Construction Of Covering For Existing Atrium ( Block-E )
Tender Value
Ref. Documents
Estimated cost
Bid Submission
19 Oct 2022
0 days left
EMD
30420
Bank guarantee accepted
Document Fee
5070
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvananthapuram → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Covering For Existing Atrium ( Block-E )
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing works for Erecting Steel Column |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. |
| 3 | Atrium covering at the first floor level |
| 4 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. As per drawing |
| 5 | Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. as per drawing |
| 6 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 7 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. |
| 8 | Supplying, providing and fixing in position 20mm diameter anchor rod of superior quality make with sufficientt length and nuts to fix the base plate below each vertical supports made up of 113.50 mm x 113.50mm x 5.40 mm thick GI square hollow tubes ( cost of base plate and GI tube will be paid separately) using the procedures as adviced by the manufacturer including cost and conveyance of all materials hire and labour charges etc. complete. (Approved make : HILTI / FISCHER?any other equivalent make) |
| 9 | Providing and Fixing Poly Carbonate solid compact clear sheet 8 mm thick as approved by the Engineer in charge and should be supplied in a single sheet of 2.40m x 1.2 mor as decided by the Engineer in charge. The sheet shall be fixed using self drilling/ self tapping screw of size (5.5 x 55 mm) andthe joints shall be firmly fixed with aluminium profiles and silicon sealent etc. complete upto ant pitch in horizontal/ vertical/ curved surface, but excluding cost of purlins, rafters, trusses, and including cutting to size and shapes whwew ever required. |
| 10 | Platform at Courtyard |
| 11 | Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement: 6 coarse sand) etc complete. |
| 12 | Supplying and filling in plinth with Jamuna sand under floors, including watering, ramming consolidating and dressing complete. |
| 13 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600 x 600 mm. |
| 14 | Providing and laying Vitrified tiles indifferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm. |
AI Tender Summary
Tender Timeline
Sep 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 21, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender