Military Engineer Services-MES has published Improvement To Living-In-Billets At Af Stn Gwalior. Submission Date for this Tender is 22-11-2022. Civil Work Tenders in gwalior Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 28-Sep-2022 | Corrigendum to BOQ | BOQ | 13-10-2022 |
| 2 | 06-Oct-2022 | Dates Corrigendum | Date | 19-10-2022 |
| 3 | 06-Oct-2022 | Corrigendum of BOQ | BOQ | 19-10-2022 |
| 4 | 08-Oct-2022 | Corrigendum IAFW conditions | Other | 19-10-2022 |
| 5 | 19-Oct-2022 | Corrigendum of dates | Date | 15-11-2022 |
| 6 | 15-Nov-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 22-11-2022 |
| Sl. No. | Item Description |
| 1 | Demolition of PCC in ground floor & pavings (including floor tile ) n.exc 15 cm thickness below or above GL, including removing excavatedmaterial upto 2.5 KM distance and depositing where as directed, complete all as specified and directed. |
| 2 | Dismantling floor hearth or wall tiling including cement mortar bedding & removing serviceable material to store and rubbish off the premises complete all as specified anddirected. |
| 3 | M&L, for 25 thick PCC 1:2:4 type B-O using 12.5 mm gradred stone aggregate as in levelling course finished even an fair complete all as specified anddirected. |
| 4 | M&L for non skid colouredceramic floor tiles7- 8 mm thick (square/ rectangular) area of each tiles exc. 0.06 sqm but not exc. 0.11 sqm, in floors etc set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over 15mm thick screed bed in CM (1:6 )complete all as specified and directed. |
| 5 | M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc,set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles overrendering 10 mm thick in CM 1:3 on wall complete all as specified and directed. |
| 6 | Demolition of stone slab and tiles laid bedded and pointed in any mortar orany description or thickness in floor and aprons etc complete all as specified and as directed. |
| 7 | Taking down cement plaster on brick or stone wall etc incl racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed. |
| 8 | M&L 10 mm thick rendering of brick or concrete surface in CM 1:6 etc all as specified and directed. |
| 9 | M&L for rendering 15mm thick in cement mortar 1: 4 on fair faces of brick work/block masonry or concrete surfaces with providing of chicken mesh of width 150mm over repaired goveed surface finished even & smooth withoutusing extra cement complete all as directed. |
| 10 | M&L for renderig 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete of walls, chajja, fins, facia etc upto 3 stories height mixed with water proofing compound (ISI Marked) @ 3% by weight of cement or as per manufacturer"s instructions, finished even and smooth without using extra cement complete all as specified . Note :- 1. Supply on water proofing compound shall be measured and paid separately. 2. Cost of scafolding for rendering is included in this item. 3. Rendering will be done in two layer. Ist layer will be 10-12mm thick and 2nd layer will be 3-5 mm thick complete all as specified anddirected. |
| 11 | M&L Rendering 10 mm thick in cm 1:4 for dado & skirting on brick surfacefor receiving tiles in vertical surfaces all as specified and directed. |
| 12 | M&L Machine cut kota stone slab flooring of size 550x550mm, 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 13 | M&L Machine cut kota stone slabas in skirting/dado 18-20mm thick over backing coat laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 14 | M&LGrinding, rubbing and Mirror polishing on marble/granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed |
| 15 | S&F stainless steel wire cloth 0.63 mm nominal dia of wire and averagewidth of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples fixed in aluminium window/vent complete all as specified anddirected. |
| 16 | S&F chimney bars (straight or camber) bearing bars, tongues or water bars for window frames, window guard bars fixed/welded in flat iron fixed in almn window/plastered wall surface and similar articles conforming to Fe 290 Gde E-165` complete all as specified anddirected. |
| 17 | S&F in repair coloured powder coated 25 mm dia aluminium drapery rod with natural wooden finish and wooden ornamental attachement at both ends and one set ornamental decorative finish wooden clamps etc all as specified and directed. |
| 18 | S&F in repairs vitreous China WC pan pedestal pattern white (excludingflushing cistern and flush pipe) but incl & connecting to trap set & concrete for making good to floor incld Seat linced cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge. |
| 19 | S&F in repairs seat cover of Vitreous china, pedestal pattern water closet including mild steel CP hinges complete all as specified anddirected by Engr-in-charge. |
| 20 | S&F in repairs WC squatting pan “Orissa Pattern” of size 580 x 440mm white with integral foot rest and "S" or "P" traps(cast iron 100mm bore) (excluding flushing cistern & flush pipe) including connection to trap and to flush pipes etccomplete all as specified in SSR and complete all as specified and directed. |
| 21 | Supply and fix in repairs ofPVC flushing cistern 10 ltr capacity valve less symphonic action type low level with and incl ball valve float & handle, waste pipe & fixing accessoriesto wall complete all as specified and directed. |
| 22 | S & F in repairVitreous china wash basin , white , flat back, size 580 x 450 mm, excluding taps waste ,chain and plug and porcelain stopper but incluing brackets, waste pipe and PVC waste coupling and cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed. |
| 23 | &F in repairs vitreous china urinals half stall incld providing and fixing plugs, bedding urinal against wall in Cement Mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around including urinal CP spreader for fixining with 15mm dia pipe (Min weight 60 gms) complete all as specifies and directed |
| 24 | Taking up or down 15mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected. |
| 25 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re-fixing or removal from sitecomplete all as specified andasdirected. |
| 26 | M&L for re-fixing of old steel GI tubing, 15mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified andasdirected. |
| 27 | M&L for re-fixing of old steel GI tubing, 20 mm bore and connections in new or old position (walls, ceiling, floors etc) with and including all new fittings complete all as specified andasdirected. |
| 28 | S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified andasdirected. |
| 29 | S&F GI tubing 20 mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling etc complete all as specified andasdirected. |
| 30 | S&F in repair Brass chromium plated hand faucets with flexible pipe length not less than 1.00 (minium) fixed for EWC/IWC suitable for 15mm bore pipe complete as directed |
| 31 | S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 32 | S & F in repair Bib taps, 15 mm dia, cast copper alloy, fancy type with capstan heads ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed. |
| 33 | S&F in repair fancy type pillar tap 15 mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold"with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and as directed. |
| 34 | S&F 1000 Litre capacity Rotational moulded polyethylene water storage tanks double layered (cylindrical, vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc incl dismantling of old pvc tank and removal to store etc complete all as specified and directed. Make: Sintex/Dhara/Rotex |
| 35 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified anddirected. |
| 36 | Taking down chowkats or frames with shutters(without taking offshutters from frames) areanot exceeding 1.50 Square Metre each, including cutting holes for taking out hold fasts or dismantling brick work & removing from site etc complete all as specified and directed by Engineer-in Charge. |
| 37 | S&F solid PVC door frame of size 50mm x 47 mm made out of 5mm PVC sheet with wood grains printed on if reinforced with MS square tube incl 75mm long MS screws for fixing to walls all as per specified in SSR. complete all as specified and directed. |
| 38 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel’ having a PVC sheet strip’ of 20mm width stuck inside with solvent cement for stiles and both side prelaminated PVCsheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the fame at site as per specification & drawing. complete all as specified and directed. |
| 39 | S&F in repairs of fancy type overhead shower with arm swivel joint chromium plated screwed down 15mm bore Make- Plumber/ Jaquar (ESSCO) or requivalent as approved by GE. |
| 40 | S/F for looking mirrorsize exc 0.60 Sqm & n"exc 1.00 Sqm with 5.5 mm thick,sheet glass selected quality, fixed on wall with screws & necessary fixing arrangement including rounding/ chemfering of glass edges etc complete all as specified & directed. |
| 41 | Supply & fixin repairsheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.Make: Jaquar, Plumber, Marc. |
| 42 | Supply only liquid water proofing compound to incorporate in respective item. |
| 43 | Cutting grooves in brick wall, 75 mm wide and 65mm deep and shaping horizontal face of grooves with cement mortar 1:3complete all as specified and directed. |
| 44 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. complete all as specified anddirected. |
| 45 | M&L for brick work with sub class "B" bricks old size, straight or curved on plan exc 6M mean radius built in CM 1:6 including demolition of brick work built in cement motor of any description complete all as specified and directed by the Engineer-in-Charge. |
| 46 | S&F factory made plain framed paneled shutter 35 mm thick IIndclass HW (any number & Panels) with lock rail and panel of 9 mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on bothface, the size of rail and style kiln seasoned and chemically pressure treated complete all as specified anddirected. |
| 47 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter ,divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as specified anddirected. |
| 48 | S&F 100mm but hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, complete all as specified and directed.. |
| 49 | S & F butt hinges medium weight cold rolled, Stainless steel and fixed 100mm size complete all as specified and directed. |
| 50 | S&F aluminum anodized barrel tower bolts of extruded section & fixed 150 mm long complete all as specified anddirected. |
| 51 | S&F aluminum handles cast type anodized 150 mm size complete all as specified anddirected. |
| 52 | S & F 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed. |
| 53 | Supply and fixing of steel door spring of size 200mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 54 | S&F Aluminium anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 55 | S& F pressed steel frames 125 x 60mm for doors with one or more rebates including necessaryfixing lugs, hinges,lock strike plate etc, complete all as specified anddirected. |
| 56 | M&L for providing cement concrete type C11:3:6 (20mm graded stone aggregate as in filling ofpressed steel door frames complete all as specified and direcetd. |
| 57 | Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following .(a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with WP chemical PIDIPROFF LW of Dr Pidilite as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal it (Bath seal tape product of Dr fixit and grouting around the inserted pipes byu porable Dr fixit bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Dr fixit pidicrete URP on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of Dr fixit bath seal WPC of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC of Dr fixit as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with Dr. Fixit sealing compounds complete. |
| 58 | Dismantling of CI drain pipes,50-100 mm dia jointed in cement motar complete all as specified anddirected. |
| 59 | M&L for 100mm bore sand cast iron pipe,, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall incl testing of pipe etc complete all as specified and directed by Engr-in-Charge |
| 60 | All as per item above but 75mm bore of pipe all as specified and directed. |
| 61 | S&FCI bends bore of pipe 100mm with oval access doors all as specified and directed. |
| 62 | S&F CI bends bore of pipe 75mm with oval access doors all as specified and directed. |
| 63 | S&F 100mm dia CI pipe single/Tee branch pieces(Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed. |
| 64 | S&F 75mm dia CI pipe single/Tee branch pieces(Equal or unequal) ordinary or inverted(spigot or socket type) or with parallel branches and jointed complete all as specified and directed. |
| 65 | S&F stack clamps for 100mm bore sand cast iron pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including blolts and nuts and securing ends of stays to wall or roof complete all as specified and directed |
| 66 | S&F stack clamps for 75mm bore sand cast iron pipe out of 50mm by 5mm flat iron and 16mm dia round iron stays, including blolts and nuts and securing ends of stays to wall or roof complete all as specified and directed |
| 67 | S&F Cast Iron cowl 110mm bore complete all as specified anddirected. |
| 68 | M&L in repair cast iron floor trap, 75mm dia plain with gratingincl jointing with solvent cement cement etc all as specified and directed. |
| 69 | M&L in repair cast iron nahani trap, 75mm dia plain with gratingincl jointing with solvent cement cement etc all as specified and directed. |
| 70 | M&L for 50 mm thick PCC (1:3:6) type C-2 using 40mmgraded stone aggregate as in plinth protection laid in alternate panels, finished even and smooth without using extra cementcomplete all as specified and directed. |
| 71 | M&L machine pressed precast precast concrete rubber moulded interlocking coloured paver block of any shape and size confirming to IS 15658- 2006 of 60 mm thickness, M-35 grade with grey cement and no pigment etc all as specified and directed. |
| 72 | S&F sand filling under floors or in foundation including watering and consolidation etc all as specified and directed. |
| 73 | M&L for 75 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as insub base, surface finished fair and evencomplete all as specified & directed. |
| 74 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 80 to 100 mm from columns, beams and similar structural members cutting edges cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete all as specified anddirected. |
| 75 | M&L for removing loose and broken concrete by chiselling /picking etc upto a depth of 10 to 20 mm from floor/roof slab/chajjasand similar structural members cleaning the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure and removal of debries to a distance not exc 50 M all as specified and directed by Engr-in-Charge, including necessary scaffolding etc complete all as specified anddirected. |
| 76 | M&L mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified anddirected. |
| 77 | All as per item above but 6 to 8 mm dia all as specified and directed |
| 78 | All as per item above but 5 to 10mm dia as in stirrups, spacers all as specified and directed |
| 79 | M&L for applying one coat of anti corrossive primer @ 0.25 Lit/Sqm for the steel area to exposed old and new reinforcement to the full circumfrance and length of bars to form unbroken 40 Micron thick film all as specified and directed by Engr-in-Charge. |
| 80 | M&L for applying one coat epoxy bonding agent @ 2.6 sqm/lit oras per manufactures instruction to old concrete surfaces all as specified and directed by Engr-in-Charge to surfaces of columns, beams and similar structural members all as specified |
| 81 | M&L for non shrink, cementitous micro concrete mixed with 12.5 graded stone aggregate using Renderoc RG or equivalent by weight (18 Kg Aggregate :25 Kg Renderoc RG) respectively (as per manufatures instruction) laid in average thickness 80 to 100 mm in surfaces of columns, beams and similar structural members including use and waste of water tight form work to facilitate pouring of micro concrete all as specified and directed by Engr -in -Charge. (Make :- Fosroc or Equivalent) |
| 82 | M&Lfor spraying curing compound as per manufactures instruction on freshly cast concrete surfaces all as specified. Make : Concure WB white of Fosroc or equivalent |
| 83 | M&L for application of high build polymer cement sand mortar 1:3 with water cement ratio 0.35 to 0.45 mixing with Nito bond SBR @ 5 ltrs per 50 Kg cement on ceiling / chajja surfaces 10 to 20mm thick in two layers over slurry priming coat of 1 volume Nito bond SBRto 1 volume water, 3 volume fresh cement (5 sqm per litre Nito Bond SBR) etc all as per manufacturers instructions, including painting/finishing to match with the existing complete all as specified and as directed by Engineer-in-Charge. [ Note : Nitobond SBR shall from Fosroc chemical (India) Pvt Ltd or equivalent chemicals of MC Bouchemics/Beck] |
| 84 | Cutting holes into or through brick walls build in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 with mixing of Crack X Paste 201 of Dr Fixit or equivalent as approved by Engr-in-Chargeas per manufacturers insctuction as required for superficial area exc 150 sqcm but n. exc 400 sqcm complete all as specified and directed |
| 85 | Demolation of RCC beam, staircases, landing, chajjas and similar suspended work etc all as specified and directed. |
| 86 | M&L for RCC 1:1.5:3 (Nominal Mix) type B-1 using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs,beams, chajjasand in shelves and the like incl weathering, slightly rounded or chamfered angles, throating and dirceted and other similar works including necessary form work complete all as specified anddirected. |
| 87 | Complete removal of existing treatment by scrapping with machnical wall sander (having mechanical vacuum mechanism) with sanding pad of appropriate grit to make the surface clean, free from dust, loose paint etc. by skilled labour complete all as directed. |
| 88 | M&L for providing and applying minimum 1 mm thick wall care putty over prepared surface to achive the surface even and smooth for painting etc all as specified and directed. |
| 89 | M&L for preparation of new treated surfaces (plastered or unplastered) of walls including cornices, pilasters etc and applying two coat of oil emulison distemper (OBD) complete all as specified & directed. |
| 90 | M&L for two coats of white wash on newly plastered surfaces of ceiling including nesessary preparation of surfacesall as specified and directed. |
| 91 | M&L for preparation of new treated surfaces (plastered or unplastered) of walls including cornices, pilasters etc and applying two coat of cement base paint complete all as specified & directed. |
| 92 | M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 93 | M&L two coat synthetic enamel paint over one coat of red oxide on new steel surface of any description not otherwise described over 10 cm width or girth complete all as specified and directed. |
| 94 | Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed. |
| 95 | Preparation of olddecorated surfaces of ceiling including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, ,ass and effloresent salts and treating out greasy spots and applying one coat of white wash, complete all as specified and directed. |
| 96 | Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of oil bound distemper (OBD) complete all as specified and directed. |
| 97 | Preparation of olddecorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of cement base paint, complete all as specified and directed. |
| 98 | S&Fincludingfabricating of aluminium powder coated having minimum thickness of powder coating 50 micron fordoor / window/ ventilator frame, shutters & partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or flooretc., aluminium sections as approved by GE complete all as specified and directed. |
| 99 | M&L applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistant, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old surfaces etc all as specified and directed.(Note:- primer and emulsion to be carried out through air less machine ie Mechanical means) |
| 100 | S&F for 5.5 mm thick figured glass pin head typeand glazing with oil putty or wooden beads square area n exc 0.5 sqm in each pane complete. |
| 101 | Supply only 5.50 mm thicksheet glass ordinary quality frosted on one side for aluminium doors and fully glass partition in squaresnot exc 0.50 Sqm in each pane etc,complete all as specified. |
| 102 | Taking down carefully existing unserviceable copper/ aluminium point wiring of any description & in any position with and includingpvc/steel conduit all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings call bell, lamp holders etc and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. NOTE: Old fittings/fixtures/accessories like switch, sockets, lamp holders, regulators light fittings etc found in serviceable condition shall be removed carefully for reuse in the work and shall be paid for separately under appropriate item of Schedule `A’. |
| 103 | Material and labour for point wiring for one light /fan/Exhaust fan point controlled by one switch with using 1.5 Sqmm (nominal area) stranded copper conductor, single core, PVC insulated & unsheathed cable, 1100 volts grade in and including concealed PVC conduits (Medium grade) of size not less than 20 mm dia all as directed with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with laminated top sheet of 3 mm thick for housing of switchws, sockets, regulators etc including all accessories andusing 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. NOTE :-(I) The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size fixed on ceiling surface with using PVC rawl plugs. (ii)Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A". (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thicklaminated sheet fixed with suitable brass screws and cup washers |
| 104 | Description same as per above but,point wiring for 5 pin switch socket outlet combination, 5/6 Amps on independent board.complete all as specified and directed.. |
| 105 | Description all as per item No 2.02above but point wiring for one5 pin socket outlet,on same board . |
| 106 | Description same as per Srl item No 2.02above but,point wiring for one six pin switch socket outlet combination, 15 Amps & 5 Amp (independent) with using 2.5 Sqmm (nominal area) stranded copper conductor and2.5 Sqmm (nominal area) stranded copper conductor single core conductor, PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed. |
| 107 | One light point controlled bytwo way switch complete all as specified and directed. |
| 108 | M&L for switch flush type single pole Two way 5 Amps 240 volts, white ivory finish complete all as specified and directed. |
| 109 | M & L forswitch flush type single pole one way 5 Amps, 240 volts, white ivory finish complete all as specified and directed. |
| 110 | M&L for socket outlet 2 in 1, 5 pin, 6 Amps flush type white ivory finish complete all as specified and directed. |
| 111 | S&F switchsocket combination multi purpose, 5 Pin 6 amps, flush typeWith Indicator complete all as specified and directed. |
| 112 | S&F switchsocket combination multi purpose, 6 Pin 6/16 amps, flush typeWith Indicator complete all as specified and directed. |
| 113 | M&L for ceiling rose surface Bakelite two to three terminal, 18 x 50 mm complete all as specified. |
| 114 | M&L for lamp holder insulated body with back plate for batten fitting complete all as specified and directed. |
| 115 | Supply and Fixing step type electronic fan regulator single phase ,230 volt, 100/120 watt complete all as specified and directed. |
| 116 | Supply & Fix for decorative slim linear LED tube light fitting 01x20 watt light with co extruded polycarbonate body, environmental frendly, energy efficient ready to use pack with all accessories including 01 No 20 watt tube rod and connecting the same to ceiling rose with using copper conductor 24/0.20 flexible PVC sheathsd and fixing arrangement for fixing the light fitting to wall/ roof surface complete all as specified & directed by Engineer in-charge |
| 117 | Supply and fixing Street/Security light fittings 1X35W new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 roadway luminaire with high power LED as light source with acrylic cover suitable for pole dia O 40mm(Max) with complete (40 mm GI pipe light grade ),clamp,nut-bolt and washers complete all as specified and directed. |
| 118 | Dismaintling & Taking out MCB DBs VTPNany size , any type and capacity complete all as specified and directed. |
| 119 | Supply and fixing of sheet metal enclosure Double door for DB’s 8 way 240 volts with 200 Amps rated bus bar for single phase and neutral supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed. |
| 120 | Supply and fixing of sheet metal enclosure Double door for DB’s 4 way 415 volts with 200 Amps rated bus bar for TPN supply complete fixed properly on in concealed position and to connect their incoming/outgoing electric connections by means of suitable sizes of lugs/thimbles and to provide required sizes of flexible conduit at any open surfaces near DB’s of cables/wires complete all as specified and directed. |
| 121 | Disconnecting and taking down old unserviceable MCCB/DBs VTPN Unit of any description and in any position and Supply and fixing factory made epoxy powder coated distribution board TP & N 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts including provision for housing MCCB in the incoming and MCBs in the out goingcomplete all as specified & directed conforming to IS : 8623(NOTE: Old existing MCCB DB"s VTPN of any type retrieved from the site shall be deposited in MES store yard as directed. |
| 122 | Dismaintling & Taking outMCB"s/Isolator & metal clade box any size , any type and capacity complete all as specified and directed. |
| 123 | S&F MCB single pole 6 to 30 Amps, "B" series10 KA ,240 Volts complete all as specified and directed. |
| 124 | S&F MCB Single pole and neutral 40 to 63 Amps, "B" Series240 Volts complete all as specified and directed. |
| 125 | Supplying & fixing MCB,40 to 100 Amps, 50Hz, 415 Volts with rupturing capacity 10 KA "C" curve complete all as specified and directed. |
| 126 | Supplying & fixing MCCB, 3 pole, 125 Amps, 50Hz, 415 Volts with rupturing capacity 16 KA with thermal magnetic release and adjustable overload setting having type DPX 160 fixed in distribution board, conforming toLegrand cat part No420096 or equivalent of Siemens /ABB complete all as specified & directed. |
| 127 | Disconnecting& taking up or down unserviceable sub main wiring of aluminium/Copper conductor with two run of single core cable and one run of single core earth cable of any description, any size & in any position including taking out existing conduits of any description and making good the disturbed surfaces to the existing surfaces all as specified and directed.(NOTE:Two run of single core PVC cable with one run of earth conductor shall be measured as one unit.) |
| 128 | M&L for surface/concealed sub main wiring as required with two single core FR PVC insulated and unsheathed copper stranded conductor of size 4 Sqmm 1100 Volts and one run of copper stranded conductor of size 4 Sqmm for continuous earthing drawn in rigid non metallic PVC conduit pipe ISI marked of size not less than 20 mm dia including to connect their incoming/outgoing electric connections by using required sizes of lugs/thimbles as well as flexible conduit of suitable sizes shall also be used at any open surfaces of conductor complete all as specified and directed. Note :- 1.Note Two single corecable and one run of earth copper conductor will be measured and paid as one unit length.2.PVC conduit pipe and PVC fittings will be measured and paid separately in respetive items. |
| 129 | M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 6.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductorof size 6.00 Sqmm as earth continuity conductor all as specified and directed.(NOTE :(i) Two run of single core PVC cable with one run ofearth conductor and conduit shall be measured as one unit.) (ii) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface complete all as specified and directed. |
| 130 | M&L for sub main wiring using two single core PVC insulated, unsheathed stranded copper conductor cable of size 10.0 Sqmm of voltage rating upto and including 1100 Volts grade in and including conceled PVC conduit, med grade of size not less then 25 mm bore along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductorof size 10.00 Sqmm as earth continuity conductor all as specified and directed.(NOTE :(i) Two run of single core PVC cable with one run ofearth conductor and conduit shall be measured as one unit.) (ii) The quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface complete all as specified and directed. |
| 131 | M&L for single pole and neutral enclosure with a two pin and earth plug and socket complete in metal clad board (Industrial type) with one single pole MCB of capacity 20 Amps, 240 Volts complete fixed on wall by provisioning of suitable sizes of MS strips, nuts, bolts and washers taking down of AC boxcomplete all as specified and directed. |
| 132 | Taking down carefully from existing place forceiling fan/ Exhaustfan and removing to MES store yard Scraping,cleaning & painting with two coats of super enamelled paints (as approved by GE) greasing/oiling and refixing at site complete incl electric connection withthree core flxible wire 1.5 sqmm complete all as specified and directed. |
| 133 | Taking down carefully from existing place for re use geyser by disconnecting elect /water supplyconnection and refixing the same after civil work incl all elect /water supply connection connecting with suitable wire all as specified and directed by Engineer-in-Charge. |
| 134 | M&L for earthing complete with MS Galvanised earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level)with top edge of plate not less than 1.5 mtr below normal ground level including necessary excavation, earth work ,charcoal, salt etc and connected to GI earthing lead wire 4 mm dia by means of GI bolt nuts check nuts washers etc and 20 mm dia GI light grade watering pipe with funnel, wire mesh etc including PCC (1:3:6) type C-1 using 20 mm graded stone aggregate earth pit with 40x40x6 mm mild steel angle iron frame, RCC cover (1:2:4) type B-0, 50 mm thick reinforced with 8 mm dia round bar @100 mm centre to centre both ways with mild steel handle 12 mm dia, plastering 12 mm thick in cement mortar (1:6) internally and upto 150 mm below ground level externally, and GI earth lead wire 4 mm dia and 15 mm dia GI protection pipe medium grade from earth plate to test point upto 7.5m length all as shown in electrical plate No 3 of SSR Part -I 2009 and connected to earth test point including testing completeall as specified& directed. |
| 135 | S&F in replacement of exhaust fan steel body AC single Phase 230V of size 300 mm sweep with blades and frame and louvers complete all as specified and directed. Make: Havells/ CG/ Bajaj |
| 136 | Supply, Installation ,commissioning of water cooler fully stainless steel,electric driven single phase having approx storage and nominal cooling capacity of 40/80 Ltrs complete all as specified and directed. |
| 137 | S&F Pipe GI Medium Grade including 25mm bore complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
