Drinking Water Supply and Sanitation Government Departments Closing in 0 days TDR #34060980

Supply, Installation And Commissioning Of Electro-Mechanical Components Of Augmentation Of Daulatpur Water Supply Scheme Tw No. Ii In The District Of Dakshin Dinajpur Under Malda Mechanical Division, Phe Dte.-2 Submersible Pump Directly Coupled

Issued by Government Departments · malda, West Bengal
Tender Value
8.31 Lakhs
Estimated cost
Bid Submission
17 Oct 2022
0 days left
EMD
16624
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
malda → West Bengal
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply, Installation And Commissioning Of Electro-Mechanical Components Of Augmentation Of Daulatpur Water Supply Scheme Tw No. Ii In The District Of Dakshin Dinajpur Under Malda Mechanical Division, Phe Dte.-2 Submersible Pump Directly Coupled With Water Proof Suitable Size Motor Having Following Specification And As Per Nit Specification:Pumpdischarge Of Clear Water = ( Q ) = 30 M3 / Hr.Total Head ( H ) = 58 M.Shaft- Stainless Steelimpeller- S.S / Gmoutlet Size-80 Mmmotorsubmersible Type 3 Phase, 50 Hz, 415V ± 10% , 2900 Rpmmotor Mustbe Suitable For Operation With Star-Delta Startertest Certificate Along With Characteristic Curve Shoule Besubmitted At The Time Of Delivery. 3 1.1 Kv Grade 4 Sq.Mm X 3 Core Water Proofflat Submersible Cable For Above Motor. 4 1.1 Kv Grade 25 Sqmm 3.5 Core Xlpe Insulated Al. Ar. Cable Cable Conforming To Is-7098 ( Part-1 ) 1988 With Upto Date Amendment. 5 Supply, Delivery And Storage At Site Of Wall Mounted 2 Mm. Thick Epoxy Painted Sheet Steel Enclosed Front Open Fully Panel For Fully Automatic Cum Manual Control Centre For Operation Of The Pump Motor In Star-Delta Mode Ranging From 7.5 Hp To 12.5 Hp, Actuator With Dol Starter, Chlorinator With Dol Starter And Timer Operated Outdoor And Indoor Lighting And Also Spares Feeder As Per Approved Drawingand Nit Specification. 6 Supply And Delivery Of The Following Valves, Pipes, Gauges Etc. At Site. 7 80 Mm Dia M.S. Seamless Column Pipe ( Black ) 6.8 Mm To 7.1 Mm Thick With 150 Mm Long Heavy Type Socket At One End. 8 3.00 Mtr. Long Excluding Socket Having 8 T.P.I. Thread. 9 1.5 Mtr. Long Excluding Socket One End Having A Thread Of 11 T.P.I. & The Other End Having A Thread Of 8 T.P.I. 10 Heavy Type Suitabledia Ms Suspension Clamp Along With Nuts Bolts And Washer. 11 Cast Iron Wafer Type Three Phase Actuator ( Rotork Range, Three Phase 415 V, Multiturn Electrically Actuated ) Operated Butterfly Valve Of Dia 80Mm ( P.N-1.0 ) As Per ( Is-13095 Ip-68 ) Test Certificates From Both The Manufacturer Are To Be Submitted At The Time Of Delivery 12 80Mm Dia Cidf Sluice Valve-1 No., Non Return Valve-1 No., Cidf 90° Bend-1No., Ci Flanged Tee-1No. Blank Flange-1No., Ci / Ms Flanged Short Piece 0.50 Mtr.-1 No, Ci / Ms Flanged Pipe 1 Mtr.-1 No. Etc As Per Is Specification And Certification For Construction Of Delivery Pipe Line And Wash Out Line. 13 Heavy Type 250 Mm Dia Split Type Tube Well Cover With 12 Mm Thick Clamping Arrangement Including Holes Of Column Pipe, Air Pipe And Cable Entry With 2 Sets Heavy Type Suspension Clump, Nuts, Bolts And Washer As Per Departmental Design. 14 Depth Gauge 100Mm Dia With Steel Air Pipe Of Required Length With All Accessories For The Above Work Including Supply Of Good Quality Hand Pump. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 15 Pressure Gauge ( H.Guru / Febig ) 150Mm Dia ( 0-7Kg / Sq.Cm ) Brass Cock And Fitting Complete. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 16 50 Mm. Dia. Non Metalic Pipes ( Is:14930 ) And Specials For Protection Of Submersible Cable ( As Per Site Requirement ) 17 Anti Snapping Safety Device For Pump Set By Supplying Suitable Size Ms Clamps Two Sets And Nylon Rope Of Required Length Including Supplying Of Nuts, Bolts And All Other Materials. 18 Supply And Delivery Of 100 Amps Male Female Kit Katfuse Unit 19 100 Amp 415 V Rewireable Type Tpn Main Switch. 20 Laying Of 25 Sq. Mm. 3.5 Core Al. Ar. Cable In Wall / Floor By Supplying Of All Necessary Materials As Per Ie Rules And As Per Direction 21 Installation Of The Materials ( To Be Supplied Under Above Sl No 1.01 To 3.11 ) Such As Pump Motor Set With Column Pipes, Valves, Panel, Fiting Fixing Pressure Gauge, Depth Gauge, Non-Return Valve & Drawing Delivery Out-Let & Washout Line With The Supplied Specials / Accessories By Providing Antisnapping Cage Of Suitable Size Including Supply Of Cable Gland, Sockets, Wooden Board, Control Cable Etc Including Brick, Sand, Cement Rod Etc As Required To Complete The Job As Per Direction And Up To The Entire Satisfaction Of The Eic. 22 Making Brick Pillar 0.25 Mtr X 0.25 Mtr. For Supporting Of Valves And Pipes With 12 Mm Thick Plaster And Net Cement Finish Complete. 23 Supply, Delivery Of M.S Kiosk Box Of 661Mm X 559 Mm ( Lxw ) Size Having Thickness Of 1.5 Mm With Angle Support At Four Legs Having Hight Of 661 Mm With Provision Of Locking Arrangement, Supply Of Lock, Cable Entry Point Incl Painting By One Coat Of Black Paint Over One Coat Of Primer All Complete. 24 Making Suitable Size Pump Foundation Including Erection Of Kiosk Box With Supplying Of Necessary Cement, Sand And Stone Chips Including Plastering And Net Cement Finish Complete. 25 Making Double Earthing Arrangement In Compliance With Ie Rules By G.I. Pipe Electrode Of 50 Mm. Dia 3 Mtr. Long 2 Nos For Panel And Pumping Machinery 25 Mm. X 6 Mm. G.I. Earth Strips From Earth Pit To Panel And All Other Accessories Required To Complete The Work. 26 Making Internal Electrification Of Pump House Consisting Of Two Bracket Point, One Tube Light Point, Two Bulk Head Point, One Fan Point And 1 No. 74 Watt Led Fixture With Arm Bracket At Outside And One Three Pin Plug Point Including Supply Of All Necessary Materials To Complete The Work As Per Ie Rules And As Per Direction ( All The Fittings And Lamp Should Be Led Type As Per Choice Of Eic ) 27 Supply And Delivery Ofpvc Moulded Chair. 28 Supply And Delivery Of Pvc Moulded Table. 29 Supply, Delivery & Installation Of The Following Fan As Directed By Eic.Ceiling Fan 1200Mm Sweep Including Fan Clamp As And When Required. 30 Supply & Delivery Of Automatically Controlleddiaphargm Type Chlorinator For Accurate Dosing Of Chlorine Solution Into The Waterby Connecting Metering Pump ( Diaphargm Type ) Having Following Specification:- Pump Type ::Diaphargmliquid ::Chlorine Solutioncapacity ( Lph ) :: 0-100Pressure Kg / Cm2 ( Testing ) :: 10Pressure Kg / Cm2 ( Suction ) :: Floodedpressure Kg / Cm2 ( Hydro ) :: 15Connection Suction :: ½” Hose Holderconnection Discharge :: ½: Hose Holdermoc Liquid End :: Ppdiaphragm :: Ptfenrv :: Ppdrive Capacity :: 0.5Hp, 3 Phase, 50Hz, 415V, 1440 Rpmmotorcoupling Capacity :: Flexible Spiderstrainer :: Y Type, Pp, ½” Bsp ( F ) Pressure Relief Valve :: Inbuilt.Solution Tank :: 100 Ltr Capacity ( Including Making Provision For Inlet Line To The Actual Storage Tank Of Dosing Solution Of All Materials. Test & Warrantycertificatesare To Be Submitted At The Time Of Delivery 31 Installation Of Above Supplied Chlorinator With All Accessories, Pvc Tankand Drawing Of Power Line As Per Ie Rules By Supplying Pvccopper Wire & Continuous Earthing. This Includes The Cost Of All Necessary Cc Foundation ( At Least 200Mm Height ) With Concrete Mixture ( Sand, Cement, Stone ) And Neat Cement Finish By Supplying Of All Required Materials And Testing The Entire Set As Perentire Satisfaction Of The Eic. ( Power Will Be Fed From Plc Panel Of Pumping Machinery ) 32 Commissioning Of The Installation And Trial Run For 7 Days On Full Load In Automode With Full Satisfaction Of Eic. 33 Make As Per Departmental Approved Vendor List Circulated Vide Memo No.Phe / Iv / 2277 / W-181 / 19 Dated- 25 / 09 / 2019 34 Add Gst @ 18% 35 Add Cess @ 1%

BOQ

Name of Work: Supply, installation and commissioning of electro-mechanical components of Augmentation of DAULATPUR Water Supply Scheme T/W no. II in the District of Dakshin Dinajpur under Malda Mechanical Division, PHE Dte.
Sl. No. Item Description
1Supply and delivery at site of following pumping machinery and electrical accrssories:
2Submersible Pump directly coupled with water proof suitable size motor having following specification and as per NIT specification:PumpDischarge of clear water = (Q) = 30 m3/hr.Total Head (H) = 58 M.Shaft- Stainless SteelImpeller- S.S/GMOutlet Size-80 mmMotorSubmersible type 3 phase, 50 Hz, 415V ± 10% , 2900 RPMMotor mustbe suitable for operation with star-delta starterTest Certificate along with characteristic curve shoule besubmitted at the time of delivery.
31.1 KV Grade 4 sq.mm x 3 core water proofflat submersible cable for above motor.
41.1 KV Grade 25 sqmm 3.5 core XLPE insulated AL. Ar. Cable cable conforming to IS-7098 (part-1) 1988 with upto date amendment.
5Supply, delivery and storage at site of wall mounted 2 mm. thick epoxy painted sheet steel enclosed front open fully panel for fully automatic cum manual control centre for operation of the pump motor in STAR-DELTA mode ranging from 7.5 HP to 12.5 HP, actuator with DOL starter, Chlorinator with DOL starter and timer operated outdoor and indoor lighting and also spares feeder as per approved drawingand NIT specification.
6Supply and delivery of the following valves, pipes, gauges etc. at site.
780 mm dia M.S. seamless column pipe (black) 6.8 mm to 7.1 mm thick with 150 mm long heavy type socket at one end.
83.00 mtr. Long excluding socket having 8 T.P.I. thread.
91.5 mtr. Long excluding socket one end having a thread of 11 T.P.I. & the other end having a thread of 8 T.P.I.
10Heavy type suitabledia MS suspension clamp along with nuts bolts and washer.
11Cast Iron Wafer type Three phase Actuator (Rotork range, three phase 415 V,multiturn electrically actuated) operated Butterfly Valve of dia 80mm (P.N-1.0) as per (IS-13095 IP-68)Test Certificates from both the manufacturer are to be submitted at the time of delivery
1280mm dia CIDF Sluice Valve-1 no., Non Return Valve-1 no., CIDF 90° Bend-1no., CI Flanged Tee-1no. Blank Flange-1no., CI/ MS flanged Short Piece 0.50 mtr.-1 no, CI/ MS flanged pipe 1 mtr.-1 no. etc as per IS specification and certification for construction of delivery pipe line and wash out line.
13Heavy type 250 mm dia split type tube well cover with 12 mm thick clamping arrangement including holes of column pipe, air pipe and cable entry with 2 sets heavy type suspension clump, nuts, bolts and washer as per departmental design.
14Depth gauge 100mm dia with steel air pipe of required length with all accessories for the above work including supply of good quality hand pump. (This cost includes 15 mm. dia G.I. pipes and specials)
15Pressure gauge (H.Guru/Febig) 150mm dia (0-7Kg/Sq.cm) brass cock and fitting complete. (This cost includes 15 mm. dia G.I. pipes and specials)
1650 mm. dia. non metalic pipes (IS:14930) and specials for protection of submersible cable (as per site requirement)
17Anti snapping safety device for pump set by supplying suitable size MS clamps two sets and nylon rope of required length including supplying of nuts, bolts and all other materials.
18Supply and delivery of 100 Amps male female kit Katfuse unit
19100 Amp 415 V Rewireable type TPN Main Switch.
20Laying of 25 sq. mm. 3.5 core AL. Ar. Cable in wall/ floor by supplying of all necessary materials as per IE Rules and as per direction
21Installation of the materials (to be supplied under above sl no 1.01 to 3.11) such as Pump motor set with column pipes, valves, panel, fiting fixing pressure gauge, depth gauge, Non-return valve & drawing delivery out-let & washout line with the supplied specials / accessories by providing antisnapping cage of suitable size including supply of cable gland,sockets, wooden board, control cable etc including brick, sand, cement rod etc as required to complete the job as per direction and up to the entire satisfaction of the EIC.
22Making brick pillar 0.25 mtr x 0.25 mtr. for supporting of valves and pipes with 12 mm thick plaster and net cement finish complete.
23Supply,delivery of M.S Kiosk box of 661mm x 559 mm (LxW) Size having thickness of 1.5 mm with angle support at four legs having hight of 661 mm with provision of locking arrangement, supply of lock,cable entry point incl painting by one coat of black paint over one coat of primer all complete.
24Making suitable size pump foundation including erection of Kiosk box with supplying of necessary cement, sand and stone chips including plastering and net cement finish complete.
25Making double earthing arrangement in compliance with IE rules by G.I. pipe electrode of 50 mm. dia 3 mtr. Long 2 Nos for panel and pumping machinery 25 mm. x 6 mm. G.I. earth strips from earth pit to panel and all other accessories required to complete the work.
26Making internal electrification of pump house consisting of two bracket point, one tube light point, two bulk head point, one fan point and 1 NO. 74 watt LED fixture with arm bracket at outside and one three pin plug point including supply of all necessary materials to complete the work as per IE rules and as per direction (All the fittings and lamp should be LED type as per choice of EIC)
27Supply and delivery ofPVC Moulded Chair.
28Supply and delivery of PVC Moulded Table.
29Supply, delivery & installation of the following Fan as directed by EIC.Ceiling Fan 1200mm sweep including Fan clamp as and when required.
30Supply & delivery of automatically controlledDiaphargm type Chlorinator for accurate dosing of Chlorine solution into the waterby connecting metering pump ( Diaphargm type) having following specification:- Pump type ::DiaphargmLiquid ::Chlorine solutionCapacity ( LPH) :: 0-100Pressure kg/cm2 ( Testing) :: 10Pressure kg/cm2 ( suction) :: FloodedPressure kg/cm2 ( Hydro) :: 15Connection Suction :: ½” Hose HolderConnection Discharge :: ½: Hose HolderMOC Liquid End :: PPDiaphragm :: PTFENRV :: PPDrive capacity :: 0.5HP, 3 phase, 50Hz, 415V, 1440 RPMMotorCoupling capacity :: Flexible SpiderStrainer :: Y type, PP, ½” BSP (F)Pressure Relief Valve :: Inbuilt.Solution Tank :: 100 ltr capacity ( Including making provision for inlet line to the actual storage tank of dosing solution of all materials. Test & WarrantyCertificatesare to be submitted at the time of delivery
31Installation of above supplied Chlorinator with all accessories, PVC tankand drawing of power line as per IE Rules by supplying PVCcopper wire & continuous earthing. This includes the cost of all necessary CC foundation ( at least 200mm height) with concrete mixture ( sand, cement, stone) and neat cement finish by supplying of all required materials and testing the entire set as perentire satisfaction of the EIC. (Power will be fed from PLC panel of Pumping machinery)
32Commissioning of the installation and trial run for 7 days on full load in automode with full satisfaction of EIC.
33MAKE AS PER DEPARTMENTAL APPROVED VENDOR LIST CIRCULATED VIDE MEMO NO.PHE/IV/2277/W-181/19 DATED- 25/09/2019
34Add GST @ 18%
35Add Cess @ 1%

AI Tender Summary

OUR REF NO 34060980
AUTHORITY Government Departments
TENDER VALUE 8.31 Lakhs
LAST DATE 17-10-2022
Authority
Authority Name Public Health Engineering Department
Work Description Supply, Installation And Commissioning Of Electro-Mechanical Components Of Augmentation Of Daulatpur Water Supply Scheme Tw No. Ii In The District Of Dakshin Dinajpur Under Malda Mechanical Division, Phe Dte.-2 Submersible Pump Directly Coupled With Water Proof Suitable Size Motor Having Following Specification And As Per Nit Specification:Pumpdischarge Of Clear Water = ( Q ) = 30 M3 / Hr.Total Head ( H ) = 58 M.Shaft- Stainless Steelimpeller- S.S / Gmoutlet Size-80 Mmmotorsubmersible Type 3 Phase, 50 Hz, 415V ± 10% , 2900 Rpmmotor Mustbe Suitable For Operation With Star-Delta Startertest Certificate Along With Characteristic Curve Shoule Besubmitted At The Time Of Delivery. 3 1.1 Kv Grade 4 Sq.Mm X 3 Core Water Proofflat Submersible Cable For Above Motor. 4 1.1 Kv Grade 25 Sqmm 3.5 Core Xlpe Insulated Al. Ar. Cable Cable Conforming To Is-7098 ( Part-1 ) 1988 With Upto Date Amendment. 5 Supply, Delivery And Storage At Site Of Wall Mounted 2 Mm. Thick Epoxy Painted Sheet Steel Enclosed Front Open Fully Panel For Fully Automatic Cum Manual Control Centre For Operation Of The Pump Motor In Star-Delta Mode Ranging From 7.5 Hp To 12.5 Hp, Actuator With Dol Starter, Chlorinator With Dol Starter And Timer Operated Outdoor And Indoor Lighting And Also Spares Feeder As Per Approved Drawingand Nit Specification. 6 Supply And Delivery Of The Following Valves, Pipes, Gauges Etc. At Site. 7 80 Mm Dia M.S. Seamless Column Pipe ( Black ) 6.8 Mm To 7.1 Mm Thick With 150 Mm Long Heavy Type Socket At One End. 8 3.00 Mtr. Long Excluding Socket Having 8 T.P.I. Thread. 9 1.5 Mtr. Long Excluding Socket One End Having A Thread Of 11 T.P.I. & The Other End Having A Thread Of 8 T.P.I. 10 Heavy Type Suitabledia Ms Suspension Clamp Along With Nuts Bolts And Washer. 11 Cast Iron Wafer Type Three Phase Actuator ( Rotork Range, Three Phase 415 V, Multiturn Electrically Actuated ) Operated Butterfly Valve Of Dia 80Mm ( P.N-1.0 ) As Per ( Is-13095 Ip-68 ) Test Certificates From Both The Manufacturer Are To Be Submitted At The Time Of Delivery 12 80Mm Dia Cidf Sluice Valve-1 No., Non Return Valve-1 No., Cidf 90° Bend-1No., Ci Flanged Tee-1No. Blank Flange-1No., Ci / Ms Flanged Short Piece 0.50 Mtr.-1 No, Ci / Ms Flanged Pipe 1 Mtr.-1 No. Etc As Per Is Specification And Certification For Construction Of Delivery Pipe Line And Wash Out Line. 13 Heavy Type 250 Mm Dia Split Type Tube Well Cover With 12 Mm Thick Clamping Arrangement Including Holes Of Column Pipe, Air Pipe And Cable Entry With 2 Sets Heavy Type Suspension Clump, Nuts, Bolts And Washer As Per Departmental Design. 14 Depth Gauge 100Mm Dia With Steel Air Pipe Of Required Length With All Accessories For The Above Work Including Supply Of Good Quality Hand Pump. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 15 Pressure Gauge ( H.Guru / Febig ) 150Mm Dia ( 0-7Kg / Sq.Cm ) Brass Cock And Fitting Complete. ( This Cost Includes 15 Mm. Dia G.I. Pipes And Specials ) 16 50 Mm. Dia. Non Metalic Pipes ( Is:14930 ) And Specials For Protection Of Submersible Cable ( As Per Site Requirement ) 17 Anti Snapping Safety Device For Pump Set By Supplying Suitable Size Ms Clamps Two Sets And Nylon Rope Of Required Length Including Supplying Of Nuts, Bolts And All Other Materials. 18 Supply And Delivery Of 100 Amps Male Female Kit Katfuse Unit 19 100 Amp 415 V Rewireable Type Tpn Main Switch. 20 Laying Of 25 Sq. Mm. 3.5 Core Al. Ar. Cable In Wall / Floor By Supplying Of All Necessary Materials As Per Ie Rules And As Per Direction 21 Installation Of The Materials ( To Be Supplied Under Above Sl No 1.01 To 3.11 ) Such As Pump Motor Set With Column Pipes, Valves, Panel, Fiting Fixing Pressure Gauge, Depth Gauge, Non-Return Valve & Drawing Delivery Out-Let & Washout Line With The Supplied Specials / Accessories By Providing Antisnapping Cage Of Suitable Size Including Supply Of Cable Gland, Sockets, Wooden Board, Control Cable Etc Including Brick, Sand, Cement Rod Etc As Required To Complete The Job As Per Direction And Up To The Entire Satisfaction Of The Eic. 22 Making Brick Pillar 0.25 Mtr X 0.25 Mtr. For Supporting Of Valves And Pipes With 12 Mm Thick Plaster And Net Cement Finish Complete. 23 Supply, Delivery Of M.S Kiosk Box Of 661Mm X 559 Mm ( Lxw ) Size Having Thickness Of 1.5 Mm With Angle Support At Four Legs Having Hight Of 661 Mm With Provision Of Locking Arrangement, Supply Of Lock, Cable Entry Point Incl Painting By One Coat Of Black Paint Over One Coat Of Primer All Complete. 24 Making Suitable Size Pump Foundation Including Erection Of Kiosk Box With Supplying Of Necessary Cement, Sand And Stone Chips Including Plastering And Net Cement Finish Complete. 25 Making Double Earthing Arrangement In Compliance With Ie Rules By G.I. Pipe Electrode Of 50 Mm. Dia 3 Mtr. Long 2 Nos For Panel And Pumping Machinery 25 Mm. X 6 Mm. G.I. Earth Strips From Earth Pit To Panel And All Other Accessories Required To Complete The Work. 26 Making Internal Electrification Of Pump House Consisting Of Two Bracket Point, One Tube Light Point, Two Bulk Head Point, One Fan Point And 1 No. 74 Watt Led Fixture With Arm Bracket At Outside And One Three Pin Plug Point Including Supply Of All Necessary Materials To Complete The Work As Per Ie Rules And As Per Direction ( All The Fittings And Lamp Should Be Led Type As Per Choice Of Eic ) 27 Supply And Delivery Ofpvc Moulded Chair. 28 Supply And Delivery Of Pvc Moulded Table. 29 Supply, Delivery & Installation Of The Following Fan As Directed By Eic.Ceiling Fan 1200Mm Sweep Including Fan Clamp As And When Required. 30 Supply & Delivery Of Automatically Controlleddiaphargm Type Chlorinator For Accurate Dosing Of Chlorine Solution Into The Waterby Connecting Metering Pump ( Diaphargm Type ) Having Following Specification:- Pump Type ::Diaphargmliquid ::Chlorine Solutioncapacity ( Lph ) :: 0-100Pressure Kg / Cm2 ( Testing ) :: 10Pressure Kg / Cm2 ( Suction ) :: Floodedpressure Kg / Cm2 ( Hydro ) :: 15Connection Suction :: ½” Hose Holderconnection Discharge :: ½: Hose Holdermoc Liquid End :: Ppdiaphragm :: Ptfenrv :: Ppdrive Capacity :: 0.5Hp, 3 Phase, 50Hz, 415V, 1440 Rpmmotorcoupling Capacity :: Flexible Spiderstrainer :: Y Type, Pp, ½” Bsp ( F ) Pressure Relief Valve :: Inbuilt.Solution Tank :: 100 Ltr Capacity ( Including Making Provision For Inlet Line To The Actual Storage Tank Of Dosing Solution Of All Materials. Test & Warrantycertificatesare To Be Submitted At The Time Of Delivery 31 Installation Of Above Supplied Chlorinator With All Accessories, Pvc Tankand Drawing Of Power Line As Per Ie Rules By Supplying Pvccopper Wire & Continuous Earthing. This Includes The Cost Of All Necessary Cc Foundation ( At Least 200Mm Height ) With Concrete Mixture ( Sand, Cement, Stone ) And Neat Cement Finish By Supplying Of All Required Materials And Testing The Entire Set As Perentire Satisfaction Of The Eic. ( Power Will Be Fed From Plc Panel Of Pumping Machinery ) 32 Commissioning Of The Installation And Trial Run For 7 Days On Full Load In Automode With Full Satisfaction Of Eic. 33 Make As Per Departmental Approved Vendor List Circulated Vide Memo No.Phe / Iv / 2277 / W-181 / 19 Dated- 25 / 09 / 2019 34 Add Gst @ 18% 35 Add Cess @ 1%
Basic Detail
Tender No WBPHED/EE/MLMD/NIeT_13 of 2022-2023
Bidding Type Tender
Location
City malda
State West Bengal
Key Dates
Publish Date 22 Sep 2022
Submission Date 17 Oct 2022
Open Date 19 Oct 2022
Finance
Tender Value 8.31 Lakhs
Tender Fee Ref. Documents
EMD 16624
Exemption Not Available
Document List
e737f5b5-3750-4342-a05a-ffdfd1779c2d.html
BOQ_805851.xls
Panel_Specification_7.5_1.pdf
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Sep 22, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Oct 17, 2022
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Oct 19, 2022

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

e737f5b5-3750-4342-a05a-ffdfd1779c2d.html

xls

BOQ_805851.xls

5_1

Panel_Specification_7.5_1.pdf

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

TenderDetail
Loading tenders