Construction Of Doctors Quarter At Phc Kehripora Kokernag
Tender Value
77.68 Lakhs
Estimated cost
Bid Submission
01 Oct 2022
0 days left
EMD
1.55 Lakhs
Bank guarantee accepted
Document Fee
1600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kokernag → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Doctors Quarter At Phc Kehripora Kokernag
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches for foundations, drairns, pipes,cables etc (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed by engineer in charge. All kinds of soil complete job. |
| 2 | Supply and laying of Stone soling hand packed broken stones in layers including carriage complete job. |
| 3 | Providing and laying in position cement concrete. All works upto plinth level 1:4:8 (1 cement: 4 coarse sand:8 graded stone aggregate 40mm nominal size) crushed including all carriages complete job. |
| 4 | Providing and laying in position cement concrete in 1:15:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 40mm nominal size) crushed.including carriages of all materials involved.complete job. |
| 5 | Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding(TMT Bars) including all carriages complete job. |
| 6 | Centringand shuttering includingstrutting propping etc. and removal of form for foundation work upto plinth level complete job. |
| 7 | Centringand shuttering includingstrutting propping etc. and removal of form for beams and slab complete job. |
| 8 | Centringand shuttering includingstrutting propping etc. and removal of form work in staires complete job. |
| 9 | Coursed rubble stone masonary with hard stone in foundation and plinth including curing complete with cement mortar 1: 6 ( 1 Cement : 6 Coarse Sand) including carriage of all material complete job. |
| 10 | Extra for face dressing of stone ( Rough Chesling) exterior wall complete job. |
| 11 | Dry RR masonry including carriage of all materials complete job |
| 12 | Brick work class designation 7.5 in foundation and plinth including curing in cement mortar 1:4 ( 1 Cement : 4 Coarse Sand) mix including all carriages of all material complete job. |
| 13 | Providing wood work in frames of door windows clestory windows and other frame wrought framed and fixed in position with hold fast lugs or with dash fastener of required diameter and length (holdfast lugs or dash fastens shall be paid separately with 1st clas kail wood including all carriages complete job. |
| 14 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge 1st class Kail wood. (Note: -Butt hinges and necessary screws shall be paid separately). windows 35mm thick |
| 15 | P/F 4.0mm thick glass panes (weighing not less than 10KG/Sqm) with all fixtures, all complete job. |
| 16 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge. First class kail wood complete job. |
| 17 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood 35 mm thick |
| 18 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cemet concrete block 30x10x15 cm 1:3:6 mix (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size). |
| 19 | P/F aluminium sliding door bolts ISI marked anodised (anoidic coating not less than AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws complete job 300x16 mm |
| 20 | P/F of aluminium handles 1SI marked as per 15 1868 tronsparent or dyed to reqd colour with necessary screws etc complete job ( 150 mm) |
| 21 | P/F of aluminium handles 1SI marked as per 15 1868 tronsparent or dyed to reqd colour with necessary screws etc complete job ( 100 mm) |
| 22 | P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd colour with necessary screws etc complete job (150X10 mm) |
| 23 | P/F of aluminium tower bolts ISI marked as per IS 1868 transparent or dyed to reqd colour with necessary screws etc complete job (100X10 mm) |
| 24 | Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 25 | Painting with synthetic enamel paint of approved brand and manufocture of required color to give an Even shade. Two or more coats on new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture. On wood work. |
| 26 | 12 mm thick cement plaster of 1:6 mix ( 1 Cement : 6 Coarse Sand) on walls etc including carriages complete job. |
| 27 | Providing and applying wall putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete |
| 28 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work |
| 29 | Cement concrete flooring 1:2:4 (lcement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick |
| 30 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement:4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing. curing. moulding and polishing to edges to give high gloss finish ete. complete at ll levels. Granite of any colour or shade. (Area of slab over 0.5 sqm) 16mm thick |
| 31 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm Thick bed of aement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 32 | Providing and fixing Ceramic glazed floor tiles (anti-skid) 30cmx30em (thickness to be specifiedby the manufacturers) of 1st quality conforming to IS:13755 of NITCO, ORIENT, SOMANY, KAJARTA or equivalent make in color such as white, Ivory, Grey, Fume Red, Brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete |
| 33 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the anufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in all olors and shades, laid on 20 mm thick cement mortar 1:4 (1 cement:4 coarse sand) including grouting the joints with white cement and matching pigments etc. Complete. Size of tile 60x60cm |
| 34 | Structural steel work welded in built up sections, trusses and framed work, including cutting, hoisting. fixing in position and applying a priming coat of approved steel primer all complete |
| 35 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as Teved by Engineerin-Charge) 0.50mm+/- 5% total coated thickness (TCT), Zinc coating 120gsm as per /7 in 240 mpa steel grade5-7microns epoxy primer on both sides of the sheet and polyester top 5-18 microns.The sheet shall be fixed using self drilling/self tapping screws of size (5.5 x55mm) hEPDM seal or with polymer coated J or L hooks.bolts and nuts 8mm diameter with bitumen and G. pet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal /vertical or curved surfaces |
| 36 | Providing ridges or hips, valleys of 60-70cm width precoated plain GS Sheets fixed with polymer coated j or L hooks, bolts and nuts 8mm dia GI Limpet and Bitumen washers complete |
| 37 | Providing and fixing GI sheets 1.0 mm thick including fixtures and carriage all job complete for soffite and eaves boarding |
| 38 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1cement:3sand:6aggregates) 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing including carriage of all materials complete |
| 39 | Providing and fixing water closet squatting pan (Tndian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.c. flushing cistern, including flush pipe, with manualy controlled evice (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required (Jaquar or Equivalent as per Make List) white vitreaous chian orrisa pattern W.C Pan of size 580x440mm with integral type foot rests |
| 40 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.c. flushing cistern including flush pipe with manualy controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied, W.C. pan with ISI marked white solid plastic seat and lid. |
| 41 | Providing and fixing wash basin with C.I. brackets, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required. white vitreousd cvhine wash basin 630x450mm with 2 pair of 15mm C.P.Brass pillar taps |
| 42 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 43 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular shape 453x357 mm |
| 44 | Providing and fixing soil, waste and vent pipes Is 13592 & fittings (TS: 14735 ) suitable to rubber ring .its, which includes plain bends, door bends, sockets, rubber ring, jointing. junctions, clean out plug, CowIs, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating, trap of self cleansing design.etc. complete including jointing. 75 mm dia. PVC SWR socketed pipe with rubber ring joints as per ( IS : 13592 type - B (Astral/Supreme/Ajay/Prince pipes) |
| 45 | Providing and fixing soil, waste and vent pipes Is 13592 & fittings (TS: 14735 ) suitable to rubber ring .its, which includes plain bends, door bends, sockets, rubber ring, jointing. junctions, clean out plug, cowIs, reducers, offsets, collar, M.S holder-bat clamps, access pieces, floor traps i/c steel grating, trap of self cleansing design.etc. complete including jointing. 110 mm dia. PVC SWR socketed pipe with rubber ring joints as per ( IS : 13592 type - B (Astral/Supreme/Ajay/Prince pipes) |
| 46 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharg PN - 16 pipe, 25 mm OD ( SDR - 7.4 ) |
| 47 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharg PN - 16 pipe, 32 mm OD ( SDR - 7.4 ) |
| 48 | Providing and fixing ball valve ( Brass ) of approved quality of required dia. |
| 49 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank TSI: 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes/ ball cock, complete job 2 Nos with 2000 litre capacity each |
| 50 | Providing and fixing PPR Unions 25 mm complete job. |
| 51 | Providing and fixing PPR Unions 32 mm complete job. |
| 52 | Providing and fixing PPR Ts 25 mm complete job. |
| 53 | Providing and fixing PPR Ts 32 mm complete job. |
| 54 | Providing and fixing C.P brass bib cock of approved quality. (Jaquar or Equivalent as Per Make List). 15mm nominal bore |
| 55 | Providing and fixing C.P. brass angle valve for basin mixer and geyser/cistern points. (Jaquar or Equivalent as Per Make List), 15mm nominal bore |
| 56 | Providing and fixing CP. brass Basin Mixer 15 mm Nominal Bore (Jaquar or Equivalent as Per Make List) |
| 57 | Providing and fixing CP. brass Wall Mixer (Jaquar or Equivalent as Per Make List, (Jaquar or Equivalent as Per Make List) |
| 58 | Constructing brick masonry chamber/manhole with common burnt clay (non modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement: 4 coarse sand) C.I. cover with frame & hinges (light duty) 455x610 mm internal dimensions i/e padlock arrangemet, fixed in 1:1.5:3 mix, inside plastering 12 mm thick with cement mortar 1:3 (1 cement 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:) |
| 59 | Providing and fixing of geysers of approved make and brand (jaquar, Racold, AO Smith, venus) incl all fixtures compete job. ( 50 Litre ) |
| 60 | Providing and fixing of geysers of approved make and brand (jaquar, Racold, AO Smith, venus) incl all fixtures compete job. ( 25 Litre ) |
| 61 | P/F of 12 mm thick wooden panels on walls/ceiling with 2-3 coats of wooden polish including base/fremework (12mm ply ) in budloo/russain/silver wood etc incl all carriages, complete job |
AI Tender Summary
Tender Timeline
Sep 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedOct 01, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedOct 03, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender