Construction Of Common Facility Center ( Cfc ) Multi Disciplinary Training Studios For Handloom At Pashkum
Tender Value
Ref. Documents
Estimated cost
Bid Submission
29 Sep 2022
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
pashkum → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Common Facility Center ( Cfc ) Multi Disciplinary Training Studios For Handloom At Pashkum
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by manual means in trenches forfoundation ,drains,pipes,cables etc. (not exceeding 1,5 mtr in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm onplan, depth upto 1.5mtr including disposal of excavated earth upto 1Mtr from cutting edge, disposed earthto be leveled and neatly dressed.All kind of soil |
| 2 | Earth work in excavation by manual means in trenches forfoundation ,drains,pipes,cables etc. (not exceeding 1,5 mtr in width) and for shafts,wells,cesspits and the like not exceeding 10 sqm onplan, depth upto 1.5mtr including disposal of excavated earth upto 1Mtr from cutting edge, disposed earthto be leveled and neatly dressed in Ordinary rock. |
| 3 | Soling stone into hand packedt Excluding Cost of stone. |
| 4 | Providing and laying in position cement concrete of specifiedgrade includingthe cost ofcentering and shuttering . All work upto plinth level1:4:8 ( 1 cement: 4 coarse sand: 8 gradedstoneaggregate 40mm nominal size),including all carraige from source to site of work complete. |
| 5 | Providing and laying in position cement concrete of specifiedgrade includingthe cost ofcentering and shuttering . All work upto plinth level1:3:6 ( 1 cement: 3 coarse sand: 6 gradedstoneaggregate 40mm nominal size),including all carraige from source to site of work complete. |
| 6 | Filling available excavated earth (including rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m. |
| 7 | Dumping stone filling including cost of stone in horizontal on level,including all carraige from source to site of work complete. |
| 8 | Reinforced cement concrete work in walls (any thickness) incld attached pilasters, buttresses, plinth and string courses, fillets, columns pillars, piers, abutments, posts and struts etc upto floor five level including cost of centring, shuttering, finishing and reinforcement 1:2:4 (1cement : 2corase sand : 4graded crushed stone agg. 20mm nominal size) ,including all carraige from source to site of work complete. |
| 9 | Reinforcement for RCC work including straightening, bending, cutting, placing in position and binding all complete.Hot rolled deformed bars.,including all carraige from source to site of work complete. |
| 10 | Providing and fixing up to floor five level precast cement concrete solid blocks including hoisting and setting in position with cement mortor 1:3 ( 1 cement: 3 course sand ) cost of required centering , shuttering andcomplete.1:3:6 ( 1 cement :3 course sand : 6 graded stoneagg, 20mm nominal size ) crushed.,including all carraige from source to site of work complete. |
| 11 | Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia complete 2nd class kail wood. |
| 12 | Providing and fixing paneled or paneled andshutters for doors windows and clerestory windows including ISI marked black enameled M.S butt Hinges with necessary screws exclude paneling which will be paid for separately1st class kail wood for 35mm thick |
| 13 | 15mm thick cemnt plaster 1:4 mix (1 cement;4 fine sand ) ,including all carraige from source to site of work complete. |
| 14 | Providing and applying white cement based putty of average thickness2 mm of approved brand and manufacture , over the plastered wall surface to prepare the surface even and smooth complete. |
| 15 | Distempering with oilwashable temper of approved brand and manufacture to give an even shade new work (two or more coats) over and incld. ing coat with cement primer. |
| 16 | Cement concrete flooring 1:2:4(1 cement :2 courses and4:graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc.complete.50mm thick with 20mm nominal size stone aggregate. ,including all carraige from source to site of work complete. |
| 17 | Applying preming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 18 | Paintingwith synthetic enamelp[aintof approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand & manufacture. |
| 19 | Providing hoisting and fixing trusses/purlins/ rafters/ posts/ post plates or like components of 1st class budloo/ fir wood including cost of screws etc complete |
| 20 | Providing corrugated G.S. sheet roofing fixed with polymer coated J or L hooks, bolts & nuts 8mm diameter with bitumen & G.I. limpet washers filled with white lead and incld. a coatof approved sheet er and two coats of approvedon over lapping of sheets complete (upto a pitch of 60 degrees), excluding. the cost of purlins, rafters & trusses 0.63mm thick with zinc coating not less than 275gm/sqm. |
| 21 | Providing wood work in frames of false ceiling, partition etc sawn and put up in position, Ist class Budloo/fir wood |
| 22 | Providing & fixing 12mm thick Teakply wood for wall andceiling includingIst Class Kail wood cornice and nails complete |
| 23 | Providing & fixing ornimental cornice (2\"x2\") includingnails complete. |
| 24 | Providing and fixing lSI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm. |
| 25 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :250x10mm |
| 26 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. :150x10 mm |
| 27 | Providing and fixing Aldraps 6 inch.with necessary screws etc. complete. |
| 28 | Providing and fixing Aldraps 4 inch.with necessary screws etc. complete. |
| 29 | Providing and fixing of Aluminum for partition of 75mm wide top and bottom and sides25mm including cost of glass panes of thikness of 8mm including rubber sealing with fitting items complete job.(Direction as per incharge Engineer) |
| 30 | Providing and fixing ornamental Shingstak (Tukulpakchay) ladakhi wood carving over main entrance gate of ist class kail wood including glossy polish in sequence complete. (Design as per direction of Engineer- in-charge. |
AI Tender Summary
Tender Timeline
Sep 21, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedSep 29, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedSep 30, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender