|
| 1 | Supplying all materials, labour, T & P for earth work in excavation of pipe line trenches in all kinds of soil including dressing and leveling the bed and depositing the soil within 50m initial lead and 1.5m initial lift as per the direction of Engineer-in-charge. |
| 2 | Supplying and Laying in trenches centrifugally Cast (Spun) Ductile Iron socket and spigot pipe with internal cement mortar lining and external bituminous coating confirming to IS: 8329-2000 of the following nominal diameter as per specification and direction of Engineer-in-charge including supplying of all labour, material, tools & plants required to perform the work including cost of D.I pipe. (Earthwork in trenches, jointing of pipes, specials & fittings to be measured and paid for separately) |
| 3 | 150mm dia D.I. K-7 |
| 4 | 100mm dia D.I. K-7 |
| 5 | Suppling of all labour, T&P making tyton joints using rubber rings to S.B.R. (Styrene-Butadiene Rubber ) spun iron cast iron pipes & fittings of the following nominal dia including testing of the joints but including the cost of rubber rings as per specification complete. |
| 6 | 150mm Tyton joint |
| 7 | 100mm Tyton joint |
| 8 | Supplying of all materials,labour & T&P for fitting fixing of C.I Mechanical joint sockets and joint Colars conforming to IS 13382/92 to flanged ends of C.I / D.I. Pipes including testing of joints as per specification and direction of E.I.C. all complete. |
| 9 | 150mm C.I. Mechanical joint Colar |
| 10 | 100mm C.I. Mechanical joint Colar |
| 11 | Supplying of all materials,labour & T&P for laying fitting fixing of C.I / D.I. fittings likes Tee, Socket, bend & Tail piece etc as per specification & direction of E.I.C. all complete. |
| 12 | Fixing Cast Iron Sluice Valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 for the following rating and nominal diameters as per specificationcomplete {P.N-1.6 ( IS14846-2000)}including Cost of Sluice Valve ( PN-1.6 without wheel) |
| 13 | 150mm dia Sluice Valve |
| 14 | 100mm dia Sluice Valve |
| 15 | Providing all materials, labour, T&P for construction of brick masonary sluice valve chamber of size 0.9m x 0.9m x 1.5m (av.depth) with earth work in excavation of foundation trenches in hard soil P.C.C (1:3:6) 150mm thicj, Fly ash Brick masonary C.M(1:4), 12mm C.P (1:3) with punning, out side plaster with C.M. (1:3) R.C.C. cover slab of 100mm thick with (1:1½:3), inner hunching centering, shuttering & cost of M.S. rainforcement etc. complete with all taxes, royality, cess, conveyance, curing, earthwork, sand filling, cess etc,.complete as per specification & direction of E.I.C., ( Valve chamber- 4 nos & Flow meter chamber- 1 no.) |
| 16 | Supplying all labour T&P and materials for laying of different dia M.S./ G.I Pipe confirming to IS 3589-2001 and IS:3601-2006 of following dia meter including earth work excavation in pipe line trenches in all kinds of soil & refillingof the pipe line trenches with the excavated materials and welding the pipe line as per the site requirement and making Tee,Bends,& offsets and electric arc welding flanges& fitted with nut & Bolts & Rubber insertion including fitting & fixing of sluice valve & N.R. Vlave at site all complete as per the direction of Engineer-in charge. |
| 17 | 150mm dia M.S. Pipe ( 4.5mm thick) |
| 18 | 100mm dia G.I. Pipe ( Medium) |
| 19 | Supplying all materials labour, T&P for fitting fixing of M.S. fittings as per specification including cutting, welding, grinding, finishing with where ever necessary with all cost of materials, labours, taxes, T&P, energy charges, consumable, conveyance as well as earth work in excavatgion refilling with excavation earth etc as per specification & direction of E.I.C. |
| 20 | 150mm M.S. Off set bend(plain) |
| 21 | 150mm M.S.Tee |
| 22 | 150 x 100 Tapper |
| 23 | 150mm dia Short piece(flange) |
| 24 | 150mm dia Flange ( (10mm thick including cost of nut bolt & other consumables ) |
| 25 | 100mm M.S. Off Setbend(plain) |
| 26 | 100mm M.S. Tee |
| 27 | 100mm dia bend |
| 28 | 100mm dia Short piece(flange) |
| 29 | 100mm Flange (10mm thick including cost of nut bolt & other consumables ) |
| 30 | Providing labour, T&P for cutting of Roads surface by manually for taking water supply line including all taxes, cess etc. all complete as per specification & direction of E.I.C. |
| 31 | C.C. Road |
| 32 | Asfalt road |
| 33 | WBM |
| 34 | Supplying all labour, T&P for filling of pipe line trenches with excavated materials with watering and ramming all complete etc. as per specification & direction of E.I.C. |
| 35 | Supplying all mateials, labour, T&P for restoration of damaged road all complete etc. as per specification & direction of E.I.C. |
| 36 | Sand filling |
| 37 | P.C.C. (1:3:6) with 40mm size hard granite metals |
| 38 | C.C. ( 1:2:4) with 12mm size hard granite chips. |
| 39 | Supplying all mateials, labour, T&P for providing & fixing of Flow meter of reputed make including cost of C.I M/J socketetc all complete etc as per specification & direction of E.I.C. ( 150mm dia ) |
| 40 | Supplying of all materials, labour & T&P for construction of 1 nos of 1.0 lakh ltr capacity GSRwith testing, commissioning with instrumentation, anciallry structures Survey, Soil investigation, design, errection fitting & fixing of valves & special connection of loading and delivery pipes of M.S./D.I. flanged pipes of required dia and jointing materials. Supplying over flow and wash out pipes up to 10mtr length to suit the site condition to GSR including construction of valves chambers as per the P.H. Specification and connecting the rising & distribution pipe line including supply and fixing of ladders, water level indicator, lighting arrestors and other required arrangement required for GSR etc. all complete as per specification and direction of EIC. |
| 41 | Supplying all mateials, labour, T&P for construction of Pump Houseall complete etc. as per specification & direction of E.I.C. |
| 42 | Supplying all materials, labour, T&P for Earthwork in ordinary soil for foundationwithin initial leads & lifts including dressing and levelling of bed etc, complete Etc. all complete as per direction of .E.I.C. |
| 43 | Supplying all materials, labour, T&P forfor P.C.C.(1:3:6) in foundation & plith using 40 mm size b.h.g.c.b metal including mixing of materials and laying in well prepared surface & compacting, watering curing with cost, conveyance, royalities of all materials, T&P and Labour charges etc. complete Etc. all complete as per direction of .E.I.C. |
| 44 | Supplying all materials, labour, T&P for Filling in foundation and plinth with sand watered and rammed including cost of sand & labour.Etc. all complete as per direction of .E.I.C. |
| 45 | Supplying all materials, labour, T&P for R.C.C. M-20 Grade using 20mm to 10mm size crushed stone aggregates mixed by concrete mixer, laying in layers compacting by vibrator and all leads and lifts including frame works etc. complete. Etc. all complete as per direction of .E.I.C. |
| 46 | Supplying all materials, labour, T&P for Rigid & smooth centering & shuttering for R.C.C.works including false work & dismantling them after casting including cost of materials complete Etc. all complete as per direction of .E.I.C. |
| 47 | R.C.C. foudation |
| 48 | Colums,pillars ,Beams,etc.etc. |
| 49 | Roof slab and Chajja |
| 50 | Supplying all materials, labour, T&P for Providing HYSD reinforcement for RCC works including bending, binding & placing in position as per Drawing including cost, conveyance of all materials, all labour and T&P etc complete Etc. all complete as per direction of .E.I.C.. |
| 51 | Supplying all materials, labour, T&P forFirst class Fly ash. bricks of 25cmx12cmx8cm. Size having crushing strength not less than 75 Kg/Sqcm. With dimensionaltolerance +2%. percent in cement mortar (1:6) in superstructure.Etc. all complete as per direction of .E.I.C. |
| 52 | Supplying all materials, labour, T&P for 12mm thick cement plaster in cm (1:6) out side with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.Etc. all complete as per direction of .E.I.C. |
| 53 | Supplying all materials, labour, T&P for 16mm thick cement plaster in cm (1:6) with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.Etc. all complete as per direction of .E.I.C. |
| 54 | Supplying all materials, labour, T&P for 6mm thick c.p. in cm (1:4) Over RCC surface with watering, curing and cost, conveyance royality of all materials & cost of all labour charges etc. complete.Etc. all complete as per direction of .E.I.C. |
| 55 | Supplying all materials, labour, T&P for Cement Washing two coats using cement including cost, conveyance of cement and cost of all labour etc. complete.Etc. all complete as per direction of .E.I.C. |
| 56 | Supplying all materials, labour, T&P for Finishing exterior wall with cement paint of approved shade on new work of two coats including cost of paints and primer and labour charges etc complete.Etc. all complete as per direction of .E.I.C. |
| 57 | Supplying all materials, labour, T&P for 2.5 cm grading concrete (1:2:2) on roof slab with 6 mm size hard granite chips etc completeEtc. all complete as per direction of .E.I.C. |
| 58 | Supplying all materials, labour, T&P for Dressed seasoned sal wood work framed and fixed in frames of doors & windows including cost, conveyance of all materials and labour charges etc complete.Etc. all complete as per direction of .E.I.C. |
| 59 | Supplying all materials, labour, T&P for 32mm Teak wood panelled shutters (of 32mm style with 18mm panel) including cost conveyance of all materials and labour for fitting excluding cost of iron fittings etc complete Etc. all complete as per direction of .E.I.C. |
| 60 | Supplying all materials, labour, T&P for Painting two coats with enamel paints over one coat of primer with approved quality paints & primer to Wood/Iron work including cost of paints & primer, T&P and labour charges etc complete.Etc. all complete as per direction of .E.I.C. |
| 61 | Supplying all materials, labour, T&P for 1\"(2.5cm) A.S. flooring in Cement concrete (1:2:4) using 20mm HGCB chips including neat cement punnin Etc. all complete as per direction of .E.I.C. |
| 62 | Supplying all mateials, labour, T&P for internal electrification ( 3 phase / 1 phase electrical supplywith cables, wirings installation of control pannel boards, testing commissioning etc. complete as per specification & direction of E.I.C |
| 63 | Feeder Power Panel. |
| 64 | Supply, fitting & fixing of Power Feeder Paneloutdoor type having provision for fixing of 100A kit kat -3 nos, 100A MCCB-1 no., with incoming and out going cable management system. |
| 65 | Supply & fixing of 100A 415v Kit Kat |
| 66 | Supply & Fixing of MCCB 100A (Make : L&T/ABB) |
| 67 | Supplying all labour and T&P for fixing of125A MCCB with incoming and out going cable jointing , socketing, insulatingfittingand testing in all respect at site as per direction of Engineer-in-charge. |
| 68 | Supply fitting & fixing of 25 sq.mm x 3.5 core PVC Insulated Solid Aluminium Conductor Armoured Cable. |
| 69 | Power Distribution Control Panel. |
| 70 | Supply & fitting fixingofWall Mounting , lockable, removable side panels with size 4ft X 4ft X 1ftmade out of 16gauge C.R sheet with powder coated colourwith superior cable management facility in extra wide racks Power Distribution Panel having provision for fixing of 5HP Submersible Control Panel -2Nos.,125A Three Pole & Neutral Switch Disconnector Fuse unit-1 no. 100A Bus Bar(4way)- 1no., 32A DP MCB-1 no, 32A FP MCB-1 no,100A Heavy Duty Kitkat-3 nos. etc. as per direction of Engineeer-in-charge. |
| 71 | Supply & fixing ofDigital Volt Meter 0-500V |
| 72 | Supply & fixing of Digital Ampre Meter . |
| 73 | Supply & fixing of C.T Coil |
| 74 | Supply & fixing of LED Indicator Light |
| 75 | Supply & fixing of Power Terminal. |
| 76 | Supply & fixing of 16 sq.mm Copper Cable. |
| 77 | Supply & fixing of 6 sq.mm Copper Cable. |
| 78 | Supply & fixing of 4 sq.mm Copper Cable. |
| 79 | Supply & fixing of 32A Four Pole MCB |
| 80 | Supply & fixing of 32A Double Pole MCB |
| 81 | Supply & fixing of 100A Copper Bus Bar(4way). |
| 82 | 125A Three Pole & Neutral Switch Disconnector Fuse unit suitable for DIN typeFuse links. (Make : L&T ) |
| 83 | Supply & fixing of 125A DIN type Fuse Link (Make:L&T) |
| 84 | Supply & fixing of 16sq.mm Cu. Cable Socket. |
| 85 | Supply & fixing of Pvc Tape. |
| 86 | Supply all labour, T&P materials for fitting & fixing of above materials with all the connections and testing the power distribution Control Panel as per direction in charge. |
| 87 | Recessed / Surface wiring to light point / fan point /Exhaust fan point /call bell point with 1.5 sqmm FR PVC insulated single core multi strand copper conductor of ISI marked with 20 mm dia non-m , MS box with 1.5 sqmm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire -Finolex/L&T/Anchor/Havells/V-Guard) |
| 88 | i) Light Points |
| 89 | ii) 10A Plug Point |
| 90 | iii) Fan Point. |
| 91 | Recessed/Surfacemain wiring along with earth wire with the followiing size of PVC insulated single core multistrand copper conductor of ISI marked conformingto IS-694/1990 in 20mm dia non-metalic heavy duty flexible conduit 1.60mm in surface/recessed PVC conduitas required. (Make of wire: Finolex/L&T/Anchor/Havells/V-guard). |
| 92 | i) 2 x 4.0sq.mm +1 x 2.5 sq.mm |
| 93 | Supply ,fitting and fixing of the following fixtures on existing board / cover and connection as required.(Make - Anchor /Cona ) a) Angle Holder - |
| 94 | Supply and fixing of electronic Fan Regulators . |
| 95 | Supply and fixing of20 watt CFL |
| 96 | Supply and fixing of 28 watt LEDstreet light fitting with necessaryG.I Brakets . |
| 97 | Supply fitting fixing of Ceiling fan of Reputed make. |
| 98 | Sypply of 230mm Exhaust Fan. |
| 99 | Supplying all labour , materials ,tools and plants for installation, testing and commissioning ofChemical earth electrode (2 mtr. & 80mm) including earth work as per direction of Engineer in Charge. |
| 100 | Supply all labour T&P materialsfor laying body earth from earth pit terminal to Main Switchto control panel by earthing with No.8copper wire of required gauge, all the connection end socketing as per direction of engineer in charge. |
| 101 | Supplying all mateials, labour, T&P for installation of open well submersible pump set including supplying & fitting of pannel board & etc. accessaries all complete etc. as per specification & direction of E.I.C. ( 1 set to be kept as standby) |
| 102 | (i) Pump set |
| 103 | ii) Cost of Control pannel |
| 104 | iii) Cost of 2.5mmflat submersible cable |
| 105 | Supplying all mateials, labour, T&P & providing delivery connection includidng testing commissioning of pump set to the existing distribution system ofD.H.H. etc.all complete as per specification & direction of E.I.C. |
| 106 | Supply & Fixing of HDPE Pipe 38 mm dia (OD) 10kg/cm2 |
| 107 | Supply, fitting& Fixing ofG.I Bend 1-1/4\". |
| 108 | Supply, fitting& Fixing ofG.I Socket 1-1/4\" |
| 109 | Supply, fitting& Fixing of 38mm dia Stainless Steel Nipple |
| 110 | Supply, fitting& Fixing of Stainless SteelNut & Bolts |
| 111 | Supply, fitting& Fixing of 38mm dia G I clamp |
| 112 | Supply all labour T&P materials for transportation of materials . |
| 113 | Supply all labour T&P materials for heatingwith fixing of stainless steel Nipple with nut & bolts both side of 38mm dia (OD) HDPE Pipeat site. |
| 114 | Supplying all materials,labour and T&PforFixing of horizontalsubmersible pump set inside the UGR as perdirection of Engineer-in-charge. |
| 115 | Supplying all labour, T&P materials for coupling of three phase submersible pump & motor including cable jointing,socketing, insulating by water proof materials including testing & commissioningat site etc. complete as per direction of Engineer-in-charge. |
