tee Runers Shall Be Suspended At An Interval Of 1200 Mm Centre To Centre. The 24 Mm Cross Tee Runner Shall Be Suspended At An Interval Of 600 Mm Centre To Centre And Further Supported With 24 Mm Cross Tee With Inter Locking Arrangements To Form A Grid Of 600 Mm X 600 Mm. The Main Tee Shall Be Supported By Means Of 4 Mm G.I.Rod From Slab / Roof. The Suspension Shall Be Provided At1200 To 1500 Mm Centre To Centre.Provision Forlights, Diffusers Etc To Be Made Including Extra Supports Wherever Necessary. Measurements Shall Be As Per Actual Area Of False Ceiling With Out Deductions For Lights And Diffusers. 46 Providing And Fixing In Position Suspendedseamless False Ceiling System Using 12.50 Mm Thick Moisture Resistantplain Gypsum Board ( Gyproc.Mr Of M / S .Saint Gobain Make Or Approved Equivalent ) Suspended Ceiling, Which Includes Gypsteel Ultra™ Crp Surface Or Approved Equivalent Ribbed Perimeter Channels ( Having One Flange Of 20Mm And Another Flange Of 30Mm And A Web Of 27Mm ) Along The Perimeter Of Ceiling, Screw Fixed To Brick Wall / Partition With The Help Of Nylon Sleeves And Screws, At 610Mm Centres. Then Suspending Gypsteel Ultra™ Crp Surface Ribbed Intermediate Channels Of Size 45Mm ( With Two Flanges Of 15Mm Each ) From The Soffit At 1220Mm Centres With Gypsteel Ultra™ Crp Surface Ribbed Ceiling Angle Of Width 25Mmx10mm Fixed To Soffit With Gi Cleat And Steel Expansion Fasteners ( Mfg By Ms Saint Gobain Gyproc Or Approved Equivalent ) . Gypsteel Ultra™ Crp Or Approved Equivalent Surface Ribbed Ceiling Section Of Having Web Of 51.5Mm And Two Flanges Of 26Mm Each With Lips Of 10.5Mm Are Then Fixed To The Gypsteel Ultra™ Or Approved Equivalent Intermediate Channel With The Help Of Connecting Clip And In Direction Perpendicular To The Gypsteel Intermediate™ Channel At 457.5Mm Centres.Single Layer Of 12.5Mm Tapered Edge Gyproc® Mr ( Conforming To Bs 1230 Part 1 ) Is Then Screw Fixed To Ceiling Section With 25Mm Drywall Screws At 230Mm Centres.Screw Fixing Is Done Mechanically Either With Screw Driver Or Drilling Machine With Suitable Attachment. Finally Square And Tapered Edges Of The Boards Are To Be Jointed And Finished So As To Have A Flush Look Which Includes Filling And Finishing With Gyproc Jointing Compound, Gyproc Joint Paper Tape And Two Coats Of Drywall Top Coat ( As Per Recommended Practices Of M / S Saint- Gobain Gyproc India Or Approved Equivalent ) 47 Providing Vision Panel Not Exceeding 0.1 Sqm In All Type Of Flush Door Including Fixing 4 Mm Clear Glass With Necessary Teak Wood Beadings Complete All As Per Specifications And As Per Drawings. 48 Supplying Of Unskilled Man Power / Labour For Loading / Unloading, Area Cleaning And Miscworks. Etc. Including Cost Of Equipement Whichever Is Required At Site. 49 Providing And Laying 6 Mm X 6 Mm Square Brass Strip For Inlay In Flooring As Per Approved Pattern, Rate Includes Machine Cut Precise Groove For Fixing Brass Strip And Brass Strip Should Be Fixed In Floor With Required Chemical.The Quoted Rate Shall Also Include All Tools & Tackles, Consumables, Epoxy Etc., Transportation, And Making Area Good After Fixing Bass Strip, All Complete As Directed By Engineer-In-Charge. 50 Providing And Fixing Genesis Tdp 100 Black Tiles Trims8 Mm Width Corner Strips Square Ss For Inlay In Column`S Corneras Per Approved Pattern, Rate Includes Machine Cut Precise Groove For Fixing Strip And Strip Should Be Fixed In Floor With Required Chemical. The Quoted Rate Shall Also Include All Tools & Tackles, Consumables, Epoxy Etc., Transportation, And Making Area Good After Fixing Square Inlay, All Complete As Directed By Engineer-In-Charge. 51 Providing And Applying 2 To 3 Coats Of Melamine Polish Of Best Approved Make And Shade To Wooden / Plywood Surface, Etc., As Per Manufacturers Specifications Including Preparing Surfaces And As Directed By Engineer In Charge Etc. Complete. 52 Providing And Applying French Spirit Polishing For Wooden Surfaceswith Twocoats On New Works Including A Coat Of Wood Filler To Form A Uniform Neat Finishas Directed By The Engineer -In-Charge And / Or As Per The Specifications Complete As Directed By The Engineer-In-Charge 53 Providing And Fixing 3 Mm Thick Veneer, Approved Make And Shade Fixed Over Suitable Base Like Cement Board In Wall Cladding Etc.The Quoted Rate Shall Include All Tools & Tackles, Consumables, Nails & Screws Etc., Transportation, Labours , All Complete As Directed By Engineer-In-Charge. 54 Providing And Fixing12mm Thk Bwp Marine On Existing Partition Frame / Wall / Etc. With Necessary Hardware With 1Mm Laminate / Veneer Of Approved Shade / Colour All Complete As Per ArchitectS Instructions & Detail Drawings And As Directed By Engineer-In-Charge. 55 Providing And Fixing6mm Thk Bwp Marine On Existing Partition Frame / Wall / Etc. With Necessary Hardware With 1Mm Approved Laminate / Veneer Of Approved Shade / Colour All Complete As Per ArchitectS Instructions & Detail Drawings And As Directed By Engineer-In-Charge. 56 Providing And Fixing18mm Thk Bwp Marine Ply On Existing Partition Frame / Wall / Etc. With Necessary Hardware With 1Mm Laminate / Veneer Of Approved Shade / Colour All Complete As Per ArchitectS Instructions & Detail Drawings And As Directed By Engineer-In-Charge. 57 Providing And Fixing 304 Grade Stainless Steel Pipesof Approved Size And Make And Quality By Cutting And Placing In Position Including Embedding If Necessary Complete As Per Specification And As Directed By The Engineer In Charge 58 Providing, Supplying And Fixing Venetian Roller Blindsof Approved Make With All Accessories And Fabricating To Required Sizes Etc. As Per Approved Design And Approved Fabric Complete All As Directed By The Engineer-In-Charge. 59 Fabrication , Supply And Installation / Fixing On Wallof Frp Murals Of Approved Design / Scheme Including Teak Wooden Framework And Appropriate Wooden Backing. The Frp Murals Shall Be Designed In Consultation With Engineer-In-Charge / Architect. Cost Includes Making Of Clay Model And Getting It Preapproved Before Casting, Pu Coating & Melamine Polishing And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 60 Frp Murals Abstract 61 Frp Murals Figurative 62 Fabrication , Supply And Installation / Fixing On Wallof Painting Of Approved Design On Canvas With Approved Wooden Framing Of Required Thickness And Design. Cost Includes Creating Of Unique Painting Based On Clients Ideas / Thoughts And Submitting Draft Painting In Digital Form For Approval And Making Of Final Painting On Canvas And Fixing On Wall With Required Approved Framing And As Directed By The Engineer-In-Charge. 63 Canvas Painting Abstract / Contemporary 64 Canvas Painting Figurative 65 Supplying And Installation At Required Location Premium Quality Illuminating Pebbles Without Inner Made Of Roto Moulded ( Lldpe ) Material Having Built-In Led Soft Light Of Following Sizes Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 66 Pebble Size Small - 43 Cm Dia ( L ) And 22 Cm ( W ) Depth And 16Cm ( H ) 67 Pebble Size Medium - 60 Cm Dia ( L ) And 45 Cm ( W ) Depth And 23Cm ( H ) 68 Pebble Size Big - 80 Cm Dia ( L ) And 58 Cm ( W ) Depth And 29Cm ( H ) 69 Supplying And Installation At Required Location Premium Quality Pebbles Of Approved Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 70 Pebble Stone, Makrana Stone, Transparent Pebble 71 Supplying And Installation Of Polycarbonate Sheet 5Mm Thick For Frp Tray Including Cost Of Ss Screw And Epoxy, Consumables Etc. 72 Supplying And Installation At Required Location Premium Quality Designer Frp Tray Of Required Sizes Of Approved Make, Colour, Shade, Finish And Shape All As For Pebble Stone And Led Lighting As Directed By The Engineer-In-Charge 73 Fabrication, Supply And Installation / Fixingof Ss Laser Cut Jali2mm Thickin Approved Finish Shade Of Ss304 With Frameas Per Approved Shop Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 74 Fabrication , Supply And Installation / Fixing Of Frp Round Sculpture ( Contemporory ) In Approvedfinish With Pu Coating. Size-450Mm X 900 Mm ( Height ) . The Height Shall Be Taken Proportionately. Drawing / Clay Model Of Sculpture Shall Be Pre-Approved Before Casting And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 75 Fabrication , Supply And Installation / Fixing Of Gi Metal Sculpture ( Four Dimentional ) In Approvedfinish With Pu Coating. Size-600Mm X 1800 Mm ( Height ) . The Height Shall Be Taken Proportionately. Drawing / Clay Model Of Sculpture Shall Be Pre-Approved Before Casting And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 76 Fabrication , Supply And Installation / Fixing Of Frp Welcome Sculpture ( Four Dimentional ) In Approvedfinish With Pu Coating. Size-450Mm X 900 Mm ( Height ) . The Height Shall Be Taken Proportionately. Drawing / Clay Model Of Sculpture Shall Be Pre-Approved Before Casting And Shall Be As Per Approved Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 77 Fabrication, Supply And Installation / Fixingof Ss Lettering In Approved Finish Shade In English Tsh. The Letter Shall Be Of Ss304 Grade, Size 600Mm By 900Mm, 25Mm Thick And Proportionate Width As Per Approved Shop Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 78 Fabrication, Supply And Installation / Fixing On Wallof Ss Lettering In Approved Brass Finish Shade In English Barc, Atoms In The Service Of Nation, Barc Guest House & Trainees Hostel And Hindi??????? ?? ???? ??? ??????, ???? ?????? ????? ??? ??? ????????? ?????????. The Letter Shall Be Of Ss304 Grade, Size Between 50Mm To 150Mm, 1.5Mm Thick ( As Per Exisiting Logo ) And Proportionate Width As Per Approved Shop Drawings And Technical Specifications And As Directed By The Engineer-In-Charge. 79 Providing, Applying One Coat Of Acrylic Based Textured Plaster Of Approved Make With The Finish As Directed With Average Thickness Of 2.50 Mm And Finished With 2 Coats Of High Performance Coating Of Approved Shade Including Preparation Of The Surfaces, Complete. As Per Specifications And As Directed By The Engineer-In- Charge. 80 Supplying And Installation At Required Location Premium Quality Illuminating Pots Made Of Roto Moulded ( Lldpe ) Material Having Built-In Led Soft Light Of Following Sizes Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 81 Pot Size - 30 Cm Dia And 30 Cm Depth To Fit 10 Pot 82 Pot Size - 40 Cm Dia And 40 Cm Depthto Fit 12 Pot 83 Pot Size - 50 Cm Dia And 50 Cm Depth To Fit 16 Pot 84 Supplying And Installation At Required Location Premium Quality Designer Frp Pots In Sand Stone Finish Of Following Sizes Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge 85 Pot Size - 45 Cmand 45 Cm Depth ( Quebec 45 ) 86 Pot Size - 43 Cmand 72 Cm Depth ( Rib High Medium ) 87 Pot Size - 100Cmand 45 Cm Depth ( Barca Req. ) 88 Pot Size - 40Cmand 78 Cm Depth ( Paris Big ) 89 Supplying And Installation At Required Location Premium Quality Designer Brass Flower Pot Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 90 Supplying And Installation At Required Location Premium Quality Designer Brass Flower Pot Delicate Slim Design Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge. 91 Supplying And Installation At Required Location 2.7 To 3.0 M Dia. Approx. Pvc Coated Fabric With Special Pvdf Coating Roofing Material Umbrella With Side Steel Stand Of Approved Make, Colour, Shade, Finish And Shape All As Directed By The Engineer-In-Charge 92 Providing And Fixing Glass Mosaic Tiles ( Size Approx. 20Mm X 20 Mm X 04 Mm Thick And / Or As Per Site Requirement On The Curved Surfaces ) In Particular Pattern ( Barc Logo ) Including Digital Uv Printing On Glass Mosaic. All Glass Mosaic Tiles Shall Be Mounted On Silicon Mesh And Fixed With Laticrate Sp 100 Fixing Fixing Adhesive & Mapei Transparent Epoxy Grout As Required As Per Specificatins And Manufacturers Recommendations. The Rate Shall Include Cost Of Preparing The Surfaces, Filling The Depressions / Undulations With Epoxy Material Suitably, Cost Of All Labours, Transportation, Taxes, Epoxy Adhesive For Fixing Glass Moasic Tiles Etc. Complete And As Directed By Engineer-In-Charge.
